How to get wifi with a wireless router

How to set up a wireless router.

Go to the electronics market to buy a router, let the store help you connect once, buy it back and don't remember to read the manual again, it's very simple, a total of only a few steps. Roughly, the cat or network cable is connected to the router, and the router is wired to the computer. computer IE input dlink); tplink)。

Enter the username and password in the dialog box as admin, and enter the router configuration page. The first step to access the network is to configure the Internet user name and password provided by the operator, which is generally the first option on the router configuration interface. The second step is to configure the wireless network name, i.e., SSID and password, and freely set it to provide wireless network access.

The third step is to change the username of the router login cipher machine, which is in the final setting options. After saying that, give points. Thank you!

After the setup, the router will automatically reboot and stay on after restarting. In the future, the computer does not need to dial up the Internet again, and the mobile terminal can find the set SSID through the WLAN with the setting option enabled, and enter the password to access the network.

Actually, this one is very simple.

1. Set up the wireless of the router.

1. Plug one end of the network cable into the LAN port of the router, and one end into your computer.

2、Open the browser,Enter the address,Or the password is generally admin3、There is a wireless setting after entering,Generally as long as you care about the wireless encryption method,It's wap2 (it should be this letter.。。 ）

2. Set a password.

1. Check the network cable pulled by your landlord to your router.

2. Go into the router again and click Run Wizard.

3. The dialing method is generally pppoe.

4. Restart the router.

3. Swim wirelessly.

Dear, if you have a wireless router, check the brand, place a manual on the Internet, take a look at it, ** and Mao, search for it, you are white, absolutely look at it twice and comprehend, I promise.

Under normal circumstances, your wireless router is turned off, DHCP wireless connection can be set up, but some win7 systems are more sensitive to IP and prone to problems.

Wifi must be wireless. That is, unlimited LAN, wired cannot be called wifi.

The manual for setting a password router says that different routers have different methods.

Using wifi is very simple, open wifi search on it, if there are wifi hotspots around, the connection can be used, of course, this is unlocked, and there are locks, which you need to know the password to connect.

After connecting the line, enter the router to set broadband dial-up, and restart the router to access the Internet after saving.

The line connections are as follows:

The steps to set up dialing are as follows:

1. Look at the nameplate or manual at the bottom of the router to find the router IP, default account and password;

2. After starting the device, open the browser, open the IE browser, enter the router IP and press enter, such as. If not, it means that the IP has been modified, and the router needs to be restored to factory settings, just press and hold the reset button of the router, the indicator lights will all go off, and then turn on again, it means that the factory reset is successful;

3. Enter the router login interface, enter the default account and password, if not, you need to restore the router to factory settings;

4. After selecting the setting wizard, a window will pop up to explain that you can set the basic parameters of the router through the wizard, and click Next directly;

5. According to the setting wizard step by step setting, select the Internet mode, usually ADSL users choose the first PPPoE, if you use other network service providers, select the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

6. Enter the account and password applied for from the network service provider, and go directly to the next step after the input is completed;

7. Set the wifi password, try to make the alphanumeric combination more complicated and not easy to be rubbed into the network;

8. After entering correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.

Laptops with wireless network cards.

The answer is, of course, you can go online.

More than 100 of the general wireless. You can buy a 54m one.

The setup method, as with limited routers, is generally typed directly on the IE (depending on your router).

1. First, open the router login page on your browser and enter the login password.

2. Click Login to enter the network status page, and find the routing setting function on the network status page.

3. Click on the route settings to enter the default page of route settings.

4. Click the wireless setting with the mouse to enter the wireless setting page, which is the wifi setting.

5. Enter the wireless password and click Save, so that the router is connected to the wifi and the setting is completed.

Additional answer: A router is a device that connects to various local area networks and wide area networks on the Internet, and it will automatically select and set routes according to the situation of the channel, and send signals in the order of the best path. Routers have been widely used in all walks of life, and various products of different grades have become the main force to realize the internal connection of various backbone networks, the interconnection between backbone networks, and the interconnection between backbone networks and the Internet.

and broadband. Do you have them all? Questions.

Ask a question that I don't know the password.

Ask okok

(username and password admin) to log in to the router management page. In "Network Settings" === > "WAN Port Settings", select PPPoE as the connection mode, then fill in the broadband account number and password, and save. What's more:

Find the MAC address clone and click the "Clone MAC Address" button. Save, the route automatically restarts ......

Now just enter a ** and see if you can access the Internet!

4. The rest of the computers that are connected to the Internet do not need to set up routers. Connect to the routing LAN port with a network cable and set the network parameters.

Laptops with wireless network cards.

The answer is, of course, you can go online.

The function of the signal. After finding it, it's the same as your computer...

More than 100 of the general wireless.

You can buy a 54m one.

The setup method, as with limited routers, is generally typed directly on the IE (depending on your router).

Here's how to set up a wireless router to connect to the Internet

1. Connect the power supply of the router, and then plug one end of a network cable into the network port of the computer, and the other end into the LAN port of the router.

2. Open the browser of the computer, enter the IP of the router in the address bar, click the enter key to enter the settings page of the router, the user name is admin, the password is blank, click to log in, and enter the settings home page of the router.

3. After logging in to the homepage, select Manual Settings. Then select Manual Internet Settings, and Home Dial-up users select the PPPoE connection type. Enter the username and password given by the ISP provider correctly in the username and user fields, and the save is complete.

4. The wireless router also has a wireless encryption to ensure the user's wireless security. Select the wireless settings on the main page of the router's settings, select an encryption method in the security mode, any one of WEP, WPA, or WPA2, and then enter 8 or more Chinese characters or numbers as the wireless password in the security key, and the router settings will be completed after saving the settings.

5. After the setting is completed, the router will automatically restart, and the external network cable can be used by connecting the external network cable to the WAN port of the router.

I haven't used this brand.,It's generally login.,Username admin,Password admin,Maybe it's the web page of ZTE.,Log in to give wireless a name.,Set a password.,That's it.。

Log in, the default username admin, password admin, after logging in successfully, turn on the wireless function, and at the same time give the wireless name, set the password, and then restart the route.

How to set up a wireless router.

How does your department use access to the Internet?

If it's the kind you want to enter **, you can't use a route.

If it is a static IP address that is not bound to a MAC address, you can enter the static IP assigned to you in the route setup wizard.

If it is a static IP binding MAC address, you need a router with MAC cloning function to input the IP+MAC assigned to you into the route.

If it's a dynamic IP, use ipconfig all to see what the IP is automatically assigned to you, and then set it according to the method of static IP without binding MAC address.

How to set up a wireless router.

If you have broadband at home, spend about 100 yuan to buy a wireless router, and you can set it up and install it yourself.

If it is a broadband cat connection wireless router that requires dial-up, set it up as follows:

1. Plug in the wireless router, don't connect the cat first, and connect the computer to any LAN port of the wireless router;

2. Enter the IP address of the router in the address bar of the browser (on the label behind the router), and enter the login username and password to enter the settings page;

3. Set up according to PPPoE (ADSL virtual dialing), enter the Internet access and password;

4. Set the SSID, encryption method and password;

5. Save and restart;

6. After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.