How to set up the Internet caf route for 136 machines?

If all machines are on the same network segment, this kind of event will definitely be caused because the collision domain is too large. It is recommended to divide VLANs.

The setup is very reasonable, and there should be a problem with the line of telecommunications. There is no need for a 130-machine Internet café to have a domain. It is still recommended to disable P2P and try it.

Routing a reasonable card now can be a problem with telecommunications.

There is no router.

It's all switches and expressors and that's it.

Just connect it directly to the switch.

It's too specific for you to understand. As long as you know, the entrance line is connected to the WAN port of the router, and the 4 5 machines under the router are 25 numbers. The game does not account for how the network speed is generally 20-30kb s

If the light behind the NIC does not turn on, there is a problem with the local connection, reset the local connection to find the cause of the error. If the light is on, you can't go to the net. Is it wrong to set the router, just find a clear setting.

Are you directly connected to a router or a switch at an Internet café?

You don't ask online.

Even if someone knew, they wouldn't tell you.

You'd better check with the relevant agency.

Coming to power tp-link should be fine.

Experience talks about slow death for you.

Soft land is the right way.

16 machines

Just set up route auto-assignment directly.

The binding of the Mac can actually be done with the help of some flow control software, such as P2P terminator or something

You don't need to set it up, just plug it in and configure it as an IP segment.

If you need to set up an intranet server, provide movie intranet** services or something, you can put the server on the main router.

As for the division of several zones here, if it is not for security reasons, put it in a network segment, so that you don't need more routers, after all, the switch is cheaper. Besides, even if you require security to be isolated by a VLAN, you can do it.

If it is divided into several network segments, it is fine, but the pressure on the router is a bit too great, and for balance reasons, it is not recommended to overload a device for a long time.

For example, if there are multiple routing ports in the router, you can have a network segment for each port, if they are all switching ports and WAN ports, your computers with multiple switches are all in the same network segment.