Volkswagen Bora 2020 After repairing the tire, the tire pressure monitoring light has been on, how t

Hello, first of all, confirm whether the tire pressure is normal, if the tire pressure is normal, through the tire pressure monitoring button to reset the tire pressure.

Hope it helps!

If you want to reset the Volkswagen tire pressure light, you need to adjust the tire pressure to a normal state, then start the ignition switch, and then press and hold the tire pressure monitoring reset button, you can let go of your hand after hearing the sound of "knock", and then the tire pressure monitoring system will store the normal tire pressure data at this time, and then automatically clear the original data, and the tire pressure light can be reset.

Tire pressure monitoring is not installed to tell you that your car has a flat tire while driving. Instead, let the driver prevent a puncture in advance to see if there is a risk of a puncture. If you don't have a tire pressure monitoring system in your car and don't want to spend a lot of money on one, the most economical way is to have a tire pressure gauge so that you can measure your tire pressure regularly.

Tire pressure precautions.

Some people like to inflate their tires at a higher pressure, believing that this will overload and save fuel. This is incorrect. If the tire pressure is too high, the tire contact surface will be reduced, the wear will be aggravated, and it is also easy to puncture.

The tire pressure is too high, so that the adhesion coefficient of the tire decreases, reduces the braking effect during braking, increases the amount of slip, and causes greater harm to driving safety. It is not good for the tire pressure to be too low, which will cause shoulder grinding, tire bending, and increased fuel consumption. It should be inflated according to the standard air pressure indicated on the tire, and the inflation volume is generally 5% of the standard air pressure is more appropriate.

Hello Volkswagen Bora's tire pressure monitoring indicator elimination button is located next to the gear lever, the specific reset method is: press and hold the tire pressure reset button when the car is turned off, then start the car, then release the tire pressure reset button, short press the car's clock adjustment button once, so that the tire pressure will be displayed in reset mode, and the tire pressure light will be eliminated.

The specific operation steps of the automobile tire pressure lamp reset are as follows:

1. Press the brake pedal of the car and use it to prepare to turn on the power supply of the whole car.

2. Press the car's one-button start button.

3. The dashboard of the car lights up, which proves that the power supply of the whole car is turned on.

4. Inflate the four wheels of the car to standard air pressure.

5. Press and hold the ZHI tire pressure reset button located on the vehicle operation panel for more than 3 seconds to complete the operation.

Volkswagen Bora tire pressure light on, first need to find the tire pressure reset button in the center console of the car, and then press and hold this reset button, the time lasts for 3 seconds, then the tire pressure data of the car tire will be re-saved, and the tire pressure indicator will go out.

If the tire pressure indicator lights up during driving the car, in this case, the driving speed of the car should be reduced in time, to avoid rapid direction and sudden braking, and the use status of the car's tires needs to be checked as soon as possible.

If the tires of the car are abnormal and you can't continue driving, you must hit the ** rescue, and don't force the car.

Summary. Hello, dear, happy to answer for you<>

The 21 Bora tire pressure light reset method is as follows: 1. Press the tire pressure reset button of the car, do not start the car first, 2. Insert the key of the vehicle and start the vehicle, 3. Release the tire pressure reset button and then press the clock adjustment button, 4. Observe the dashboard of the car, it will show that the tire pressure reset is in progress, 5. The vehicle tire pressure reset is completed. Hopefully, the answers will help you.

21 Bora tire pressure lamp reset methods.

The exclamation point lit up.

Hello, dear, happy to answer for you<>

The 21 Bora tire pressure light reset method is as follows: 1. Press the car's tire pressure reset closure button, don't start the car first, 2. Insert the key of the vehicle and start the vehicle, 3. Release the tire pressure reset button and then press the clock adjustment button, 4. Observe the dashboard of the car, it will show that the tire pressure reset is in progress, 5. The vehicle tire pressure reset is completed. Hopefully, the answer will be highlighted to help you.

Hello, dear, after the vehicle tire pressure reset is completed, the tire pressure alarm can be eliminated.

There is no reset button.

Dear, you can do this, press the car button on the left side of the central control display, Zheng Xi selects the vehicle settings on the screen, and then selects the draft cluster call wheel button to open the tire option, and then clicks set, at this time, the system will ask "whether the tire pressure of the four tires is all consistent with the desired value", click OK, the system will display the tire pressure monitoring initialization, and wait for the system to complete the reset.

There is no such button.

Kiss, take a picture of ** and show me, it won't be without.

Kiss, oh on the left side of the central display.

Hello dear, <>

Xianqing Dialect Flower] 21 Bora advantages, the appearance is younger. The new Bora still adopts Zui's new family design style, which is more compelling in appearance and appearance than the old Bora, and has a young and sporty visual sense. The space of the annihilator has been increased.

