Wireless router can t get online, what s going on?

Not quite sure what model your router is. There are two kinds of addresses, and; First, connect the computer directly to the router through the network cable, enter the above address in the IE address bar, and try to see which one can enter. Generally, the new router self-set username and password are admin, enter the back point of the setup wizard, the next step, and then you will be prompted which way to connect, the general broadband dial-up mode selects the PPPoe option, and then enter the account and password given to you by the operator.

After setting, you can get on,In addition, if you want to use the wireless function, you must first set the wireless function,Click wireless settings,Set the basic settings first,After setting, the wireless security settings should also be set accordingly,Generally, use WPA2 PSK mode,But some old-fashioned notebooks can't be recognized,You can also change to WPA2 mode。 Restart the router, disconnect the network cable, turn on the wireless function of the laptop, find the signal, enter the password you set before, and you can surf the Internet normally.

Is your router configured? If you buy a router and you can access the Internet without configuration, do you still have to pay for broadband?

Let's set up both WLAN port and LAN port. It should be fine.

1. Check the line connection.

Ordinary network cable routers have 1 WAN interface and 4 LAN ports (some routers only have 2 or 3 LAN interfaces), please follow the following method to connect the correct line.

1) The WAN interface on the router needs to be connected to the network port of the cat with a network cable. If you don't use the cat for your home's broadband, you need to plug the broadband network cable into the WAN port of the router.

2) If you have a computer at home, you need to connect to the LAN interface with a network cable, any LAN interface is OK.

2. Check the way you access the Internet.

The Internet access mode in the router (some routers are called: networking mode, connection type, WAN port connection type, etc.), if the setting is high and chaotic error, it will cause the router to fail to connect to the Internet, that is, it cannot be used normally after connecting to WiFi. The wifi has been connected vertically, and the Internet is not available.

3. Operator Restrictions.

Broadband operators in some regions will restrict users from using routers to access the Internet by binding the MAC address of the user's computer. In this case, after setting up the router normally, the router will not be able to connect to the Internet.

The reason why the router is connected but can't access the internet is a setup issue, here's how to fix it:

Prepare materials: WiFi, smartphone.

Method 1, 1, open "Settings" on your phone, and click "Waln".

2. Enter the details page of this wifi.

3. Change the IP setting from "DHCP" to "Static".

4. Finally, click on the upper right corner"Tick it".

Method 2: <>

2. You can see that you can go online at this time.

Other methods are recommended to solve:

1. Use other mobile phones or devices to connect to wifi to try whether you can access the Internet, and rule out the wifi itself.

2. Restart the router to try, or restore the router to factory settings, then dial up the Internet again, and reset the wifi according to the setup wizard, or change to a new router and dial up to connect to the Internet.

3. Contact broadband customer service to confirm whether there is any abnormality in the broadband, such as arrears, recharge the broadband, and then dial up the connection.

4. If the wifi name contains Chinese, it is recommended to modify it to English or a combination of English and numbers before connecting.

5. If the above reasons are ruled out, it is likely to be a problem with the mobile phone system for a long time, it is recommended to restore the factory settings or flash the phone to see if it can solve the problem. For more preferential information, users can pay attention to Anhui Telecom WeChat***.

The wireless router is connected, but there is no Internet access. Authentication is required because the password is incorrect and you need to reconnect.

1. In the wian of the mobile phone, you can see that the wireless connection cannot be connected to the router, indicating that there is a problem with the authentication.

2. Power off the router for about 5-10 seconds and turn it back on.

3. Tap the connection name on your phone, then tap the Don't Save button.

4. Then tap the connection name again, re-enter the wireless password, and select the connection button.

5. Wait a while, the router can verify that the password is correct, and now it shows that it is connected.

If the wifi is not connected, it may be that the router has no network, contact the network operator to deal with it, or look at the settings on the phone, find the wifi, remove this network, re-enter the password to try, in general, you can solve the problem.