About the maintenance of basketball shoes, how to maintain basketball shoes How to maintain basketba

Go to the place where the shoes are repaired, they have a cleaning agent there to recover.

After choosing a suitable pair of sports shoes, you must want to know how to protect and extend their service life, the following points may be helpful to you: 1. Athletes who train every day should prepare more than two pairs of sports shoes so that they can be replaced every day. 2. Before wearing the shoes, it is best to place them in a ventilated place for a day so that the shoes have enough time to dry.

3. Athletes or sports enthusiasts should always wear the sports shoes they purchased. To prolong the life of your shoes, wash them as little as possible. 4. The nylon mesh cloth and artificial tanning skin on running shoes are relatively easy to maintain, and can be washed by hand with water, and it is best not to use a washing machine or soak in water.

Washing and drying procedures for sports shoes: 1. Wash the shoes and laces separately with neutral soap powder. When washing shoes, remove the insole, gently scrub with a soft-bristled brush, and rinse again.

2. Dry the insole with the toes facing down in a ventilated place. 3. When the shoes are cool and dry, the use of shoe supports will help the shoes to return to their original shape; Or stuff the newspaper in your shoes. Newspapers have the effect of killing two birds with one stone, not only helping to restore their original shape, but also quickly absorbing moisture from their shoes.

4. Dry the toe with the toe toe facing down and the sole facing the wall in a ventilated place at room temperature, which can prevent water from soaking into the midsole foam material. (Because the foam material does not dry easily, it is recommended not to lay wet shoes flat.) 5. Take out the newspaper after the shoes are dry, and let the shoes dry for a while.

6. Excessive direct sunlight, heat from the hair dryer and improper care methods will reduce the service life of shoes.

You can buy shoe wash or shoe polish to try. I had a similar situation and was noticeably better after wiping.

1. Basketball shoes should be placed in a dry and ventilated place to avoid direct sunlight, because the humid environment will cause the corrosion of the basketball shoe body, and the exposure to sunlight will cause some materials of basketball shoes to deteriorate and discolor. However, the place where the basketball shoes are placed should not be too dry, as it will cause cracks in the leather. Because the humid environment will cause the decay of the basketball shoe body, the exposure to sunlight will cause some of the materials of the basketball shoe to deteriorate and discolor.

2. When preserving basketball shoes, you should stuff a soft paper ball inside the basketball shoes, the main purpose of which is that the paper ball can absorb the residual moisture inside the basketball shoes to keep the inside dry, and it is conducive to maintaining the fixation of the basketball shoe shape, so as not to "collapse" after use.

3. In particular, it is necessary to buy some shrink film for the preservation of the collection type, and completely wrap a pair of basketball shoes like the inside of a basketball shoe store, so as to isolate the basketball shoes from the air to the maximum extent and prevent the continuous oxidation of the basketball shoes by the air for a long period of time. For example, the outsole of a visible cushion such as Max Air or Jordan Gen 11 and Gen 16 will slowly turn yellow over a period of several years, and it is a good idea to use shrink film to maintain the original color.

1 Avoid using sneakers under abnormal conditions, that is, do not use them on rainy, snowy, and sun-exposed asphalt courts (commonly known as outfields) and road surfaces.

2 When normal wear and tear is unavoidable, increase the frequency of changing shoes (not to buy more shoes, but to alternate them every day) so that the shoes have a "buffer period" to maintain the best condition and longest life before the next use.

3 If the shoe is dirty, clean it immediately to avoid oil stains, water droplets and the upper deterioration caused by the reaction of the upper material.

4 For sneakers equipped with external air cushions, be sure not to use them in an excessively cold environment to prevent the air cushion from bursting (the critical operating temperature of the airbag is about -15 degrees Celsius).

5 Be sure to use durable sneakers when playing on the outfield, and know that some sneakers are specially used on the sole of the floor.

Cleanup: Sneakers are made of more complex materials, from traditional leather, fabric, and nylon to avant-garde non-marking rubber, PU, and TPU materials. Therefore, it is more troublesome to clean up than leather shoes and other shoes.

In terms of cleaning, different methods should be used for different materials:

1 Outsole and non-nylon side part: spray a little collar net, wipe gently with a toothbrush after 15 seconds, not too long (to avoid reaction and reduce the possibility of corrosion), and then immediately rinse off the foam with warm water and wipe it clean with a soft cloth to prevent some special glue from opening when exposed to water. If possible, use a toothpick (head to be smoothed) to remove any pebbles trapped in the sole pattern to prevent the outsole from deforming due to wear and tear (braking will be greatly affected, especially when playing on the court outside of our school).

2 Upper: The upper is more complicated, and the principle is to understand the material that makes up the upper. The most basic thing is to scrub with a damp cloth in water and dry it quickly (never use a hair dryer!).

Scratch marks and cracks must be avoided, otherwise it will cause more damage (cracks become larger).

3 Some special uppers: some uppers (or other shoes with PU material as uppers) and patent leather uppers are very simple, and a pack of napkins can be sent after lunch. If it's suede, pay attention to how soft and moist the cloth is, as it will make it more difficult to remove the stain if it is too wet.

The cleaning of the baby goatskin is the most troublesome, and there is no water at all (you can sign your name on it with your right hand dipped in water, and it is no problem to leave it for two or three months).