How can the small leaf red sandalwood bracelet be coiled out of the glass bottom?

All wooden bracelets, if you want to plate out the perfect glass bottom, the most important one is not to be in a hurry to wear it on your wrist, don't wear it in summer, you must use gloves to plate, slide the plate astringently, and put less plate and more in the later stage! I have a yellow pear and a small leaf red sandalwood bracelet, I have been on the plate for six years, I have never worn it, it has long been out of the glass bottom, and it feels warm!

The strings of the new red sandalwood need to be stuffed in the sealed bag for more than half a year, because the pterosandrin will be blackened by accumulation and oxidation, and the surface will be completely stable after half a year.

It is easiest to get out of the glass bottom directly, but you should also pay attention to the interval between the plate and the cycle, and the specific plate for a few days depends on the quality of the bracelet.

1: First use a bath towel to remove the surface wax skin for about a week, and then put it for a week.

2: Put it for two weeks when you use cotton gloves to plate out the thin skin pulp and see that the surface of the beads is sticky.

3: After two weeks, put it in the refrigerator for three hours, take it out and leave it at room temperature.

4: Put it in a plate play bag made of fine mulberry silk cloth for 30 minutes, once a day is enough! Note:

I am using my mother's wedding dress, the Qing Dynasty old mulberry silk quilt fabric made of the plate play bag) remember not to use imitation mulberry silk will hurt the beads, you must be willing to spend money to buy good real mulberry silk fabric, is to make cheongsam and Tang costume fabrics.

Playing small leaf red sandalwood bracelets does not exist, small leaf red sandalwood bracelets take time to play, it is recommended to take a look at the Chinese home ** above to learn to learn the knowledge of hand string plate play.

Don't get started, don't touch grease and water, use a thick cotton cloth, play gently and slowly, you can see the effect in about 15 days, and there is a small slurry. That is, the glass bottom you said, insist on 1-2 months, and after the pulp is plump, you can wear it.

Playing beads is not scientific research, there is no strict time, casual, there is no strict time limit on the placement and play time, according to the bead material to choose different placement time, some friends have placed it for a year, take it out and take it out a little bit on the luster like jade.

During the process of the plate, you will caress it with your hands, trying to take care of every corner, and rub it repeatedly until you have a satisfactory effect. After the color becomes darker, you can gradually use the cloth, after all, the bracelet is in direct contact.

There is a way, the average person can't stick to it, before getting started, rub it with a bath towel for a week, and then cotton glove plate, plate for 3-5 days, place it for 2 days, so cycled, it must be a glass bottom.

Plate seven put seven, is a more general method, is for friends who do not have so much energy, that is, plate seven days put seven days, half an hour to 1 hour a day, simple and easy to remember.

We must have a good attitude, not in a hurry, and realize that this is a long-term process, everything in the world is like this, the more perfect things are, the more energy and dedication are needed, so we must have this mental preparation in the early stage.

Because the small-leaved red sandalwood will also form pulp due to its own oil and oxidation, but the natural pulping process is slower than the process of playing with pulp, and the gloss is worse.

The key is to look at the technique, with the right method can be dished out of the bottom of the glass in one night, I practiced iron sand palm when I was a teenager, so the speed is fast, hahahaha!

I'll take the most scientific, pay attention to the dehydration of the newly opened material, and then wear silk gloves to put less and more, and play no more than 5 minutes at a time, and hang evenly in the shade to avoid wind and light!

The material is very important, and I use the tumor scar material to make the finished product, which is very bright and has a glass-like luster.

First of all, you buy a small leaf red sandalwood bracelet, and then you can plate, remember, wear gloves!

Don't wear it, just wear gloves every few days, and the most important thing is to offer three sticks of incense every day!

Rosewood: black plate, bright release, clean hand plate, and then insist on it for a long time, just do it.

The main thing is to see whether the quality of the small leaf red sandalwood is good or not, and the good ones can be.

I don't know how to disk, it's been black in a few years, but it's still bright.

Glass bottom, mud, sweaty hands, gloves.

Old iron, take a look at whether this is a small leaf?

<> see if I'm making a mistake.

It's been going on for more than a year and it's still not lit.

