Apple 5 iphone5 call sound is turned on the most, will it damage the earpiece?

In general, do not turn up the volume of the playback device to the maximum. If it is adjusted to the maximum equivalent to full load operation, the main reason is that the peak value of some audio will be relatively high, and the voice coil will also heat up for a long time, and the speaker may also be burned out. And the louder the sound, the distortion of the sound will increase with the increase of volume, usually above the volume of 2 3, it is not very good, and the landlord's "sound of breaking" also comes from this.

Therefore, it is recommended not to turn up the loudest voice for a long time, and a short time such as ten minutes should not be a big problem. In your case, it's best to use a headset to talk, the sound is loud enough, it doesn't ruin the speaker, and the sound quality is much better.

No, generally if the quality problem is ruled out, there will be no damage, the iPhone will give the handset a variable voltage range, this voltage range will not damage the earpiece, and the sound is harsh, it is likely that the other party's microphone is not good, or the signal is poor caused by the audio quality problem.

Apple5The speaker will be distorted to the maximum,My phone is also like this,I asked Apple's maintenance staff,They all said try not to listen to songs at maximum volume,In this way, the speaker of the mobile phone may appear to be more inferior,There will be no problem when you usually play**,So please feel free to use。 Hope it helps.

Generally, no, it will be tested when the product is designed.

iphone5 earpiece sound small solution:

Reason 1: The iphone5 mobile phone packaging film is not torn or not torn clean, covering the sound hole on the bend.

Solution: Tear the envelope clean and you're good to go.

Reason 2: If the mouth is talking to the microphone and others listen loudly, you try to make a noise when you talk to the hole next to the camera with your hand, if it is loud, it is the effect of noise reduction.

Solution: If you want to stay away from the microphone and let others hear your voice, you can turn on the speakerphone. Or plug that noise-canceling hole next to the camera with your finger. This is more troublesome, and it is recommended to go to after-sales.

Maybe the iphone5 is a substandard product, missing parts, go directly to the after-sales service.

The phone has entered headphone mode.

Workaround:1Use a hair dryer to blow the headphone port of your iPhone on cold air setting for 3-5 minutes, or place it in an air-conditioned room to dry, if the problem is solved.

2.If not, you need to use the iphone's headphones to access the interface, turn on the iphone to listen**, then press pause, press the home button to return, turn off the iphone (without using other third-party software), pull out the headphones, and then turn on the phone, it can be solved, if it is unsuccessful, try several more times.

3.Still doesn't work, long press the home+ shutdown button to perform a hard reboot, and then when the white apple appears, pull out the earphones.

4.None of the above methods work, it may be that the headphone jumper is still damaged in a long-term humid environment, please repair it.

5.If it is purely sudden, such as listening to a song with headphones, and pulling out the headphones or headphone mode (that is, the mobile phone seems to think that the headphones are plugged in, so all kinds of silence, but plugging in the headphones can hear normally), you can use a toothpick to poke the headphone jack, and then continue to gently scrape the inner wall in the jack, and scrape it a few times (because it may be because the chip of the jack has not been able to spring back to the phone's external mode, so it has been kept in the headphone mode).

Flashing can't be solved.,That's probably a hardware problem.,Some time ago, there was something wrong with my speaker.,It turned out to be a hardware problem.,Go to the Apple store and change one.,Yours is the American version.,It's estimated that the domestic can't be guaranteed.,You can only go to the repair shop to protect it.。

My iphone5 Unicom version also has this problem, and there are two iphone5s around me that have this problem, it is a hardware problem. Customer service repairs. It's the spring plate of the headphone jack below that has a problem.

Mine too, I can hear the sound when I just change it, it seems that a small part is loose, and I pressed the earpiece for a while and found that it was okay again.

I just solved this stewed hooves and want to know Mangha to see!

First of all, when we ** get through, there will be an interface with six options, you first click the mute on the left side of it, and then unmute, it's OK! You can use the handset to chat with your friends! Give it a try!

Are you on mute?? There is a small button on the top of the volume button.,Dial it to the bottom to mute.,At this time, you can only use headphones.。。

Just dial it up.

Press it and there will be a sound? It is not a problem with the earpiece or motherboard, but the pins of the speaker are in poor contact with the corresponding contacts, it is recommended to disassemble the machine, and then pull the pins slightly to make it fully contact the contacts, or say that your iphone5 screen is a little too far away from the earpiece, then glue the screen a little tighter with 3m stickers.

If you have to press it with your hand to make a sound, it proves that it is a contact problem, or take it to the maintenance point, tell people about the situation, and prescribe the right medicine.

It should be that there is a problem with the copper piece connected to the earphone on the cable. You try to change the cable. You can find a local wire seller on **, and then come to the door to let someone help you change, which may cost some manual fees, but it will not exceed 50.

