Some questions about the flute, what is the flute made of

1.There are six hole flute and eight hole flute, which are divided into two categories: six-hole flute and eight-hole flute according to the number of sound holes. The sound holes of the six-hole flute are the first five and the last one, and the eight-hole flute is the first seven and the last one. The eight-hole flute is a product of modern improvements.

Classification: Qin flute: The diameter is slightly thinner than that of the dong flute, one or eight sound holes before and after opening, and the volume is smaller than that of the dong flute, which is usually used to play with the guqin.

Jade screen flute: This kind of flute volume is smaller, and the outside of the flute is sometimes carved with dragons and phoenixes, which is generally used for self-entertainment or as a handicraft.

The purple bamboo flute and the nine-section flute are also good.

Modern eight-hole flute.

Suggested use: Modern eight-hole flute.

Modern Eight-Hole Flute]: Now there is an eight-hole flute, the pipe diameter adopts the size of the hole flute, and the sound hole has eight sound holes like the piano flute, which is called the eight-hole flute, and the blowing method is exactly the same as the six-hole flute (traditional hole flute), only slightly different in fingering. The advantages of this eight-hole flute are:

The volume is loud, the modulation is convenient, and it is suitable for solo playing. It is generally most commonly used in art schools.

The tone of the flute is different, the common one is G key, as well as F tone, C tone, etc.

2.You can order it online, beginners can buy less than 100, I bought ** that 69 flute, the eight-hole G tone looks simple and simple, very good.

Specifically, you can also go to the Xiao bar to have a look.

If you are interested in Xiao, you can go to the [Xiao Bar] and [Xiao Yaji Forum] to visit, there are many masters in it, I believe you will definitely gain something.

1. Flutes can be divided into many categories according to material, origin, process, etc. Under normal circumstances, they are collectively referred to as dong flutes. According to the process, the most common ones are eight-hole and six-hole flutes, of course, there are also seven-hole flutes and so on. Eight holes are recommended for beginners, because there are fewer half-holes when transposing, which is easier to master.

2. If you don't have the help of a teacher, it is recommended to choose a trustworthy manufacturer, because in the absence of a foundation, choosing a brand and reputation can minimize the risk of shopping.

3. There are a lot of textbooks on the Internet. In fact, it is some preliminary music theory, namely: reading music, followed by fingering. These can be found online. It is recommended that the landlord go to the Xiao Yaji forum, because there are many flute masters there, and you can consult them.

Hope it helps the landlord.

The upstairs ones are too detailed. Top one. May I ask upstairs, is the Guizhou Yuping Xiao a famous flute?

Search for "factory direct sales - Guizhou Yuping Xiaodi Factory".Red Bamboo Poetry Shen Xiao "Cai Yuan, such a cheap flute is easy to use." After searching, Guizhou Yuping Xiao seems to be good. Don't know how?

The flute is generally made of wood, but there are also jade flutes and copper flutes, and the common materials are bamboo, wood, jade, stainless steel, and resin. The Xiao is a very ancient Han wind instrument, which has a long history, mellow and soft timbre, quiet and elegant, suitable for solo and ensemble play. According to the number of "sound holes", it is divided into six-hole flute and eight-hole flute, and the six-hole flute is the first five and the last one, and the eight-hole flute is the first seven and the last one.

The eight-hole flute is a product of modern improvements.

The structure of the flute is relatively simple, and it can be made of purple bamboo, yellow withered bamboo, or white bamboo. The sound quality of the flute has a lot to do with the bamboo material selected and the production. It is necessary to choose bamboo harvested from the winter solstice to the spring equinox, and it is better to use old bamboo with a growth period of more than three years.

Bamboo should be solid, heavier, purple bamboo to bamboo flowers uniform, purple-brown is better, no insects, shrinkage, splitting, bee waist and belly and other defects, the tube body is complete, the texture is fine and straight.

There is a lot of attention to detail in the making of the flute. When making, the mouthpiece and sound hole should not necessarily be in a straight line, especially below the E key, and the sound hole should be ergonomically opened according to the more comfortable position of the fingers.

The mouthpiece is round above and below, the sound hole should be round, and all are cut into an inward inclined shape, the hole wall should be smooth, the inner chamber should be smooth and clean, the bamboo is polished, the two ends are flat, the diameter of the two ends can not be too large, and the lacquer decoration should be beautiful. In terms of sound quality, the scale should be accurate, no matter how light or heavy blowing, the sound should be clear and beautiful, and there should be no hollow or differential sound. The timbre should be pure, beautiful, and mellow.