Small leaf red sandalwood small bracelet, how to play and specific steps:

1. Before the red sandalwood Buddha beads, the beads should be oil-free and wax-free. If you want the small leaf red sandalwood bracelet can be a good effect in the future, you should ask the merchant to give you the small leaf red sandalwood beads that are not waxed and oiled at the beginning of the requisition, if the red sandalwood beads have been waxed or oiled, you should first remove the oil wax and then come to the plate.

2. Carefully rub with pan gloves to clean the dirty color on the surface of the beads and re-polish. About 2-3 hours per day.

3. Rub the small leaf red sandalwood bracelet with gloves for a week, then there will be red traces on the surface of the soft cloth, which is normal, and the color will fade after a week. How to play with the small leaf red sandalwood bracelet.

4. Start the handpan. Your hands must have just been washed and dried. Please do not plate directly with sweaty hands, it is best to wear cotton gloves, and pay attention to the orifice around the beads of the small leaf red sandalwood bracelet must be coiled.

You can plate for about 30 minutes a day, and after a week to two weeks, you can feel the rough feeling of hanging and hanging when you plate the beads, but in fact, the beads have formed a thin layer of pulp at this time.

5. At this time, it can be left for a period of time, and then dried naturally, so that the slurry can be hardened to a certain extent. Usually it is about a week.

6. After about 3 months or so, you will see that the beads of the small leaf red sandalwood bracelet show a very aura luster. The good beads of the disc sometimes show strong reflections, some like a glass luster. How to play with the small leaf red sandalwood bracelet.

7. Special attention should be paid to the fact that the beads should not be exposed to large moisture at any time. If the beads are dirty, you can wipe them several times with a slightly damp cotton cloth and then leave them for a while before playing with them.

When the small leaf red sandalwood bracelet is coiled, all the areas of the beads are as far as possible, especially the orifice, the most taboo of the beads is to be quick success, and can only slowly come from a process by process, and with the change of the beads, you can also get a kind of spiritual pleasure. Cite.

Wen play: How to make small leaf red sandalwood for novices? Teach you a few tricks, the bracelet is so accurate!

If you want to make a glass bottom slurry, you need to master the playing time.

That is, people who know how to put seven on the seven, this is a more general method, mainly for friends who do not have so much energy, that is, the plate is seven days for seven days, half an hour to 1 hour a day, simple and easy to remember.

Playing beads is not a scientific research, there is no strict time, do it casually, there is no strict time limit on the placement and play time, choose different placement times according to the bead material, some people have placed it for a year, take it out and take it out for a while, and it will be as lustrous as jade. Because the small-leaved red sandalwood will also form slurry by the oil and oxidation of the cracked rock itself, but the natural slurry process is slower than the process of playing with slurry, and the gloss is worse.

How to identify the *** of the small-leaved red sandalwood

1. Look at fluorescence: Rosewood with good wood and good oiliness is a permeable fluorescence formed on the surface after polishing and processing. And it won't disappear because of the game.

This kind of wood, after 12 hours of water, such as in the evening and in the morning, there is a blue fluorescence in the water.

2. Listen to the sound: The small leaf red sandalwood is high-density, so when it hits, there is a crisp sound and will not be dull and heavy. Cotton and cotton hit, glass and glass hit, the sound is different.

The reason is that the density is different, so the frequency of vibration after hitting Jian Zen is also different. So, the audio is also different.

3. Look at the oiliness: the small leaf red sandalwood with good oiliness is easy to plate out a good pulp. When we talk about oiliness, we are actually talking about pulp.

It is the oxide layer formed by the beads through the disc play. The oiliness will follow the wooden duct and seep out of the brown eye. If you put it overnight or a few days before taking it out, you will have a blocking sensation as soon as you get started.

Oiliness is reflected by the feel, but also by the color.

Before playing with small leaf red sandalwood, you need to place it for half a year to a year, wrap the plate with gloves when playing, and follow the principle of putting seven on the plate, and the beads will be as shiny as jade. If you want the small leaf red sandalwood to come out of the glass bottom, you should pay attention to maintenance, do not touch the water, and store it in a cool and dry closed environment. 1. Place it for a period of time before placing it to play with the small-leaved red sandalwood, place it in a dark place that is not cool for half a year to a year, and wait for the oxidation effect that can be seen directly on the surface of the small-leaved red sandalwood, and then play with the plate.

2. Put a layer of plastic bag in the gloves to avoid hand sweat staining the bracelet. When playing, follow the principle of playing seven and seven in one, seven days, one hour a day. Leave it for another seven days, and after a while, the beads will be shiny like jade.

