Which disc is used to install Lenovo computer programs?

Turn on the computer, put the XP installation disc in the optical drive, then press and hold the del to enter the BIOS, and set the CD-ROM to the first boot! If prompted"boot from cd", press enter.

2.Enter the splash screen, select Install WinXP, press Enter to install! Pressing enter may appear"press any key to boot from cd"At this time, continue to press enter, otherwise the hard disk will start.

3.Select the 1st one, press enter, and start the installation, reading the driver to memory.

4.After loading the driver, you can see the partition of your hard disk, and it is recommended to install the C drive. It should be noted here that if you want to do a clean install, then you need to format it, so the key to formatting is to delete the C drive first.

Only the XP installed in this way is a brand new XP. So please move the cursor to the C drive and press"d", delete partition C.

5.You pressed"d"After (delete), XP will confirm that you will lose data because you are afraid that you will delete it by mistake and prompt deletion. Of course, I'm just going to format it and then install it, so please press it"Enter"Go on.

6.Keep pressing"l" 。

7.After deletion, the C drive becomes an unpartitioned partition! Press"Enter"Go on.

8.Here you will be asked to choose the disk format. Let me talk about the difference between NTFS and FTA.

First of all, NTFS has all the advantages of FAT, NTFS has less fragmentation than FAT, high security, can encrypt files, supports disk quota, supports partitions above 30G, supports compression, and compresses up to 50%. I like to use NTFS and declutter the disk very quickly. However, due to the high security of NTFS, the NTFS partition cannot be accessed under DOS, and it cannot be formatted for the boot floppy disk, only the XP disc can be formatted.

So, if you're not sure, it's better to use FAT. The following 4 choices, (fast) means quick format.

9.Press"Enter"Go on.

10.Formatting.

11.The installation begins. The disc installation is automatic, from start to finish, and it is estimated to take 20-30 minutes.

12.Familiar installation screens.

13.Installed, 1st reboot.

14.Installed.

As the most traditional system installation tool,CD has never been abandoned,Even if many computers do not have an optical drive,You can still use an external optical drive to install a system for the computer,Lenovo desktops will be configured with optical drives by default,In this way,As long as there is a system CD,You can install a system for Lenovo desktop computers at any time,So how do Lenovo desktop computers use optical discs to install systems? This article shares with you the Lenovo desktop CD-ROM system tutorial.

How to install win7 original CD.

1. Preparation for installation

1. Lenovo desktop computer equipped with optical height drive or external optical drive.

2. System CD-ROM: System CD-ROM production method.

3. Operating system: windows7 free activation installation version.

4. The general memory is installed with a 32-bit system of 3G and below, and a 64-bit system is installed above 4G of memory.

2. Boot Settings from Disc:What is the system button for Lenovo computers?

3. The steps of Lenovo desktop CD-ROM system are as follows

1. Put the system disc on the optical drive of the Lenovo desktop computer, press the F12 boot hotkey without stopping after restarting, select the *** option in the pop-up boot menu, and press the enter key;

2. If the computer shows pressanykeytobootfromcd....Press enter directly, boot from the disc to enter this installation menu, press the number 2 or click option 2 to run [Windowspe Micro System];

3. After entering the PE system, step 5 directly without partitioning, if you need to partition the whole disk, double-click [Partition Tool DiskGenius] on the desktop, and then click [Hard Disk] - [Quick Partition];

4. This window pops up, set the number and size of partitions, the system disk is generally more than 35G, 50G is recommended, click OK to perform the partition operation;

5. After completing the partition, double-click [Auto Restore Win7 to C drive], this prompt box will pop up, and directly click OK to perform the system restore operation;

6. Enter this interface and perform the operation of system restoration to C drive, this process takes about 5 minutes;

7. After the decompression is completed, the computer will automatically restart, then you can take out the system CD, and after restarting, the installation of system components and the system configuration process will be executed;

8. It takes about 5-8 minutes to install the stupid disguise, reboot into the new system desktop, and the process of installing the system on Lenovo desktop computer CD is over.

Lenovo desktop disc installation system tutorial is shared here for everyone,Users who don't know how to use a disc to install the system,You can learn the above steps,I believe you will soon be able to learn to use a disc to install the system yourself。