Compared with the old Liquid Bora, the new Bora has improved the vehicle space, which is very comfortable and is a good model.

1. First press the tire pressure reset button of the Bora car, so you need to pay attention not to start the Bora car first.

2. While holding down the tire pressure reset button, insert the key of the vehicle and start the vehicle.

3. Next, release the tire pressure reset button and then press the clock adjustment button.

4. If you look at the dashboard of the Bora car, it will show that the tire pressure is being reset.

5. After the tire pressure reset of the vehicle is completed, the tire pressure light will be eliminated.

To eliminate FAW-Volkswagen new Bora tire pressure light, you need to start the engine first, then turn on the power supply of the whole car, inflate 4 tires, and make the tire pressure of 4 tires the same, and eliminate FAW-Volkswagen new Bora tire pressure lamp The specific operation steps are as follows:

1. Press the brake pedal of FAW-Volkswagen New Bora to prepare to start the FAW-Volkswagen New Bora engine.

2. Press the one-button start button of FAW-Volkswagen New Bora.

3. The instrument lights of FAW-Volkswagen New Bora are all lit up, which proves that the engine of FAW-Volkswagen New Bora is started.

4. Inflate the four tires of FAW-Volkswagen New Bora to the standard air pressure, so that the tire pressure of the four tires is the same.

5. Press the tire pressure reset button of FAW-Volkswagen New Bora to eliminate the tire pressure light of FAW-Volkswagen New Bora.

Hello, check the pressure of the four tires to open the key, there is a set button next to the gear to hold down for 3 seconds to hear Tong's sound, thank you.

Hello, this should ensure that the tire pressure is normal, and then use the decoder to match, and reset it.

Fill the air pressure to the standard, then rematch it, and run again.

Hello, press the tire pressure reset button is not loose, reset.

How does the 2020 Volkswagen Bora Comfort cancel the tire pressure warning light?

Summary. Hello. Friend.

Elimination method: Press the CAR button on the left side of the central control display, select the vehicle settings on the screen, and then click SET after selecting the tire option, at this time, the system will ask "whether the tire pressure of the four tires is all consistent with the desired value", click OK, the system will display the tire pressure monitoring initialization, and wait for the system to complete the reset.

Hope it helps.

Volkswagen Bora 2020 After repairing the tire, the tire pressure monitoring light has been on, how to eliminate it

Hello. Friend elimination method: press the car button on the left side of the central control display, select the vehicle settings on the screen, and then click SET after selecting the tire option, at this time and the system will ask "whether the tire pressure of the four tires is all consistent with the desired value", click OK, the system will display the tire pressure monitoring initialization, and wait for the boring search system to complete the reset.

Hope it helps.

I hope you can give me a thumbs up, your thumbs up are important to me, thank you.

In the central control position of the car, there will be a set key for the balance pin, which is the reset button of the tire pressure, and the tire bucket wheel pressure can be eliminated by pressing and holding it. Before removing the tire pressure, check whether the tire pressure is too high or too low.

set is the reset key.

Do you see it? How do you do that?

Press and hold. You can eliminate the tire pressure.

Doesn't work. Are you having normal tire pressure right now?

It is a manual transmission, not an automatic transmission.

If the tire pressure is normal, it is an alarm.

Do you have a look at how much ** there is a car key?

Are you in a manual transmission? Which version?

1. Press the multi-**car button. 2. Find the tire option through the knob. 3. Enter the selection of Xian Zheng Sanset 4, press the two buttons below the option 5, and the tire pressure data has been backed up.

The 2019 Volkswagen new Bora tire pressure light is eliminated as follows:

1. There are two ways to eliminate the tire pressure warning light, one is to go to the 4S shop to let the maintenance personnel use professional maintenance instruments to eliminate, and the second is to press the tire pressure monitoring button for elimination;

2. Before eliminating the tire pressure alarm, it is necessary to determine whether the tire pressure of the car tire is normal, and the alarm light can be eliminated under the condition of ensuring that the tire pressure is normal.

3. If you want to maintain the normal tire pressure value, you need to turn on the ignition switch of the rising car, press the button set of the tire inflation pressure control system and keep it, then the tire pressure indicator on the dashboard will light up, and it will be extinguished after confirming the new parameters;

4. If the tire pressure warning light of the car has been lit, it may be caused by the tire inflation pressure is too low, the internal structure of the tire is damaged, the wheel on the axle is too heavily loaded, the wheel is installed with anti-skid chains, and the car uses a temporary spare tire.

5. Volkswagen's tire noise attitude pressure monitoring system usually works with ABS system, if the tire pressure of the wheel is lower than the set value of the system, the alarm light on the instrument cluster will be on.