How to activate network 4 after factory reset on iphone10

Step 1: iPhone activation needs to install the SIM card first, so the first step of activation still needs to install the SIM phone card first, the second step, after installing the SIM card, we can turn on the phone next, by pressing and holding the power button on the top of the iPhone for a few seconds, you can enter the initial boot interface, Step 3: Set the iPhone language.

We need to use Chinese Simplified, so when selecting the setting language, select "Chinese Simplified".

Step 4: Select your country or region.

Here we need to choose "China".

Step 5: iPhone Keyboard Settings.

Since the introduction is to connect to the wifi wireless network activation, it must be in the environment of the wireless network to carry out, enter the wireless password, and connect it.

After completion, we can enter the IOS system network welcome interface, we can choose to accept, step 7: iPhone mobile phone iOS location service settings, here we can choose to enable or disable the "location service" can be, because later in the system can also be set, so users can choose one at will.

Step 8: Set up your iPhone

The next thing we enter is the iPhone settings, since it is a new phone, we need to create a new iPhone, so here we need to select "Set as a new iPhone", or you can choose not to create.

Set to a new iPhone to skip ID application.

Step 9: Set up iCloud

Here you can choose not to use it for the time being.

Step 10: iPhone fingerprint ID settings.

Use targeting. Reports are not sent.

Siri is not used

iPhone Activation Complete: Welcome.

After that, you will see the new iOS system interface.

Look at my head, there is surprise - joy ha、-- 5 get u7 heh.

1. Install the SIM card.

2. Press and hold the power button on the top of your iPhone for a few seconds to enter the initial boot interface.

3. Set the iPhone language to Chinese Simplified.

4. Select the country or region as China.

5. iPhone keyboard settings, the default here can be, directly click "Next".

6. iPhone is connected to the wireless LAN, because the introduction is to connect to the wifi wireless network activation, so it must be carried out in the environment of the wireless network.

7. After completion, we can enter the iOS system network welcome interface, choose to accept the iOS location service settings of the iPhone phone, and you can choose to enable or disable the "location service".

8. To set up an iPhone, you need to create a new iPhone, so you need to select "Set as a new iPhone" here, or you can choose not to create it.

9. Set it to a new iPhone and skip the ID application.

10. Set up iCloud, you can choose not to use it temporarily.

11. iPhone fingerprint recognition settings.

After that, it will show that the iPhone activation is complete: Welcome.

2.Once you're on the welcome screen, swipe up from the bottom of the screen to enter the activation settings page.

3.Click [Chinese Simplified] - [Chinese mainland] - [Keyboard language], and then click [Next] to connect to wifi.

4.Enter the waiting activation page, and wait for a while to activate successfully.

5.After successful activation, follow the prompts to set [Data & Privacy], [Face ID], [Create Password], etc. to start using it.

Which upstairs tells you that you don't need to activate it after recovery?

Must be activated. After my little 4 recovered, I could only call emergency**.

And if you activate it, you don't have to be able to use any card.

I bought my mobile card with my phone.

Later, because it won't mess up and stuff a whole bunch of applications.

If you want to give him the format, drop the dot and restore it, and then open it again, you can only make an emergency dial.

With a mobile card can not excite live to say that my iphone 4 is damaged.

Later, I changed to a Unicom 3G card.

You can also go to ** to find more than 20 pieces of iphone4 universal activation card.

No need to activate it.

Just jailbreak is fine.

You can enter the system with a jailbreak.

All 4 generations of SIM cards must be reactivated. Connect to your computer and activate with iturns.

In the first step, after the recovery, it is like a new purchase, except for the system software, everything else will be deleted.

Step 2, activation steps: insert the SIM card of the mobile phone, turn it on, select the language, select the region, choose whether to connect to the Internet, select whether to locate it, skip the ID, and use it as a new iPhone.

The third step, if there is no ID lock, the card can be activated by connecting to the wireless network.

Steps: 1. Press and hold [Volume Up], [Home Button], and [Power Button] at the same time in the shutdown state, and wait for the screen to light up before you can release it and enter Recovery mode.

2. After entering the recovery mode, the English selection interface will appear, select wipe data factory reset to confirm - and then select the middle line yes--delete; Are you sure.

3. Select Wipe Ca Che Partition again.

4. Finally, select the first option, Reboot System Now, and restart the phone. Note: When doing the above, be sure to back up your phone's personal information, books, text messages and other important data, because these data will be erased when unlocked.

1. Most of the reasons why you can't activate it are because you forgot your phone's ID password, and if you forget your Apple ID password, you can retrieve it through Apple's official website. 2. The mobile phone does not have a SIM card: the mobile phone cannot be activated without a card, please insert the card and then activate it.

3. The card is damaged or the phone has been upgraded: Some locked mobile phones need to be used with the card, no card, card damage or the phone has been upgraded will cause the phone card to be unreadable and cannot be activated, please replace the card. 4. Not plugged in:

It may be that the card is not inserted properly, resulting in the phone not recognizing that the SIM card cannot be activated, so unplug it and reinsert it. 5. Card or card slot damage: You can insert other mobile phone cards to try, and then put the SIM card of the mobile phone itself on other mobile phones to see if there is a signal, if the card slot is damaged, it is recommended to replace the card slot, if the SIM card is damaged, please go to the business hall to replace the SIM card.

6. The server is busy or the phone is not connected to the network: Please confirm that the wifi connection of the mobile phone network can be connected, if the server is busy, please try to activate the iPhone later and it cannot be activated after factory reset.

After the factory reset, the phone needs to be reactivated (make sure that the phone is inserted with a SIM card), and the ID does not need to be re-applied. Take activating via WiFi as an example, here's how:

1. When you turn on your phone, the first thing you enter is the welcome screen to select a currently available wireless network connection. Once connected to the WiFi network, you can choose to restore from a backup (for users who have previously backed up), or if you haven't backed up before, select the Set as new iPhone option.

2. Then you will be asked if you want to log in with your Apple ID, you can directly log in to your phone's previous Apple ID account here. If you don't have the Find My iPhone feature turned on, you can also click on the Create a new ID or skip this step option.

3. After completing the above steps, the phone will ask if you want to add a password and fingerprint recognition function, which can be skipped and set up later. When you complete the activation step, you will see a prompt on the screen to welcome to use the iPhone, which means that the reactivation has been successful, and you can start using it by clicking on it.