Reboot to try, or factory reset, troubleshoot software problems, and then see if it's a hardware problem, if you change**About 30

Is your machine still under warranty? If it is, go directly to the customer service for free replacement, if it is not within the warranty period.

The machine is estimated to have to change the motherboard, which is a big price, and unofficial personnel may not be able to repair it for you. I'm a mobile phone, and generally your kind of problem is not bad for money.

It's best to go to customer service, now the official price is 2098 yuan, and if you have any questions, please ask.

Why don't you go after-sales.

Since you don't understand it, leave it to a professional to do it.

Don't guess.

There is a mute button on the left side of the front of the iPhone, which can be.

1Please press and hold the "Power Button" button on the top of the iPhone ,..

2Then please slide the slider to turn off, and then press the power button to turn on.

3 If it's not the function of the mute button, you can do it next.

4 Click on the "General" option in the settings list, such as:

5. Next, find the "Restore" option at the bottom of the general list.

6. Click on the restore list and select "Reset All Settings"...

7. Then click on the "Reset All Settings" button to get started.

If you have tried all the above methods, it still can't be solved.

9 Then in the summary management interface, click "Back Up Now."

10 When the data has to be backed up, the next step is to start.

11. Then click on "Restore IPH." in the iTunes window....

12 iTunes will then connect to Apple's update server.

13 If you have tried all the above methods, it still doesn't work.

There are 2 possibilities for the Apple 5 phone to have no sound:

First, there is a problem with the Apple 5 mobile phone itself.

Second, if there is a headphone logo in the upper corner of the Apple 5 mobile phone, it means that the Apple 5 mobile phone has entered the headphone mode.

If it is the first problem, you should take it to Apple's after-sales outlets to test, repair and replace parts, etc.

If it's the second problem, you can try to quickly plug and unplug the earphones several times to see if the earphone logo in the upper corner of the phone disappears. If there is still no sound, it is recommended to take it to Apple's after-sales outlets for testing and repair, or replacing a headphone jack and other matters.

1. If the other party's signal is not good, you can't listen normally, so change to a place with a good signal.

2. If the signal in the area where I am located is not good, the other party cannot listen, so change the call to a place with a better signal.

3. If the hardware failure of the other party or my mobile phone causes the inability to listen, go to a nearby mobile phone store or after-sales inspection and maintenance.

4. Due to the damage of the audio processor of the mobile phone, it is recommended to try again after restoring the factory settings, if it still cannot be solved, it is recommended to bring the relevant products to the after-sales service center for testing and processing.

5. Electromagnetic interference, not on a frequency, the microphone is damaged, it is recommended to go to the maintenance point to see where the problem is.

How to identify a refurbished machine]:

Serial number: Every iPhone has an 11-digit serial number (a code consisting of letters and numbers), which can be queried in a professional serial number lookup tool. When buying a mobile phone, you should check whether the serial number of this mobile phone is correct on Apple's official website, if it is a refurbished device that has been repaired such as a refurbished machine with a replacement motherboard, the serial number of the previous banquet is cancelled in Apple's official **, and the query will appear "I'm sorry, this is the serial number of the replaced product".

The latest activation time: the activation time of the new iPhone is not, if there is, it is likely to be a refurbished phone, at least it is also used by people, otherwise it cannot have been activated. Since this is not avoidable in official refurbished machines, this is less important.

But if there is no activation time, then it is definitely a new machine.

Battery life: Like the previous point, the new machine battery has not been used, if we query the iPhone battery has a long usage time record, then it is also a refurbished machine. The way to do this is to go to iPhone Settings - General Wear - Power Settings to check the battery life.

Accessories silk screen, headset workmanship, etc.: It is very simple for the equipment to determine whether it is a Huiyou silver refurbished machine, but the accessories are very considerate of our eyesight. The original data cable, the original data plug has a meticulous texture and no scratches, these are all appearance details, and you can also find some clues if you look closely.

The repair of the earpiece of the Apple mobile phone requires about 80 yuan.

If the Apple mobile phone is just a broken earpiece, can't hear the sound, even if the hand can't hear the sound, then there is a problem with the audio IC, the price of direct replacement in Apple's after-sales service is about 80 yuan, and the repair in the mobile phone store is about 50 yuan.

If the microphone of the Apple mobile phone is broken, it is about 80 yuan to 120 yuan to change it, because the microphone of the Apple mobile phone is connected to the charging socket and the home button. Specifically, you can call after-sales service or go to the store for consultation.

The daily way to clean the handset microphone of the Apple mobile phone:

If it's more obvious external dust, you can use a soft-bristled toothbrush to brush it a few times. You can buy a pack of chewing gum or xylitol or the like, and after chewing, send Zhenxiang to take it out and stick it on the earpiece, which can be pressed moderately to stick out the fine dust in the gaps.

Special attention should be paid to the fact that you must not take sharp objects to poke the dust on the microphone or passenger car speaker, otherwise the more you poke in, the more you enter, you can only disassemble and dispose of it. <>