What kind of heating method is suitable for a 100 square meter house?

Milan spring tips: There are two ways to heat your home in winter, radiators and floor heating, let me talk about the difference between radiators and floor heating. Installing underfloor heating or installing radiators - comfort is compared to underfloor heating:

It is currently recognized as the most comfortable and fashionable way to heat. It is heated by low-temperature floor heating, which is "warm and cool", warm and comfortable under the feet, suitable for human body temperature needs; The temperature is balanced, the heat dissipation is uniform, there is no sense of wind, it is not easy to produce floating dust, no noise, and it is hygienic and environmentally friendly. Radiators:

It is a type of heating based on convection. The radiator first heats the air around it, so that the air forms a convection flow in the room to achieve the purpose of heating. This heating method is that the temperature around the radiator is high, with the increase of the distance from the radiator, the temperature decreases, and the temperature difference at the same level is larger, this phenomenon is especially obvious in the large space room, and the comfort is relatively poor.

Installing floor heating or installing radiators - the heating rate is more than floor heating: Anyone who has used floor heating knows that floor heating is slower and generally needs to be turned on 24 hours a day to achieve the best comfort. The reason is that the floor heating uses low-temperature hot water radiation, which dissipates heat slowly, and requires a certain process to heat the room.

Radiator: The heating rate far exceeds that of floor heating, generally open the radiator for about half an hour, you can feel the warmth, and there is no need for long-term heating, you can turn it off at any time, suitable for office workers. Installing underfloor heating or installing radiators - energy-saving comparison of underfloor heating:

Although underfloor heating needs to be heated throughout the day to ensure a balanced temperature, it is much more energy-efficient than radiators. This is mainly because the floor heating adopts low-temperature radiant heat dissipation, and the floor heating has the function of temperature control and temperature regulation, although the opening time is long, but the power consumption is small. Radiators:

The radiator belongs to the air convection heat dissipation, the water temperature is required to reach a certain height, and the radiator has no temperature control device, and the circulation heating must be carried out after the hot water is cooled, so the loss of energy is higher than the floor heating 30, and in the degree of energy saving, the floor heating has an obvious advantage. Installing floor heating or installing radiators - installation convenience is more than floor heating: floor heating is a hidden project, the amount of work is huge, especially the laying of floor heating pipes should be very careful, to avoid the huge catastrophe of water leakage in the later stage, and only the rough house can install floor heating.

Radiator: There are two ways of radiator installation, surface installation and concealed installation, and both methods of blank room can be used. The concealed pipeline is hidden, the construction is slightly complicated, and the house that has been renovated can only choose the surface-mounted installation method, and the open-mounted pipeline is walked, and the construction period is short, convenient and fast.

Installing floor heating or installing radiators - installation ** relatively speaking, radiators ** are cheaper than floor heating**, not only the cost is less when buying, but also when installing later, floor heating takes more time than heating, in general, the installation of radiators, Milan spring is a very good manufacturer, as the top ten well-known brands of radiators, is a very trustworthy manufacturer.

A 100-square-meter house is enough to install several sets of mask-type finned tube radiators. Mask finned tube radiator is a kind of high-efficiency and energy-saving radiator, which is mainly used in the fields of air conditioning system, electrical equipment and mechanical equipment. It is made of special materials and has excellent corrosion resistance and aesthetics.

It can realize the rapid conduction and dissipation of a large amount of heat, effectively reduce the temperature and noise of the equipment, and improve the stability and life of the equipment.

Mask finned tube radiator.

In addition, the mask finned tube radiator also has the characteristics of energy saving and environmental protection, which can reduce energy consumption and carbon dioxide emissions in long-term use, which is in line with the pursuit of green environmental protection in modern society. The mask finned tube radiator has a simple structure, is easy to install and maintain, and can be designed and customized according to different usage conditions and requirements. It is widely used in industrial, medical, transportation and other fields, such as wind power generator sets, substation equipment, electronic products, air purifiers, etc.

Mask finned tube radiator.

