Why does my mouse keep running? It didn t take long to run to the top 5 of the screen

I know this question, I didn't know if it was the same as yours before. It could be a problem with the mouse pad, you try it by placing the mouse directly on the table. Some products are made entirely of raw rubber and are thinner, making it easy to bend permanently in use.

There is a noteworthy problem for optical mouse users, because the optical mouse relies on reflected infrared rays for positioning, and the red surface has a weak ability to reflect infrared rays, and the optical mouse will become insensitive, that is, try not to choose the red mouse pad.

It is a problem with a mouse or a thing with high magnetism near a mouse.

In many ways, the optical mouse needs to use a special mouse pad, and put your speaker away from the mouse. If it still doesn't work, then it's the problem of the mouse itself? Should it be repaired?

In this case, the scope of the desktop operated by the mouse is generally uneven, so choose a flat desktop, or wipe it. If it is a light mouse, just see if there is a reflection on the desktop, such as a material similar to glass, change to a non-reflective one, if it can't be solved, it is generally a small problem with the hardware, although the impact is not great, but it just feels uncomfortable, so replace it during the warranty period!

Don't use it on a very smooth desktop or glass, a book under the mouse will do the trick

There is a high probability that this mouse will be broken.

It may be that the mouse is broken, so try again and the mouse.

A whole person software is installed, you press ctry+del+alt, in the task manager, select the program, and end the task

You turn the mouse upside down and put the contact surface upside down.

If you still run, it's broken.

Because it didn't come into contact with anything.

If it's broken, go buy a Microsoft one, it's very easy to use, and the price is not too expensive.

Here's how to <> the mouse always running to the top left corner:

1. First of all, check the mouse and mouse pad, whether the mouse pad is too reflective or has obvious wear, if it is a problem with the mouse pad, replace it with a dark cloth mouse pad;

2. Then, on the system desktop, select Start, click Control Panel, open System, select Hardware, and open Device Manager;

3. In the Device Manager dialog box, find the PS option in the mouse and other pointing devices, and double-click this option;

4. In the dialog box that appears, select the Advanced Settings tab, then remove the checkmark in front of Quick Initialization, and restart the computer;

5. Open the control panel, find the mouse, and double-click to open the mouse properties panel.

Here's how to <> the mouse always running to the top left corner:

1. First of all, check the mouse and mouse pad, whether the mouse pad is too reflective or has obvious wear, if it is a problem with the mouse pad, replace it with a mouse pad made of dark cloth of Yuanhong;

2. Then, on the system desktop, select Start, click on the control panel, open the system, select the hard hail bend, and open the device manager;

3. In the Device Manager dialog box, find the PS option in the mouse and other pointing devices, and double-click this option;

4. In the dialog box that appears, select the Advanced Settings tab, then remove the checkmark in front of Quick Initialization, and restart the computer;

5. Open the control panel, find the mouse, and double-click to open the mouse properties panel.

The computer mouse suddenly ran to the upper left corner, pulled down and ran up, it is not clear that there is a problem, the following is the solution that I introduce to you that the mouse runs to the upper left corner of the desktop, welcome to read.

Check to see if there is a problem with the mouse and the mouse pad itself. As shown below, check the yellow circle area for stolen goods, and do some cleaning. If the mouse pad is too reflective or has obvious wear, if it is a mouse pad problem, it is recommended to replace it with a dark cloth mouse pad.

If you have another normal computer, you can take the mouse and give it a try, which is the fastest way to rule out the problem of whether the mouse is a loss.

Check some of the software settings on your computer. Could it be a problem with the settings of some game software? If you switch to the desktop when you play CS online, the mouse will fly to the upper left corner at the beginning of the next game, and it will be no problem to exit CS.

On the system desktop, use the mouse to select "Start-Control Panel-System-Hardware-Device Manager".

In the Device Manager dialog box, find the "PS 2 Compatible Mouse" item in "Mouse and Other Pointer Devices" and double-click it.

In the dialog box that appears, select the "Advanced Settings" tab, and then remove the checkmark in front of "Quick Initialization".

Restart your computer, if it still doesn't work, read on.

