Only the logo of vivo is displayed on the screen, and the phone cannot be turned on

Hello! I'm sorry for the inconvenience, according to your description, you can try to connect the phone to the charger to charge for half an hour, and then try to press and hold the power button of the phone for 10 seconds to force restart the phone, if the phone still can't turn on normally, you can press and hold the power button and the volume up button at the same time, wait for the word vivo to appear on the phone, let go of the power button, continue to press and hold the volume up button until the robot interface appears, select wipe data factory reset and then press the power button, and wait for the interface to jump, Then select Reboot

System Now Just restart your phone. Doing this will result in the loss of all the data on your phone (TF card.

except for the data on it), including installed applications.

The boot stops at the vivo interface, which can be handled as follows:

1. Try to force restart the phone to observe whether it is restored, and check whether the power button and volume button are stuck by the protective case.

Force restart method: Press and hold at the same time"Power button"+"Volume down key"More than 10 seconds.

2. Repair the system.

Enter"System Repair Mode", and then tap"Install the system software"Enter"Networking updates to the latest version", click"OK"(It is recommended to connect the charger) - Connect to the available wifi, when the upgrade package is detected, tap"** and install"Update your phone's system.

To enter the system repair mode, press the shutdown state"Power button"with"Volume up key"Enter fastboot mode, then select recovery mode through the menu, select: install system software, and then select: update the latest version online;

3. Clear phone data, enter recovery mode - clear data - erase all data.

To enter recovery mode, press the shutdown state"Power button"with"Volume up key"Enter fastboot mode, and then select recovery mode through the menu; (Note: This will erase all data from your phone.) ）

4. If the above methods fail to solve your problem, please back up your mobile phone data in advance, and bring your mobile phone and purchase voucher to vivo customer service center for testing.

The phone only appears The logo pattern and the application inside cannot be opened because the phone's system is malfunctioning, and you can solve the problem by restoring the phone's factory settings and restarting the phone.

It is very likely that the system is broken, the system crashes, and now in this case, you can press the hard bar button, long press the power off button, and the volume button. And that information is good, if it doesn't work, you can flash it on the Internet. It's okay to flash the machine, but the flashing machine is risky, and it's okay to resume it after flashing it?

If it really doesn't work, go to the after-sales service to check if it is a hardware problem? If the software problems can be solved.

The vivo phone can't be turned on, but the screen keeps on the Weibo logo, what's going on? Because this is the chaos of his internal program, as long as he adjusts it to the normal use method, it will slowly work normally, and there is no need to convert it to anything else.

It should be a crash, you long press the power on and off button and the volume down button together to see if it can be restarted.

First of all, you must confirm the reason why the phone can't turn on, and if you really don't know the reason, you can try the following methods:

<>1: Press the power button to force a restart.

2: After charging the phone for 20 minutes, press the Qingyuan button again.

3: Press the volume up button at the same time when the phone is turned off for a few seconds and wait for the vivo logo to appear, let go of the button, enter recovery mode, first select Wipe Data Factory Reset, select Wipe Cache Partition after completing the interface jump, and select Reboot System Now to recheck the bridge immediately after completing the phone (use this method with caution to avoid losing all the data on the phone.) ）。

You can try to force restart your phone, how to restart your phone:

1. Press and hold the power button to pop up the "Re-examination and Repentance" option to turn it off;

2. Slide down at the top of the screen to bring up the shortcut details page twice Swipe up at the bottom of the screen to enter the control center, and click the "Shutdown and Restart" switch;

3. Force restart the phone; (It is recommended to use FunTouch OS when your phone freezes or gets stuck).

and the models of subsequent systems: press and hold the "power button" + "volume reduction button" for 10 seconds at the same time;

Press and hold the top round button for more than 10 seconds to force restart the phone (applicable to NEX 3 NEX 3S);

FunTouch OS previous models: Press and hold the "Power Button" for more than 12 seconds;

If you still can't turn it on, you can bring your mobile phone and ID card.

A valid purchase voucher should be processed by the service center, enter the browser and search for vivo official website - service - service center - view all - select the province and city to query the address of the local service center and the way to contact the difference.

Summary. Hello dear, it's a pleasure to serve you. The vivo phone can't be turned on, but the screen keeps lighting up with the vivo logo 1This is called a card logo in the maintenance industry. It is usually caused by system problems or hardware problems.

The vivo phone can't be turned on, but the screen keeps the vivo logo on, what's going on?

Hello dear, it's a pleasure to serve you. If the vivo phone can't be turned on, the bridge machine will be covered, but the screen will always be lit with the vivo logo 1This is called a card logo in the maintenance industry. It is generally caused by system problems or hard problems.

2.Please be patient. If you wait for more than two hours and cannot enter the system, it is caused by the following two situations.

Scenario 1: Caused by system damage. Please take your phone to the vivo after-sales repair center. Just flash it.

The second case: caused by hardware leakage problems. Generally, it is a CPU problem or a font problem. In this case, it is necessary to inspect the main defense brigade calling board and carry out Kai maintenance.

If the phone does not turn on, you can troubleshoot it by the following methods:

Try force restarting your phone to see if it resumes to work, and check if the power and volume buttons are stuck in the case.

Force Restart Method:

Models listed before September (models before X20): Press and hold the "power button" for 12 seconds or more.

Models released after September and new models (X20 and later): Press and hold the "Power Button" + "Volume Down Button" at the same time for more than 10 seconds.

3. NEX 3 NEX 3S: Press and hold the top round button for more than 10 seconds.

If the above methods still can't be turned on after operation, you can bring your mobile phone and valid purchase voucher to the service center for testing and processing, enter the browser - vivo official website - three bars in the upper left corner - service - service center - select the current province to check the city, and contact before going to ensure that there is a staff to receive you and then go over.