1.Pitch is related to the length of the tube, the length of the tube is low, and the short length of the tube is the pitch. Generally, the effective tube length of the G and F tones is more than 50 centimeters, nearly 60 centimeters.

Therefore, the hole flute with an effective tube length of 60 cm will be lower than the F-tuning flute.

Generally, the effective tube length of the hole flute is more than 50 cm, and the total length is 80 90 cm, and the length of the tail end of the flute has no effect on the pitch. If you say 90 centimeters is the full length of a hole flute, it is only slightly longer; If the effective tube length is 90 cm, it is too long and the blowing sound will be very low.

Generally, the G and F flutes are not high-pitched, and they can play "low" tunes. What's more, the average beginner blows the F-tune hole flute, which is a bit laborious in breath and pitch, and you will not be able to master it if it is 90 cm long, and the flute is so long that the general musical instrument store can't buy it.

You don't have to think about the length of your choice.

2.The Nanguan (also called Nandong Xiao) in the Nanyin of Quanzhou, Fujian Province has bamboo roots, and its blowing hole is V-shaped, and the timbre is rougher than that of the ordinary Dong Xiao; The ordinary hole flute blowhole is U-shaped, and the timbre is more delicate and soft. If it is a hole flute with bamboo roots, it is not available in general musical instrument stores, and most of them are made by some flute friends, except for the appearance and timbre, there is not much difference.

It doesn't matter how long or short the flute is and what it is pitched into. Only the inner diameter will relate.

The most commonly used flutes are G and F tones, and F tones can be used for low points.

But if you have a flute in C key or something, it depends on your height, and not everyone can play it as you like.

The difference in question 2 should lie in the different materials, and the sound quality may be slightly different, and the sound quality of the old bamboo will be better in general.

More than ten years of non-professional veteran friends voiced:

1. Personally, I think the difficulty of fingering is to change the tone, and it should not be difficult for this major to engage in **.

2. The main thing is that the breath must be stable.

3. Lung capacity should be sufficient, this is not negotiable, singing and musical instruments need to be linked to lung capacity, and regular exercise is better.

4. The biggest difficulty in my personal feeling is that the change of high and low tones has a very strong ability to control the breath, and it is accurate. This is not very good for my old man.

5. In fact, Dong Xiao is relatively suitable for girls, because its breath does not need to be very large. Boys have a hard time learning. Because the breath feels very suppressed.

6. As for the length of study, it is difficult to determine. It takes a few months to learn slowly, or even 1-2 years, and ...... fastMy old man should be considered an outlier,—— 2 days! In case of no mistakes, learn in 2 days!

Because my old man is definitely practicing the musical instrument he likes, it is definitely a life-saving practice, and sometimes he even "goes crazy" and faints due to lack of oxygen.

There is a very interesting story about this, at first my old man liked gourd silk, but at that time he didn't know it at all. The musical instrument salesman had to force my old man to try it, and my old face was red when I was forced, and my hands were a little trembling when I held the instrument. Somehow, in an instant, the tune was actually blown.

At that time, even my old man himself was confused. I'm total, I haven't touched a musical instrument at all. After buying it back and playing for less than a week, I went to buy a flute.

Something similar happened again, choking my old man, and then suddenly he blew out the tune. Later, I went back and only practiced for 2 days, and then I learned the dong flute.

A little personal experience, step on it. I guess it's absolutely weird enough on the road to playing musical instruments. Because learning is not practiced, but held.

The flute is bamboo.

The internal bamboo knots should be opened.

Of course, the bamboo used to make the flute will be very straight.

But the interior still has to be milled.

The bamboo joints at the mouthpiece of the newly made flute are generally retained.

Exceptions such as shakuhachi.

The exterior is generally a normal bamboo appearance.

There are also some flutes with peeled bamboo on the outside.

Such as a jade screen flute. Generally, the better flute will be nine sections.

From the mouthpiece to the top finger hole, there are engraved poems and paintings.

The front of the sound hole will have the author's signature.

Some flutes also tie wires to prevent cracking.

For ease of ensemble.

Nowadays, many flutes have copper connections.

It is divided into two sections and three sections.

That is, there is a copper connection and two copper connections.

One copper connection is between the mouthpiece and the top finger hole.

