Many people often step on the accelerator when driving, is it because of fuel economy or poor techno

When many friends sit in the car, they will find that many drivers have the driving habit of stepping on the accelerator and loosening the accelerator when driving, which makes many novice friends feel very strange. Therefore, the question arises in my mind: when they drive the accelerator and loosen it, is it because of bad technology or to save fuel?

Or is there something that newbies don't know? Today, Wheelya will analyze why they did this?

It is very likely that the driver has just gotten his driver's license, so he has a bad grasp of the accelerator of the car, and the control is not very stable, and he will often release the accelerator after a while.

Because the novice lacks the ability to judge, he has no bottom in his heart, he doesn't know the speed in front of him, and he doesn't dare to accelerate a lot, so he can only rely on the situation to cooperate with the throttle. Therefore, when driving, the accelerator is often stepped on and released.

In addition, many friends may have stepped on the accelerator and loosened the accelerator when they first started driving, and over time they developed such a habit, and then they couldn't change it like this.

In addition, it may not be that the driver is not good at driving, but to save fuel.

The reason why these drivers step on the accelerator and loosen the accelerator is mainly to use the inertia of the vehicle to make the vehicle drive forward, which can indeed play a role in fuel saving. However, this kind of operation is limited by the traffic environment and driving comfort, so it is generally only suitable for some places where the road is relatively smooth, and the common one is to run at high speed.

It is completely unnecessary when in the urban area, generally do this to step on the accelerator for a few seconds before you start to step on it again, the interval between the time is very short, so this is not fuel-efficient, it is better to save fuel at a stable speed, this way will have a good effect on the high-speed, the speed on the high-speed is very fast, generally drive to 120 when you release the throttle can also slide a long distance.

It's like skateboarding in a crowded place compared to skateboarding on a flat road where there aren't many people. The reason is also very easy to understand, in a crowded place, you just pedaled a few times, ready to stand up and let it run on its own, and the result is a person, then you have to quickly step on the brakes. And you can run a long distance on a flat road with no people, with a pedal.

Sometimes it's just that some people drive in order to show off their skills.

I think it's a technical issue, because often stepping on the throttle doesn't save fuel.

Why do many people often step on the accelerator when driving? Is it to save fuel or is the technology bad?

Many friends who have bought a car, in order to save fuel, can be described in one word, that is, "do everything". One of the things that makes many people stupid and can't tell the difference, that is, when you step on the accelerator when you drive, is it bad technology, or can it really save fuel?

Stepping on the accelerator too often is very damaging to the car and will not save fuel.

I think it's a kind of experience of the different power aspects of the throttle.

Many people may do this to save fuel, after all, the price of oil in China is also very expensive.

This is done in order to save a certain amount of oil, for the sake of life.

This should be a normal way to drive. After all, you always have to release the accelerator when you step on the brakes.

I think it might be a technical problem with them, so it doesn't save much fuel.

I think it's to save fuel, but it doesn't really save a lot of oil.

The fuel-saving principle is mainly to use the inertia of the vehicle to drive the vehicle forward, which can really play a role in fuel saving. But this kind of operation is limited by the traffic environment and driving comfort, generally only suitable for some places where the road is relatively flat, the most common is to run at high speed, so this method can indeed achieve the effect of fuel saving on the highway, but it is not necessary in the area of urban traffic congestion.

1.The reason why these drivers step on the accelerator and release it is mainly because they use the inertia of the vehicle to drive the vehicle forward, which can indeed save fuel. However, this kind of operation is limited by the traffic environment and driving comfort, and is generally only suitable for some places where the road is flatter than Yousui, and high-speed driving is more common.

It is not necessary at all in the urban area. It usually takes a few seconds before you press the throttle, and the interval is very short. Therefore, it is better to save fuel at a steady speed than to save fuel in this way.

This method will work well at high speeds, and the speed at high speeds is fast. Generally, drive to 120, release the throttle and slide a long distance.

2.In fact, some people are used to stepping and loosening, not for fuel saving, but for poor technique. Some people rushed up and suddenly saw someone in front of them, so they had to step on the brakes to slow down the car.