With the continuous development of science and technology and the expansion of the scope of application, the mask finned tube radiator will continue to improve its efficiency and stability, and become the preferred radiator for more industries. At the same time, we should also strengthen the research and development of radiators, and continue to introduce more advanced and applicable products, so as to contribute to the sustainable development of social economy.

Mask finned tube radiator.

For a two-bedroom apartment with a floor area of 100 square meters, the indoor temperature is 16 degrees Celsius, and if you choose air conditioning for heating, you need to install three air conditioners in your home to meet the heating needs. According to the calculation of 15 hours of operation per day, the daily power consumption of 3 air conditioners is nearly 70 kilowatt hours when turned on at the same time, and the heating cost of a winter needs to be calculated according to 4 months (November to February of the following year), and the heating cost is nearly 90 30 4 yuan.

What is the most cost-effective way to heat - gas wall-hung boiler.

Suppose there is no one at home during the day and live at night (excluding the case of long-term non-occupancy of the house). To reach the indoor temperature of 16 degrees as the standard, according to the calculation, take the gas heating furnace heating average per hour to consume cubic meters of gas, the current gas fee is yuan cubic meters, to burn 15 hours a day, it costs yuan per month, a winter heating cost needs to be calculated according to 4 months (November to February of the following year), then the cost is 2394 yuan.

What is the most cost-effective way to heat - radiators.

The biggest feature of the radiator is that it is efficient, it heats up when it is opened, and in addition, the radiator can be surface-mounted, not affected by the floor, and can also bake clothes, which is very suitable for young people with a fast-paced life. The initial installation cost of radiators is between 2-30,000 yuan, and a 100-square-meter house needs 80 90 columns of radiators, ranging from 120 to 500 yuan per column; The main pipe, branch pipe and valve and other accessories in the material plus the installation fee is about 6,000 yuan. The gas consumption of a 100-square-meter house per hour in operation is cubic meters, and it is 23 cubic meters for 10 hours a day, which is around 2,000 yuan a month according to the current Wuhan gas fee standard.

What is the most cost-effective way to heat - electric heating film.

Compared with other heating methods, electric film heating is a new type of heating method. Reliable electric heating films are sold at between 120 yuan and 180 yuan per square meter. Generally speaking, a 100-square-meter house, excluding the kitchen, bathroom, etc., has an actual laying area of about 80 square meters, and the initial installation cost is about 10,000 yuan according to the market price of 120 yuan.

If the indoor temperature is required to maintain a constant temperature of 18, the heating time is 6 to 8 hours sufficient, according to the maximum consumption of 5 kilowatt-hours of electricity, about 35 kilowatt-hours of electricity a day, according to the calculation of each kilowatt-hour of electricity, a maximum of 21 yuan a day, the monthly expenditure is about 600 yuan, a heating season is calculated according to 4 months, you need to pay 2400 yuan. In fact, the general operating cost of electric heating film is 2200 to 2400 yuan.

What is the most cost-effective way to save money, to sum up, the effect and cost of gas wall-hung boiler heating is the best way in terms of cost performance. Starting from personal characteristics and hobbies, the gas wall-hung boiler can be equipped with various heat dissipation equipment to realize the dual enjoyment of home heating and domestic hot water; If it is connected with a radiator, the temperature is stable when used, which is economical and popular; Equipped with radiant floor heating, you can get a more comfortable working and living environment.

It is best to be able to connect the heat network, water heating is the best, electricity is relatively dry and not good for the body, if there is no heat network, you can buy a boiler to do plumbing, not the kind of coal burning, very beautiful and very small do not occupy much space. There is also a heater that burns liquefied gas, which is the most economical.

It is best to use the earth heater of the stove for the house without insulation in the Northeast, and use the superconducting radiator sheet, the effect can be satisfied, the cost is low, the coal in the Northeast is very cheap, and the electric heating design power is high and the temperature can be, and the cost will be high. The most economical temperature can be satisfied is the former.

When building a building in the north, the floor heating will be laid for you, if not, you can also hang the heating yourself, you just need to pay the heating bill. It's warm in the winter.

Electric heaters. This is very practical, if you want to use it, plug it in, and the power can be adjusted.

You dare to live in such a house???

