What brand of toilet flushes well, and which brand of toilet is easy to use

Huida is good, ** not too expensive. I bought more than a thousand, and it's not bad to use. If you have money, you buy toto, Wrigley and the like.

I suggest that there is a toilet called the standard sanitary ware is not bad, my brother's family uses this brand, it is still possible to use, not only the flushing effect is good, but also the surface of what glaze and the like are also very good, flushing is still silent flushing, but also flushed very clean, as for the after-sales we have not yet encountered, because it has been used for a year, my brother's full set of home has not yet had any after-sales problems, but I heard that the French standard after-sales service is still very good, very for the user's consideration.

The big brands are all made, toto, Wrigley, gold medal, the flushing effect is good and water-saving.

Huida is a good one in Henan, not professional at all, recommend you to use Jinnis sanitary ware, Guangdong brand, **Yes! I bought it and the flush was nice.

Generally, it belongs to the Kohler, Wrigley, and Huida toilet brands. Because Kohler, Wrigley, and Huizhida are now among the top ten brands in China.

1. Kohler: Kohler toilet is an American brand, founded in 1873, is one of the oldest and largest family businesses in the United States, and the Kohler brand sells well all over the country.

2. Wrigley: It is a Chinese brand. In 2011, ARROW was awarded the "Leading Brand of Chinese Sanitary Ware".

It can pursue refinement, high-grade, and technological Wrigley toilet brand. It is also one of the most familiar bathroom brands among consumers, and it is also one of the earliest toilet brands in China.

3. Huida: Founded in 1982, Huida is one of the largest and oldest sanitary products enterprises in China. The Huida brand promotes the development of China's low-carbon economy.

From the point of view of flushing method, toilets can be divided into direct flush and siphon.

There are two types, of which the siphon type can be divided into siphon flush down type, siphon jet type and siphon vortex type. 1. Straight flush toilet is to directly use the flush of water to discharge the dirt, in order to make the flushing force greater, the pool wall of this toilet will be steeper than other toilets. Moreover, the water storage area in the center of the pool is relatively small, which is easy to produce the phenomenon of dirt accumulation, and the noise will be louder when used.

The advantage is that it is not easy to cause clogging during the washing process, and the water consumption is small. 2. When the siphon flush toilet is used, the flushing water will be filled in the sewage pipe and generate a certain pressure, and the sewage will be discharged by using these pressures. The slope of the wall of this toilet bowl is generally gentle, and the water storage area is relatively large, so it is easier to splash water.

However, this kind of toilet can flush the inner wall of the toilet bowl relatively cleanly, and the noise is relatively low. 3. The siphon jet toilet is an improved version of the siphon flush toilet, which adds a jet attachment on the basis of the flush type, which makes the sewage discharge speed faster. The water storage area of this toilet is relatively large, and the barrel wall is also deeper, the dirt is not easy to splash out, and it can also effectively reduce the odor, and the noise is smaller than that of the siphon flush toilet.

4. Siphon whirlpool type It mainly uses the tangent line of flushing water from the bottom of the pool along the direction of the pool wall.

When the water level increases, a water level difference will form between the water surface and the sewage outlet in the pool, and a siphon will also be formed to discharge the dirt. Due to the special requirements for the pipe design of this kind of toilet, most of this kind of toilet are conjoined type, its advantages are that the flushing process is fast, the flushing effect is thorough, and the odor of the toilet is relatively small.

Flush toilets flush better.

Because the flush type uses the instantaneous and powerful kinetic energy of the water flow, the sound of hitting the pipe wall is relatively loud. Most of them are flush type. The flush toilet drain pipe has a large drainage diameter after being straight, and it is easy to flush down larger dirt.

Using the large thrust formed by the compressed air, the flushing speed is fast, the impulse is large, the sewage is strong, the speed is fast, the water is less, and there is no leakage.

The difference between the bucket part is the difference between straight punch and siphon. Represented by Comau and some European brands, they are all direct flush type, using British design standards, characterized by simple flushing pipelines, short paths, and thick pipe diameters, generally with a diameter of 90 to 100 cm, and the use of water gravity acceleration can easily flush away the filth.

Other ways to flush the toilet

1. Vortex siphon, the water flow forms a vortex along the pool wall when flushing, which will increase the flushing strength of the water flow on the pool wall, and the toilet flush port is located on one side of the bottom of the toilet, which also increases the suction power of the siphon effect, and is more conducive to the discharge of the toilet viscera.

2. Siphon type, after the drainage pipe is filled with water, there will be a certain water level difference, and the suction generated by the flushing water in the sewage pipe in the toilet will be discharged away, because the siphon toilet flushing is not with the help of water flow impulse, the structure of the siphon toilet is the drainage pipe is "" type, so the water surface in the pool is larger, and the flushing noise is smaller. Siphon toilets are also divided into two types: vortex siphon and jet siphon.

3. Jet siphon, further improvement has been made on the siphon toilet, a jet auxiliary channel is added at the bottom of the toilet, aimed at the center of the sewage outlet, when flushing, part of the water flows out from the water hole around the toilet circle, and part of it is sprayed out by the jet port, this toilet is on the basis of siphon with the help of a larger water flow impulse, and the dirt is quickly washed away.

Flush toilets flush well.

The direct-flush toilet uses the principle of pressure difference to suck away the dirt, the design characteristics are that the pipeline is very simple, the path is short and the diameter is relatively large, the speed is fast, the water consumption is small under the same sewage condition, and the water-saving effect is outstanding, but the sound of instant flushing is large, the odor isolation effect is not satisfactory, and the quality is poor and there is a possibility of aftertaste. It is suitable for families with high sewage discharge requirements and high water saving requirements.

Although the path of the flush flush pipe is short, its pipe diameter is thick, generally 9-10, and it can use the gravity of water to flush the excrement in the toilet; Moreover, it is not easy to cause blockage in the process of washing, which means that there is no need to prepare a paper basket in the bathroom. However, due to the small area of water storage, it is also prone to fouling.

How to choose a toilet:

1. Choose a toilet with better punch.

When choosing a toilet, you need to choose a toilet with better punch, usually when using the toilet, the punch is a very important point, if the flush of the toilet is very small, the toilet is easy to clog when used, and it will also affect the normal use. When we judge the quality of the toilet flush, we can confirm it by listening to the sound of the water, which is also a relatively easy method.

You can choose according to your own needs when choosing, if it is a bathroom in the bedroom, you can choose a toilet with a relatively low sound, so that it will not affect the rest of your family at night. If it is a different bathroom, you can also choose a toilet with a higher flush force.

2. Check the leak-proof effect of the water tank.

All toilets will have a water tank, you must pay attention to the leak-proof effect of the water tank when choosing a toilet, and do not buy it if there is a leak. Many friends will ignore the problem of whether the toilet tank will leak, and if there is a leak, it is not easy to find that it leaks from the edge, and it is not easy for everyone to notice.

You must do a good test before purchasing, and you should also pay attention not to ignore the problem of leaking toilet when you use it.