The refrigerator is in the kitchen, why does the power supply of one of the plug in refrigerators in

The refrigerator is slightly more powerful, and it is a power load. Generally, household circuit breakers are control circuit breakers. The situation may be caused by the small rated current of the kitchen leakage protection circuit breaker.

You can plug the refrigerator into the kitchen socket and feel the temperature when the circuit breaker trips.

Solution: Place the refrigerator elsewhere and use a different outlet. If you insist on keeping it in the kitchen, buy a power strip to connect it to other local power sources.

It is not recommended to replace the circuit breaker, and the replacement of the subordinate circuit breaker will affect the reliability of the main circuit breaker, that is, the main switch should also be replaced. Troublesome!

Hello, if there is a tripping situation, it is certain that the kitchen plug or line is connected to the power, it is recommended to use a universal meter to detect and deal with the problem in time.

It is very likely that it is because you are using too much power, which leads to this phenomenon, and it is recommended that you try it with a small power.

When using kitchen equipment, if the current of the same socket is too large and exceeds its load, this will cause tripping, which is a safety protection measure.

If you want to use a kitchen power supply in the kitchen, the refrigerator power will trip, it may be because the power of one of the power strips is too small, so it will cause it to leak power, and the protection will automatically trip, so it is recommended that you change to a more powerful power strip, or check whether the electrical appliances have leakage?

This means that the total voltage of your home is not enough, that is, the square of electricity is not enough, and in this case you need to change the wires.

That's because there is a short circuit in the refrigerator, so the power supply will trip, and it is necessary to check and repair it before using it, so that it is safer.

The refrigerator uses a plug row in the kitchen, and if the power supply of the refrigerator jumps, it may be that the circuit in the kitchen is not enough, and the whole needs to replace a larger line, so this situation will occur.

If the power supply of one of the kitchen plug-in refrigerators will trip, it can only mean that the voltage in this kitchen is too high to move, and it is best to put the refrigerator in the living room.

The refrigerator is in the kitchen, why does it trip when using the socket in the kitchen? It should be that your power is too big, and it should be divided into two sockets, and some may be your sockets and have power limitations.

The refrigerator is generally not overloaded, this situation is generally the wire head is virtually connected, according to U=IR, the voltage is constant, the resistance decreases, the current increases, and the refrigerator compressor starts with a large current, resulting in the circuit breaker overheating action tripping.

If one of the plug-in refrigerators in the kitchen has electricity leakage, then it will trip due to electricity leakage when it is working.

This shows that the power supply of the refrigerator is the same line as the kitchen, and the power supply of one of the rows is the same line, if it is short-circuited when used, then there is no power supply on the refrigerator side, which means that it is the same line.

Maybe it's a short circuit in the power supply, or maybe it's caused by the power being too big and the strip belt is not moving, and the specific reason is to ask the electrician to help take a look, safety is the most important.

It may be that the power of the power strip is too small to bring the electricity of the refrigerator, so it will trip as soon as it is used.

Refrigerators are plugged in the kitchen, and they trip when used with others because they have too much power. It's good to check it separately.

It means that there is a problem with your wiring, or the grounding of the refrigerator is not done well, and this situation will occur, it must be a short circuit in the electrical appliance.

You can change a socket to try, after changing it does not trip, it means that the refrigerator is no problem, the socket has leakage, if it is replaced, it will still jump, the refrigerator has leakage or damage fault.

Fridge in the kitchen. Use the kitchen, one of the plugs. Refrigerator. Refrigerator. The power supply will trip. It's just that the power is too large. It's super reunited.

Why do you say that Binjiang is in the kitchen, and the power supply of one of the plug-in refrigerators in the kitchen will trip. That means you have too many things plugged into this power strip. If you turn it on at the same time, the current will be too large.

If I'm looking for it, it's supposed to be something, and the current is too big, so she can't take it, and I'm going to jump.

If it's not the power supply of your refrigerator, it's because the power of your refrigerator is too large, and it's easy to trip.

Hello friend because your refrigerator may leak, you can find repair appliances to see, because the refrigerator has a ground wire, the socket also has a ground wire, it may trip, if the socket does not have a ground wire, it will not,

Because the load is too heavy, the Anhui small of the switch will trip if it is too heavy.

In your case, there must be leakage to cause tripping. You can use a shaker to test the insulation of your refrigerator's compressor to see if it is on the ground.

This means that there is a problem with your socket row, it may not be compounded, it may not be so big, and there is a short circuit.

It may be that this socket is not very stable, so it will trip.

Common causes:

1. It may be that the socket terminal of the refrigerator is loose, which causes the refrigerator to be plugged in and tripped.

2. It is also possible that the power cord of the refrigerator is damaged.

3. The thermostat of the refrigerator has leakage.

4. The compressor of the refrigerator is faulty, and the coil of the compressor is damaged, causing the refrigerator to be plugged in and tripped.

5. The load on the line connecting the refrigerator is too large, resulting in the refrigerator not being able to use normally.

6. There is also a situation that the bearing capacity of the circuit breaker is too small.

Suggested workaround:

1. First of all, you can turn off the power supply of the socket, check whether the terminal of the socket is loose, if it is loose, it needs to be re-tightened.