How much does it cost to heat the air? The cost is mainly divided into hosting cost and installation cost.

Whether it is 100 square meters or 200 square meters, or a villa, the first thing that needs to be considered is the heating area, and after the area is determined, the corresponding host can be configured.

According to conventional calculations, the heating heat load per square meter is about 60W, and the 60-square-meter house is equipped with 3 horsepower air source heat pump hosts, 100-square-meter houses are equipped with 5 horsepower air source heat pump hosts, 120-square-meter houses are equipped with 6-horse air source heat pump hosts, 150-square-meter houses are equipped with 8-horse air source heat pump hosts, 200-square-meter houses are equipped with 10 horsepower air source heat pump hosts, and so on.

Taking 100 square meters of heating area as an example, for energy-saving buildings south of the Yangtze River, 3 horsepower air energy hosts are enough, **8000 or so; If it is a non-energy-saving building and energy-saving floor heating, it needs 5 horsepower air energy hosts, **13,000 yuan; If it is a non-energy-saving building or non-energy-saving floor heating, it needs 6 hp air energy host, which costs 15,000 yuan; In the north of the Yangtze River, different regions can be configured with 5 to 6 horses host, **13000 15000 yuan, under normal circumstances, 150 square meters of house is recommended to install 8 horses of air heating host, the host ** in about 18000 yuan.

In terms of usage fees, the radiator "floor heating" fan coil depends on the outdoor temperature of the area, the building envelope (thermal insulation and non-thermal insulation), the end configuration, etc.

Once the host is configured, all that remains is the device installation.

The installation of air heating equipment is based on different regions, there is a little floating, at present, an air source heat pump 6 horsepower host is about 15,000, and other auxiliary materials are about 100 yuan per square meter, and the labor cost will be different according to different regions, and the labor cost is about 8,000 yuan. To install an air heating device for a 100-square-meter house, it takes 30,000 yuan to keep it.

It is worth noting that the hot water pipes and logistics transportation costs required for household air source heat pumps vary, depending on the distance between the place of shipment of the air source manufacturer and the location of the installation user. Since most of the houses are self-built houses or residential commercial houses, it is recommended that an experienced engineering contractor with engineering cases be responsible for installation and commissioning. In the north, Jin Ruiguang air energy heating equipment is deeply loved by consumers, and it is also relatively moderate, the factory is located in Yanjiao, Hebei, and the manufacturer provides door-to-door installation and commissioning.

1.Coal-fired stoves for domestic use should not be installed in bedrooms or rooms directly connected to bedrooms to prevent gas poisoning.

2.A pressure reducing pipe should be installed at the outlet of the household coal-fired heating furnace. Its diameter should not be less than the diameter of the pipe.

3.The water inlet and outlet are connected by a live connection for easy maintenance.

4.The slope of the main pipe should be 100:1 in the horizontal case, which is conducive to exhausting.

5.The highest part of the water supply pipe of the household coal-fired heating furnace should not be higher than 6 meters of the furnace return port, otherwise it will lead to excessive pressure and deformation of the protective body.

6.An expansion tank needs to be installed in the system, and the height of the tank should be more than 250mm from the highest point in the system.

7.It is strictly forbidden to install valves on pressure reducing pipes, exhaust pipes, and water supply tanks, otherwise it is very dangerous.

8.The height of the center of the radiator should be more than 300mm higher than the center of the inlet and outlet of the furnace body, the higher the better, which is conducive to circulation.

9.When the circulation is not good due to non-obstructive reasons such as too long pipelines, the position difference between the household coal-fired heating stove and the radiator can also be further increased to promote water circulation, otherwise a small hot water pipeline pump should be added to force water circulation. Do not install the pump on the lower horizontal main to push water to the furnace, as the pressure of the pump will swell the stove.

10.Vertical chimney height: briquette furnace should be more than two meters, loose coal furnace must use a diameter of 120mm chimney, should be more than four meters, through the sky chimney to add a cap, in summer do not need to remove the chimney, violators of this provision, not within the scope of warranty, the horizontal chimney should be short, the elbow should be less, the windward chimney should be added tee.