Open the Control Panel, find Mouse, and double-click to open the Mouse Properties panel.

Click Remove before locking.

8. If it is still not solved at this point. It is recommended to repair the system and disinfect it completely! Then use the mouse to test the software before the test!

Here's how to <> the mouse always running to the top left corner:

1. First of all, check the mouse and mouse pad, whether the mouse pad is too reflective or has obvious wear, if it is a problem with the mouse pad, replace it with a mouse pad made of dark cloth of Yuanhong;

2. Then, on the system desktop, select Start, click on the control panel, open the system, select the hard hail bend, and open the device manager;

3. In the Device Manager dialog box, find the PS option in the mouse and other pointing devices, and double-click this option;

4. In the dialog box that appears, select the Advanced Settings tab, then remove the checkmark in front of Quick Initialization, and restart the computer;

5. Open the control panel, find the mouse, and double-click to open the mouse properties panel.

Here's how to <> the mouse always running to the top left corner:

1. First of all, check the mouse and mouse pad, whether the mouse pad is too reflective or has obvious wear, if it is a problem with the mouse pad, replace it with a mouse pad made of dark cloth of Yuanhong;

2. Then, on the system desktop, select Start, click on the control panel, open the system, select the hard hail bend, and open the device manager;

3. In the Device Manager dialog box, find the PS option in the mouse and other pointing devices, and double-click this option;

4. In the dialog box that appears, select the Advanced Settings tab, then remove the checkmark in front of Quick Initialization, and restart the computer;

5. Open the control panel, find the mouse, and double-click to open the mouse properties panel.

First, the mouse problem.

I've had more than one occasion with the problem of the mouse flying around automatically, and I'm sure other friends have also encountered it. Although this is a small problem, it may cause you a lot of trouble, and here I will solve this problem by combining theoretical and practical analysis.

The next thing we can talk about is the failure of the hardware. First of all, we should be familiar with the working principle of the mechanical mouse: by moving the mouse, the rubber ball is driven, and the rubber ball rolls and rubs the horizontal and vertical wheel rollers in the mouse to drive the grid wheel to rotate.

The rim of the grille wheel is grille-shaped. Immediately on both sides of the grille wheel grille, one side is an infrared light-emitting tube, and the other side is an infrared receiving assembly. The infrared receiving assembly is a three-terminal device, which comprises two infrared receiving tubes A and B.

There is a hold-down wheel in the opposite direction between the horizontal and vertical wheel angles, which keeps the ball pressed against the two wheel shafts no matter which direction it rolls.

Connect to the host computer via PS 2 port or serial port. The interface uses four wires, which are power, ground, clock, and data. When working normally, the movement of the mouse translates into the rotation of the horizontal and vertical grid wheels in different directions and speeds.

When the grid wheel rotates, the teeth of the grid wheel periodically block the infrared rays emitted by the infrared light-emitting tube to irradiate the A and B tubes in the receiving assembly, so that the output terminals of A and B output electrical pulses to the control chip in the mouse. Because the two tubes of A and B are arranged vertically in the infrared receiving assembly, the moving direction of the part of the grille teeth clamped in the middle of the infrared emission and reception is up and down, and the angle between the receiving tube of A and B and the infrared emitting tube is not zero, so the electrical pulse output by the A and B tubes has a phase difference. The control chip in the mouse determines the rotation direction of the horizontal or vertical grid wheel through the phase difference of this pulse, judges the rotation speed of the grid wheel through the frequency of this pulse, and continuously transmits the mouse movement information to the host through the data line, and the host makes the cursor on the screen move synchronously with the mouse through processing.

When the computer starts, Windows initializes the mouse through the interface. If one of the cables is broken, the host will give you the message that the mouse is not installed, so please shut down and install the mouse. If the mouse connector is unplugged in use or the mouse cable is in poor contact, the mouse system is paralyzed.

Knowing the basic working principle of the mouse, let's take a look at why the mouse pointer will fly on the screen:

How does the mouse work? Why did the pointer on the screen just follow?

How does the mouse work? Why did the pointer on the screen just follow?