How can the bracelet be bright, and how can the Bodhi bracelet become brighter and brighter?

Generally, this is fine, but if it is particularly rare, there is a more targeted plate method.

Care attention. Bracelets such as small-leaved red sandalwood, sea yellow, and yue yellow are not easy to deform and crack due to their delicate wood and high oil content. You don't need to put any oil on the plate.

1.Rubbing it with a soft cotton cloth for a week is also considered polishing. If it is a small leaf red sandalwood bracelet, there will be red marks on the surface of the soft cloth at this time, which is normal, and the color will fade after a week.

2.Leave in the shade out of nature for a week. Allow the beads to dry naturally, while the surface is evenly exposed to air to form a fine and uniform oxide protective layer.

3.Start the handpan, at this time the hands must have just been washed and have been dry, sweaty hands please do not directly plate, it is best to wear cotton gloves, dry hands and micro hands can be directly plated. Note that the beads must be coiled around the orifice.

You can plate for about 30 minutes a day, and after a week to two weeks, you can feel a slight stickiness when drying the beads, which is actually the beads have formed a thin layer of pulp.

4.After the slurry is formed, it can be left for a period of time and then dried naturally, which also allows the slurry to harden to a certain extent. Usually it is about a week.

5.Repeat the above process over time, i.e. 3 months, and you will see that your beads have a very aura luster. The good beads of the disc sometimes show strong reflections, and some of them resemble the luster of glass.

Special care should be taken that the wood beads should not come into contact with large amounts of moisture at any time. If the beads are dirty, you can wipe them a few times with a slightly damp cotton cloth. Then leave it for a while and then play with it, trying to reach all areas of the beads as much as possible, especially the orifice.

Summer is the high incidence period of the problem of fading of new wooden beads, and sweaty hands are not suitable for wearing wooden beads for a long time in summer, so you can wear them for two days and then let them dry in the shade for two days.

The most taboo thing about the beads is to rush for quick success, you can only take your time, one process at a time, and you can also get a kind of spiritual pleasure at the same time with the change of the beads.

Wooden Buddha bead plate play taboo:

1. Do not get any grease, including oil on your hands.

2. Don't sweat profusely.

3. The moisture is particularly large and can not be beaded, and the dampness will "pinch the hair" beads, and the previous efforts are in vain.

4. The beads cannot be buckled with fingernails.

5. You can't put it down after the plate is finished, and you need to wipe it with a muslin cloth.

6. Do not violently disburse, and avoid the beads colliding vigorously when coiling the beads.

7. It cannot be wet, let alone washed.

8. It cannot be exposed to the sun, and the red sandalwood will turn white and crack easily after long-term exposure.

The method used is definitely different depending on the material.

The material is different. It's a different way. But you have to play it all the time.

A general idea is to make Bodhi by rubbing and playing.

The oil secretion of the bracelet forms a pulp, and then the pulp appears to a certain degree of jade, so that the Bodhi bracelet presents a texture that resembles jade and is not jade, and is oily and moisturizing.

For the newly started Bodhi, we can first rub the surface of the Bodhi with something slightly coarser such as a bath towel, and polish off the dust and waxy layer left during the Bodhi production process, and at the same time play a rough and shallow polishing role.

After that, use a delicate soft cloth or gloves and a base cover to further play with Bodhi for about half a month, and rub and polish the Bodhi more softly, positively and more meticulously. Be careful not to play violently throughout the process.

In fact, at this point, we should set aside a week or so for Bodhi to dry naturally. The purpose of leaving a period for Bodhi is to allow Bodhi to be in full contact with the air, so that the oil secreted by it can better form an oxide layer, which is a necessary process for the emergence of slurry, and at the same time, it can better protect Bodhi itself and make it better adapt to the environment.

At this point, the Bodhi bracelet began to form a pulp, and we were finally able to play with Bodhi directly with both hands and take it out. In fact, we just need to keep our hands clean and often use it to play with the rubbing plate.

Pay attention to the game should be as even as possible when playing, and the places that are not easy to play should also be taken care of.

After playing for more than ten days, Bodhi began to appear a thin layer of pulp, we have to give it a certain amount of time to rest again, this time the placement time can be longer, about half a month. After that, it is enough to keep repeating the process of playing and placing the game.

1. Rub the surface of the beads vigorously with a bath towel. The effect is actually to clean the surface of the beads from the adhesive layer and dirty color and perform fine polishing, 2-3 days, about 2-3 hours a day.