Generally speaking, don't drive faster than 50 yards in urban areas, because there are many people in urban areas. Do not drive more than 120 yards on the high-speed Wildtown Highway because of the steering wheel.

will drift too fast. Generally speaking, fuel saving is really not necessary, as long as the fuel consumption of the car is not high in normal use. When coasting downhill, the trip computer will reduce the amount of fuel injected into the engine, or even cut off the fuel directly, which will save even more fuel.

3.Try not to open the windows, there is already a lot of driving resistance caused by the air flow during the honking on the highway. If you open the window again, it will increase the air resistance.

Not only will it make the body unstable, but it will also make the car more fuel-efficient and maintain tire pressure.

Sufficiency, reducing the rolling resistance of the tire and the ground friction can also achieve the purpose of fuel saving. The above is the answer to the question of whether one step on the accelerator can really save fuel.

Yes, a step on a loose This is the use of the inertia of the vehicle to let him move forward autonomously, can play a certain role in fuel-saving air block, but this is a certain restriction on the traffic environment and comfort, Shen Tan is only able to be less vehicles on the ground wide and flat place.

In fact, one step on the throttle and one release can save fuel, because this is the principle of inertia used to start.

It can save fuel because it mainly uses the inertia of the vehicle to drive the vehicle forward and play a role in fuel saving.

This does not save fuel, not only will it make the car unstable, but also will be particularly fuel-intensive.

Cars are relatively common in life, but many people will have a loose accelerator when driving, which mainly reflects the driver's poor skills, because only novices will do this, and old drivers will not have this kind of low-level mistakes. <>

First, the technology is not good

First of all, we must know that many novice drivers are unpredictable when they are on the road, and they are afraid that the distance from the car in front is too close, so there will be a situation of stepping on and loosening, which is a problem that novices must have, and it is also a problem that everyone will make, and many people will also have such a situation when they drive themselves, as long as they have a certain relationship with their driving habits, many car owners think that this is nothing, but it has a great impact on other passengers in the car, Therefore, if you sit in such a car for a long time, you will get motion sickness or want to vomit. In addition, it is fuel-efficient, in fact, this kind of driving can not save fuel, because the speed of the middle interval is very short, it may be a few seconds, so it can save fuel by taking a pedaling and loosening on the highway. <>

Second, the habitual illness of novice drivers

In addition, every novice driver will have such a situation, so when you encounter this situation, you should not laugh, after a period of time, you will be able to apply it well, so after getting the driver's license, you must practice the driving skills before going on the road, which is not only a responsibility for yourself, but also can reduce the occurrence of some traffic accidents, otherwise once the vehicle in front of you brakes, then it will cause your car to crash up. <>

III. Conclusion

Finally, I want to say that in the process of driving, you can refer to your vehicle speed, step on the accelerator with another foot, put one foot on the brake, and immediately step on the accelerator in case of emergency, but there is no need to step on and loosen in the process of driving, which can not save fuel, and will also bring certain problems to your travel.

It's possible that drivers with poor skills will generally drive like this, and old drivers will also drive like this, because it is more fuel-efficient to drive.

I think it's because the technology is not good, so driving is very damaging to the vehicle, and it is very fuel-intensive, and it will make the people in the car dizzy and nauseous.

I think this practice is that the driver is not skilled enough to accurately judge the road conditions.

When driving, the throttle is often loose, in fact, it is a driving habit, and there are many reasons for this habit, who can't drive, always step on the throttle and not loose. This situation generally appears in urban driving, and when the car is driving at high speed, it generally does not appear to loosen one step at a time, maintain a constant speed cruise, and the throttle generally maintains a relatively fixed stroke, so one step at a time, and the road conditions have the most important reason.

The situation on the road changes quickly, so the way we step on the gas pedal is constantly changing, if the road conditions are good, a car does not step on the gas pedal does not adjust sharply, it is okay to maintain a similar trip, or even a fixed speed cruising car does not step on the accelerator. This is mainly reflected in automatic transmissions.

There are two trigger upshift mechanisms for the automatic transmission, one is to press the throttle lightly continuously, and the other is to press the throttle and then release the throttle, which is easy to trigger the upshift. When the car is the first foot at the beginning, stepping on the weight, the system judges, the car needs more torque, speed, so it will not stop, so the engine speed is very high. Of course, some friends see high speed and high fuel consumption, and will instinctively close the throttle when the throttle.