The two copper connections will be above the sound hole of the cylinder tone.

Finger holes are generally divided into six holes and eight holes.

Of course, there are other possibilities.

The third hole in the six-hole flute.

The fourth hole edge of the eight-hole flute.

It will be engraved with the key signature of this flute.

Generally e, f, g, a

F and g are the most common.

That's about it.

Categories: Culture Arts >> Instrumental Music Vocal Music.

Problem description: What is the production principle, what is the timbre, what kind of performance is used, etc., plus the best famous solo piece.

Analysis: Big said, divided into Chinese flute, Japanese flute and so on.

Chinese flute, can be divided into dong flute (north flute), south flute, some ethnic minority flute because it is not commonly used, even whether it should be attributed to the flute is difficult to say, here do not talk about them.

The dong flute seems to be able to contain the qin flute, the qin flute is just a thin pipe, the volume is small, and it can be well matched with the guqin, and the shape is still the same as the dong flute, but some people put this specifically into the category. The jade screen flute can also be regarded as a singular branch of the hole flute, characterized by the fact that the pipe is artificially clamped and flattened to shout Kaitan, the carving process is very exquisite, but the performance is unsatisfactory, the shape of the previous jade screen flute is the same as the hole flute, but now it is also a stubby and short south flute, they have been improving the process, I believe that the future jade screen flute is not just a flute that can only be furnished and can not be blown.

Nan Xiao, also called Zheng Tong big head flute, Taiwan, Guangzhou, Hong Kong is more common, because of the stubby, basically the same as the ancient shakuhachi shape system in the Japanese collection, so some people call this shakuhachi, in fact, it is not right, the Japanese flute is shakuhachi, its inner diameter has a strict size, unlike the general flute, the inner diameter is the inner diameter of natural bamboo. The Nan Xiao is now also the same as the Dong Xiao with 8 holes, while the Japanese Shakuhachi is generally 5 holes. Later, some people made the inner diameter of the Nan Xiao the same as the Japanese shakuhachi, but made the 8 holes of the Nan Xiao, and this Xiao has a name called Taiwan Shakuhachi.

The South Pipe Flute can also be regarded as a branch of the South Pipe, it is specially used to play the South Pipe, except for the rhythm, and the South Flute is no different, when it is set in tone, 7 is set by a lower quarter of a tone, not according to the 12 equal law.

Many people who make flutes in China say that they can do shakuhachi, but it is pure nonsense, and they only make Nanxiao, or 5 holes. At this year's Shanghai Musical Instrument Exhibition, many flute manufacturers displayed the South Flute, and a friend Sun Yuan asked why, the manufacturer replied, this year's popular flute with bamboo roots, fainted!!

The hole flute, about the diameter of the piece, is 60 80 cm long, the traditional is 6 holes, there are also 7 holes, and now there are more than 8 holes. The top is a blowing hole, which is generally a U-shaped mouthpiece, also called a phoenix flute. The diameter of the flute is left and right.

The south flute is also called the big head flute, generally with bamboo roots, the inner wall of the bamboo heel has a spiral diversion groove, the flute body is thick and short, and now it is mostly 8 holes, and the mouthpiece is mostly V-shaped, or UV mouthpiece. The south pipe flute generally requires nine sections and ten meshes. Taiwanese shakuhachi is modeled after the mouthpiece of Japanese shakuhachi, which is an external incision mouthpiece.

Do you mean the H side? If so, then it's naturally a little brother!

Summary. Hello, the standard of a good flute is good timbre, good pitch, and easy to blow.

If you want a good flute, you have to find a friend who can blow and blow well to help you choose. There is basically nothing good about the flute of the piano shop, and the flute of the flute factory is also good and bad, if you order on the ** of the flute factory, the probability of buying a good flute is not very high... So it's best to find a friend who will help you choose.

What makes a good flute?

Hello, the standard of a good flute is good timbre, good pitch, and easy to blow. If you want a good flute, you have to find a friend who can blow and blow well to help you choose. There is basically nothing good about the flute of the piano shop, and the flute of the flute factory is also good and bad, if you order on the ** of the flute factory, the probability of buying a good flute is not very high...

So it's best to find a friend who will help you choose.

Adapt to that. Age blows.

There is no fixed age standard, but you must pay attention to lung capacity and finger length, it is too young to control the airflow, and the fingers are not long enough, so you can start with a short flute. It is recommended to blow after 12 years old.