2. Then you can use a multimeter to measure the resistance of the power line, if the resistance is 0, then it may be that there is a fault inside the refrigerator, or there is a fault in the power line, you need to find a professional maintenance personnel to check, if the compressor is faulty, then you need to replace the new compressor, if it is a problem with the power cord, replace the power cord can solve this problem.

3. Check whether the thermostat is leaking, and you need to replace it with a new thermostat.

4. In addition, it is necessary to check whether the bearing capacity of the circuit breaker is too small, and if it is too small, the circuit breaker and the overall circuit need to be replaced.

The refrigerator is in the kitchen, why does the power supply of one of the plug-in refrigerators in the kitchen trip? The refrigerator is in the kitchen, why does the power supply of one of the plug-in refrigerators in the kitchen trip?

Hello, I'm here to answer for you. The refrigerator is in the kitchen, but if you use one of the sockets in the kitchen, it will trip, because the load on the wiring in your kitchen is relatively small, which causes tripping, which is a safety protection mechanism. If your refrigerator must be placed in the kitchen, it is recommended that you use a power strip to connect it to an outlet in another room while the kitchen is using other power sources.

Summary. Analysis of the causes of tripping: a:

It may be that there is a problem with the wiring of the refrigerator, first check whether the wiring is reversed, open or short-circuited, if the wiring is correct, then it may be a problem with the refrigerator itself; 2: It may be that the line current in the kitchen is too large, and it exceeds the rated capacity after being inserted into the refrigerator, resulting in the line tripping. You can check whether the rated current of the kitchen line is enough to support the refrigerator; Three:

It may also be that the kitchen wiring is of poor quality, or the refrigerator does not work properly and trips due to electromagnetic interference generated when kitchen lighting and other equipment are working; Four: Other possible factors are poor power quality, fuse aging failure, etc. All in all, there may be many reasons, it is recommended to check whether the wiring of the refrigerator is correct, then you can consider whether the capacity of the line current of the circuit is sufficient, and then carefully check other possible causes, and finally you can ask an electrician to help solve the problem.

Kitchen 1 plugged in the line to plug in the refrigerator tripped, plugged in other electrical does not trip, please ask what is the reason, thank you.

Kitchen 1 plugged in the line to plug in the refrigerator tripped, plugged in other electrical does not trip, please ask what is the reason, thank you.

Hello, glad to answer for you. Kitchen 1 plugs in the line and plugs in the refrigerator to trip, and plugs in other electrical appliances without tripping, which is due to the aging of the wires.

Other appliances have little power.

The fridge has a lot of power.

So this leads to tripping.

I don't jump when I plug it in.

Analyze the reasons for tripping: one: it may be that there is a problem with the wiring of the refrigerator, first check whether the wiring is reversed, open or short-circuited, if the wiring is correct, then it may be a problem with the refrigerator itself; Two:

It may be that the line current in the kitchen is too large, and it exceeds the rated capacity after being plugged into the refrigerator, causing the line to trip. You can check whether the rated current of the kitchen line is enough to support the refrigerator; Three: It may also be that the quality of the kitchen line is not good, or due to the electromagnetic interference generated when the kitchen lighting and other equipment is working, resulting in the ice closure of several boxes can not work normally and trip; Four:

Other possible factors include poor power quality, aging fuses, and car head hunger and fatigue. All in all, there may be many reasons, it is recommended to check whether the wiring of the refrigerator is correct, then you can consider whether the capacity of the line current of the circuit is sufficient, and then carefully check other possible causes, and finally you can ask an electrician to help solve the problem.

Hello, you can take a look at these reasons.

I think it's a problem with circuit aging in general.

Or a problem with the refrigerator circuit.

A short circuit in the refrigerator can also cause this problem.

It is good to plug the refrigerator into other circuits.

That must be the switch.

It is the main gate that jumps.

That's right. Short circuit problems are all tripping the main gate.

The first thing to consider is whether the socket is faulty. The detection method is: turn off the power of the socket and check whether the terminal of the socket is loose.

If it is not loose, it is not the outlet reason. If it is loose, you need to cut off the power supply, wear insulating gloves, and tighten the terminal tightly. The reasons could also be:

Damage to the power cord or compressor. The detection method is: use a multimeter to measure the resistance of the power line, if the resistance is 0, the power line or compressor may be damaged.

In this case, the solution is: if the power cord is damaged, you can cut off the power supply first, and then replace the power cord by yourself. If the compressor is damaged, there is no way to solve it by yourself, and you need to ask a professional to repair or replace it.

It could also be due to a malfunctioning temperature switch. At this time, it is necessary to check whether the temperature control switch is corroded to the ground, and if it is to the ground, the temperature control switch of the same type needs to be replaced.

The replacement of the thermoswitch is not complicated and can be solved by yourself. It may also be due to the fact that the circuit breaker has too little carrying capacity.

If the bearing capacity of the circuit breaker is too small, it will also cause the refrigerator to trip. At this time, the circuit breaker and the entire circuit need to be replaced. It is advisable to give preference to replacing circuit breakers, as they are less expensive and easier to operate.

If the entire line is replaced, the cost of money and time is considerable.