Turn it off, and the system will decide that the car is not powerful enough.

Since there is enough power, the gearbox will be turned up at this point. The sooner you get into the upper gear, the better the fuel economy of the car will be, but the power and acceleration performance will be suppressed. So when we drive, we release the throttle and increase the transmission.

The gear, because the low gear is too easy to get up, the cost of oil is high, which is the reason why many friends who drive like to stare at fuel consumption, low gear oil change, fuel consumption increases, and the speed is fast, so quickly release the throttle, so that as soon as the throttle is released, the speed will fall down, and the fuel consumption display will also fall down quickly. So loose throttle is often a state of mind, in which it is important to save fuel and love the car.

In short, when driving, step on the accelerator and step on the accelerator, in fact, to prevent the fuel consumption from being too high. Shifting gears, increasing engine speed, showing that fuel consumption will be reduced, looks comfortable, and of course does not save much oil. Therefore, it has nothing to do with the quality of the technology, it is the driver who understands the characteristics of the car after driving for a period of time, and has the driving habit of releasing the accelerator.

I think it's probably a matter of habit for everyone, some people like it, and it's not fuel-efficient.

This is not able to save fuel, and it is easy to cause distraction on the road of driving, which is not able to drive reasonably, so it is forbidden to do so.

It can save fuel, so you want to use the inertia of the vehicle to drive the vehicle forward, and the premise that the road is smooth is to step on the accelerator and loosen it, so that it can save fuel.

Generally speaking, the speed is relatively fast when you press the accelerator, but the moment you lift your foot, the accelerator pedal will return to its original state, and the vehicle will be in a coasting state, and the speed will increase after pressing the accelerator. So let's take you to understand why some people step on the gas pedal and let go. The veteran driver said that this way of operation would make other passengers in the car feel uncomfortable, and that accelerating and decelerating might make passengers dizzy, and this driving style could not accurately grasp the speed.

But if you look closely at the buses, you will see that many bus drivers have such operations. However, one thing must be clear. There are prerequisites for this.

We have to make sure that the road ahead of the vehicle is clear. Otherwise, in the event of an emergency, the driver will not have time to react. This method has a very significant fuel saving effect on manual transmission vehicles, but it must not be used in automatic transmission vehicles.

If the automatic transmission is forced to shift into n gear while coasting, it will turn off. What's more, when the automatic gear slides, the computer will automatically control the oil volume, so as to achieve the purpose of saving fuel without manual operation. It should be reminded that if the driving speed is relatively fast, the gearbox will seriously damage the gears when changing gears quickly, and there may be a rollover phenomenon.

On the one hand, it not only fails to achieve the purpose of fuel saving, but also threatens one's own life, which is really not cost-effective.

Mainly because the engine does work when you step on the accelerator, and the speed increases, but the working efficiency of the engine is very low, the fuel injection ratio is higher, and the fuel economy is not good. If the throttle is released, the engine is idle or the fuel is off, the fuel consumption is relatively low, but we must know that energy is always conserved, but the ride is smooth. Some drivers get tired from driving at high speeds for long periods of time.

In order to rest their feet for a while, they will step on the gas pedal again and again. When the throttle is pressed, the engine speed increases to 120-130 km h. At this point, release the throttle and slide into neutral until the speed drops to about 100 km/h.

Most of these models don't have an automatic cruise function, so it's tiring to drive at high speeds.

If there is a brake in front of the car or other slow car, be sure to release the throttle to slow the vehicle down and be ready to put your foot on the brake pedal at all times. So this situation is very common on city roads. For example, in the subject 3 exam, when you encounter a crosswalk, you should release the accelerator, slow down the car, and observe if there are any pedestrians who are ready to cross the crosswalk from left to right.

The advantage of releasing the accelerator is that it can avoid the tragedy caused by mistaking the accelerator for the brake in some emergency situations. In fact, many people's driving habits like to step on the accelerator with one foot deep and one foot shallow. The same is true on highways, for example.

In addition to the above situations, in fact, it is often a matter of personal driving habits, because if you keep stepping on the accelerator while driving, on the one hand, the speed of the car may go up, on the other hand, you have been listening to the roar of the car, at this time you always feel that you have to give up the accelerator, just like habitually riding a motorcycle to twist the accelerator a few times, and then driving at this time.