2. Place naturally in a cool place for a week. Allow the beads to dry naturally, while the surface is evenly in contact with the air to form a fine and uniform oxide protective layer.

3. Hand pan (hands must have just been washed and dried), pay attention not to miss around the orifice. You can plate for about 30 minutes a day.

4. Let it be left for a period of time before natural drying. Let the slurry harden to a certain extent, usually about a week.

5. Repeat the process of 4 and 5 5-6 times, that is, 3 months, and it will be bright.

Here's how the bracelet gets brighter and brighter:1. Avoid playing with sweaty handpans. Probably many people play Bodhi before playing wooden bracelets.

There are a lot of bracelets, and I thought that sweaty hands were also very suitable for wooden bracelets, but I stepped on a minefield. Friends who often play wooden bracelets will know that dry hands are the artifact of wooden bracelets, and only dry hands will speed up the formation of wooden bracelet pulp. Because when the sweaty hand plays with the bracelet, the bracelet will be swollen due to moisture due to moisture, and after drying, the texture of the wood will become larger, and even cracking.

2. Avoid contact with grease. The wood used to make bracelets contains a certain amount of oil in the wood, so there is no need to rub grease on various parts of the body. When playing with wooden bracelets, try not to touch oils, solvents and chemicals to avoid irreversible effects on the bracelets.

There are some materials of bracelets that need to be played with oil and paste, which can speed up the formation of its pulp.

3. Avoid vigorous rubbing. Some friends will use the method of playing with diamond walnuts to play with wooden bracelets, thinking that vigorous can work miracles, and even use a bath towel to rub it. In fact, the more the wooden bracelet rubs its surface, the rougher it will be, which will make the brown eyes more obvious, and can not speed up the formation of pulp.

Generally, when the bracelet is new to hand, you can consider taking a moment to plate it and give the bracelet a layer of natural pulp, which is oxidized, which is good-looking, and second, it is also a kind of protection for the opponent's string.

The simple point is to gently rub the beads with gauze gloves or cotton cloth every day, about a few minutes, and then put it in a sealed bag, the whole cycle is 1 to 2 months, so that the surface layer is slowly oxidized in contact with the air.

Do not touch with sweaty hands when discing, it is impossible not to get on (red) hands, 1 month later, the pulp will be formed, then you can wear it, and the daily waterproof, oil-proof and anti-collision will be.

The bracelet is getting brighter and brighter, and it must be insisted on for a long time.

Disc play let ** constantly polish and polish the opponent string.

**The secreted oil can also nourish the bracelet.

The bracelet will become smoother and more delicate.

From the insistence on playing, regular cleaning, avoiding chemical ingredients, insisting on grinding, putting mainly and other aspects to plate beads bracelet brighter.

1. Insist on playing: To make the bracelet brighter and brighter, you need to insist on playing, insisting on playing the bracelet can make the bracelet continue to polish and polish, and the secreted oil can also nourish the bracelet, and the bracelet will become more and more smooth, delicate and shiny.

2. Regular cleaning: In addition, to make the bracelet brighter and brighter, it is also necessary to clean it regularly, after the bracelet is worn or placed for a long time, the surface will gradually adhere to a large amount of dust and dirt, and regular cleaning will help to maintain the clean and bright appearance of the bracelet.

3. Avoid chemical components: When wearing bracelets, it is recommended to avoid contact between bracelets and cosmetics, perfumes, shower gels and other supplies, which contain certain chemical components, and chemical components will cause corrosion on the surface of the bracelet, and the color of the bracelet will be affected.

4. Insist on grinding: Many bracelets are very clean, but the discoloration is very slow, and there is even no room for discoloration. Such as Xingyue, Coconut Tin, Cook, etc., we play more in pursuit of a hanging porcelain.

The simplest way to achieve the so-called hanging porcelain is actually polishing. This kind of skewer is suitable for playing with hands, and there is no need to fall and gloves, and the human hand is equivalent to 5,000 mesh sandpaper, slowly grinding, slowly polishing.

5. Put it mainly: The wooden skewers are more squeamish, and you play too long every day. If you care too much about it, it will easily turn black.

For most wooden skewers, it is necessary to divide the skewers into three points and put them in seven points in the early stage, until the slurry layer appears on the surface of the skewers. Coiled wooden skewers, you have to be ruthless, force yourself not to care, it's always good to put it for a while.