What should I do if Gionee phone stays on the boot surface after resetting factory settings? 5

Updated on number 2024-02-25
6 answers
  1. Anonymous users2024-02-06

    The phone has been stuck on the boot screen when it is turned onSolution:

    1. Force press and hold the power button to restart the phone;

    2. After restarting, you still can't enter the desktop, you can only restore the factory settings;

    3. The above two steps are not allowed, and the after-sales service station is sent for repair.

    The steps to do a factory reset are as follows:

    1. Turn off the phone completely;

    2. When the phone is turned off, press the power button first, and then immediately press the volume down button + volume up button at the same time and don't let go, it will enter recovery after a while, note: press the volume up and down keys in recovery mode to select, and press the power button and home button to indicate OK;

    3. After entering the recovery mode, you can choose to restore factory settings, whether your phone is the recovery that comes with the system or the recovery of a third party, as long as there is [wipe data factory reset];

    4. Select [Wipe Data Factory Reset], then press the boot button to confirm, and then select [yes - delete all data].

    5. Then re-select [Reboot System Now], press the power button to confirm, and then start the phone.

    Recommended on 2018-03-29

    See all 9.

    Looking for Gionee M6 how to restore factory settings? Only.

    Gionee M6 how to restore factory settings Procurement and wholesale, all in Alibaba! Alibaba, gathering a large number of business opportunities.

    Why still not.

    Huang Xian v Xiaoxue.

    No, I've been repeating the English alphabet to turn it on.,I used it for others.,I don't know how I did it in the first place.

  2. Anonymous users2024-02-05

    The only way to do this is to flash the machine.

  3. Anonymous users2024-02-04

    1. Because Gionee mobile phone manufacturers are yellow. If it was before. Pressing the factory reset normally is responsive.

    Now if you press it, there is no response. Just press the *well 8702 well on your phone. Then several options appear, select that one to factory reset and you're good to go.

    It will be completely cleared on the phone.

    2. It is estimated that most of the cases are still mobile phone stuck problems, etc., if not, force the shutdown, and then turn on, it is estimated that the mobile phone will be better, and then do not carry out other operations, directly restore the factory settings, it may be successful.

  4. Anonymous users2024-02-03

    The question goes like this. Because Gionee mobile phones, their manufacturers are yellow. If it was before.

    You press the factory reset normally to be responsive. Now if you press it there is no response. I'll tell you how.

    You just press the *well 8702 well on your phone. Then several options appear and you select the one that factory reset can do. It will be completely cleared on the phone.

  5. Anonymous users2024-02-02

    I haven't used Gionee mobile phone, I'm not sure about this problem, it is estimated that most of the cases are still mobile phone stuck problems, etc., if it doesn't work, force it to shut down, and then turn it on, it is estimated that the mobile phone stuck will be a little better, and then don't do other operations, directly restore the factory settings operation, may be successful, now it seems that Gionee mobile phones are out of business, if it is broken, it is difficult to guarantee the after-sales service, it is really not good to be a brick.

  6. Anonymous users2024-02-01

    Open your phone's desktop and find the icon for Settings. Go in from the Settings point, then swipe down on the screen to find the words More Settings. Again, click More Settings to go in, swipe down on the phone screen, and find the words Backup & Reset.

    Then click in, another page will appear, and you will find the factory reset.

Related questions
10 answers2024-02-25

Set it up, Step 1Turn on the power supply, and then plug in the network cable, plug the line into the WAN port (usually the blue port), and then connect with the computer network cable just plug in which LAN port, after doing these jobs, then you will see that there is an address and account password behind the router, after connecting, enter the address you see in the router in the browser, generally of course, if you are using ** online Internet access at home, then you have to prepare an additional modem, commonly known as "cat"). >>>More

12 answers2024-02-25

Hello to hours after it is done.

I will send you the certificate, key, tutorial, computer and mobile phone signing tool together, please make sure that the mobile phone serial number and email address you left are correct, don't forget when you receive it, please look for the email of [Yanyan children]. >>>More

11 answers2024-02-25

I didn't back up my stuff before I deleted it. I regret it now. >>>More

10 answers2024-02-25

Step 1: iPhone activation needs to install the SIM card first, so the first step of activation still needs to install the SIM phone card first, the second step, after installing the SIM card, we can turn on the phone next, by pressing and holding the power button on the top of the iPhone for a few seconds, you can enter the initial boot interface, Step 3: Set the iPhone language. >>>More

11 answers2024-02-25

Hello landlord. A factory reset can be found in the phone settings. >>>More