3. Pay attention to the maintenance bracelet after playing with the maintenance plate, and do not let the small leaf red sandalwood get wet. It is best not to wear it when there is sweat on your hands, usually wipe the surface with a clean cloth, seal it when saving, and avoid a humid environment. For more information about how to plate out the glass bottom of the small leaf red sandalwood, enter to see more content.

What does the small-leaved red sandalwood bracelet look like, the current market is not a kind of wood, it is a common name for a variety of woods, so.

It is not the same to take the real small-leaved red sandalwood, the scientific name of the wood, sandalwood and red sandalwood, the real small-leaved red sandalwood, there are very few on the market, and the ** is also very high.

Real small-leaved red sandalwood, sandalwood red sandalwood bracelet is as follows.

<> Indian red sandalwood market, it is called Indian small-leaved red sandalwood

<> Zambian red sandalwood is also called blood sandalwood.

<> African red sandalwood is called African small-leaved red sandalwood.

<> the latter three are common on the market, and there are other woods such as small-leaved red sandalwood are not listed, because they have not been in the market for a long time.

Do not get any oil, including oil on your hands, face, or oil. People who sweat easily should wear gloves and do not use sweaty hands to directly coil the beads. It cannot be wet, let alone washed; When the humidity is particularly high, it is not advisable to coil the beads.

After using the handpan, it cannot be put down casually, and it needs to be wiped with a muslin cloth.

Extended information] First, basically the wood friends who coiled the beads into black briquettes were because they did not do the above points. Some of them are dipped in water and "rub their hair" with the beads, which become dull and dull. Some not only from the beginning of the handpan, even for the sake of a moment of oil, deliberately rubbed oil on the face with beads, after a period of time, the beads wrapped in a thick layer of oil sludge, but also thought that they were dished out of the "pulp", and after a period of time found that the beads completely turned into briquettes!

2. Remind again: all wooden bracelets must remember to avoid oil and water! But if it really comes to this point, in fact, there is no need to be discouraged, there is still a solution, and it can be saved by the following methods.

The first way is to continue to play, but in the right way, with gloves, you can click hard, persevere, play with the dirty things on the surface of the bracelet, after a long time, the beads will become shiny.

Third, it is to use a bath towel plate that has misled many people. In the small leaf red sandalwood plate playing method circulating on the Internet, many versions mention that "you should first wipe off the dirty substances and wax layers on the surface of the beads, and use a bath towel to rub it, about two or three hours a day, and insist on it for two days."

Fourth, I don't know who wrote this method under what circumstances, and it is likely to be copied from the game of Bodhi. Now what will be dirty on the surface of the small leaf red sandalwood when it leaves the factory? Although there will be bad merchants who wax, the slightly oily small leaf red sandalwood with high-mesh sandpaper polishes the luster is much better than waxing, so why bother painting snakes.

Although it is common sense, this method is very widely circulated on the Internet and does mislead many people. If you really rub it with a bath towel, the beads with a slightly higher number of polishing mesh will definitely be scratched off, which is equivalent to reducing the number of polishing meshes and going back.

Fifth, it is not recommended to use a bath towel for new beads, but when the beads are made into black briquettes, and the surface is indeed dirty with black oil sludge, it is a good way to rub the bath towel at this time, which is equivalent to returning to the furnace and rebuilding again, and then using a cotton cloth to carefully dish.

Sixth, another method is to use sandpaper to polish the hand string through the body, that is, to grind off the surface of a layer, so that it can be reborn, and then start from scratch, with the right way to play on it, the above is in case the red sandalwood beads become black after the method, it is best to use the following method from the beginning of the correct plate play.

In the comparison chart of the last two before and after the end of the game, you will know the difference between playing after the end of the game and not playing at the end of the game.

The above is not very finished**.

The second ** is after the plate has a beautiful luster**, which is the effect of playing out the pulp.

Playing small leaf red sandalwood bracelets, do not rush for quick success, should use the way of the plate, that is, a gentle plate play. Because of the beautiful and beautiful luster, the pulp is constantly accumulated, slow work produces fine work, and the effect is better. At the same time, it is necessary to do a good job of waterproofing, direct sunlight, and keeping away from organic solvents such as alcohol.

The picture below is the picture after the market is finished.