How to frame cross stitch and how to do cross stitch

It's not realistic to frame it yourself. Not to mention the technical problems, even if you know the framing procedure, but framing requires professional equipment such as corner cutting machines, nail corner machines, cardboard knives, etc., as well as many materials such as wooden lines and cardboards. With this set of things, the investment will definitely not be less.

If you don't use these professional things to do it, just just fool around, the effect is not as good as not framing.

If the amount is not particularly large, it is recommended to go to a professional framing shop for framing, ** will not be very expensive.

Send it to a cross-stitch shop or photo studio. You can help frame it.

It is usually washed and framed. Otherwise. It's okay to buy your own box.

Wash and dry. Ironing smooth. Frame it at the end.

If you want to frame the cross-stitch, you may wish to send it to the cross-stitch shop to let them mount it more exquisitely, and you can also buy some materials or use it as a wood coordinate frame for furniture to the glass market to quickly mark the glass yourself with glue.

Cross-stitch is a great home décor item. Nowadays, cross-stitch embroidery has become a trend, and many people will embroider a few by themselves when they have nothing to do, but how should they be framed after cross-stitching? Next, I will introduce you to the steps of cross-stitch framing.

1. Marquee. 1. When receiving the finished product framing business, the first thing is to go to the local wholesale market for the picture frame, the picture frame wholesale business, looking for the frame suitable for the size of the finished product, the best cross-stitch pattern can be fully expressed in the cardboard.

2. Negotiate with the merchant who sells the frame**.

3. When choosing a cross-stitch clock face pattern, in addition to paying attention to the size, it is also necessary to pay attention to the selection of glass and the bottom plate to have a certain gap, not less than 1 cm, because it is necessary to install the hour hand.

2. Washing and ironing of finished products.

1. Soak the finished product in water for 5 minutes, pour in the general detergent, gently knead and wash, and dry 7 into dry after water.

2. Put the finished product on the ironing board with the back side up, be sure to iron it with a steam iron, and dry the finished product for later use.

3. Mounting. 1. You put the bought frame flat and disassemble the bottom plate from the back, then you need to pull out the fixed nails with needle-nose pliers, and put the nails away and do not throw them away.

2. After disassembling the bottom plate, carefully tear off the painting stuck to it and keep the jammed paper.

3. Put the finished product on the bottom plate, adjust the position, and then brush the paste with a brush, which is 3 yuan and 1 bottle of paste, which is similar to the post office used to paste stamps.

4. After brushing, paste the finished product on it, if you stick the front on the paste, you should hit **.

5. Put the cardboard on the pasted bottom plate to see if the position is appropriate, and then smooth the finished product and exhaust the air inside. When the cross-stitch of the clock face is framed, it is necessary to pay attention to the matching electronic clock components in the absolute middle position, and use a fruit knife to drill the hole in the low plate after finding a good position, and dig the hole well. Don't be reluctant, this is a must, after doing these, paste the embroidery on the low plate with paste, pay attention to the drilled holes to align, and finally go on the low plate after it is completely dry.

6. Put it aside to dry, if you don't dry it, the surface of the finished product will be moldy and green hair.

7. After drying, the frame is loaded, the cardboard is loaded first, and then the bottom plate is installed, and then the nails are ordered according to the original position.

8. It is best to put a circle of paper tape on the back.

Summary. Dear, hello, according to your problem description 1, first run the embroidered cross-stitch in detergent water, and then dry it for later use. 2. Take out the cardboard and wipe the inside and outside of the instrument glass in the frame.

3. Start ironing the cross-stitch cloth after the bath. 4. Ironed, fixed on the back panel of the frame, each person has their own different methods, I saw that the owner of the frame is framed with glue, I use thread to sew on the back board. 5. Wrap the reverse thread with tape to protect the thread from wear.

6. Load the glass, cardboard, fix the back plate in turn, pin the metal around it, fix it, and you're done.

How cross-stitch is framed.

Dear, hello, is answering this question for you, you need to wait patiently for about five minutes, the answer will be revealed for you immediately, please don't worry!

Dear, hello, according to your problem description 1, first run the embroidered cross-stitch in detergent water, and then dry it for later use. 2. Take out the cardboard and wipe the inside and outside of the instrument glass in the frame. 3. Start ironing the cross-stitch cloth after the bath.

4. Ironed, fixed on the back panel of the frame, each person has their own different methods, I saw that the owner of the frame is framed with glue, I use thread to sew on the back board. 5. Wrap the reverse thread with tape to protect the thread from wear. 6. Load the glass, cardboard, fix the back plate in turn, pin the metal around it, fix it, and you're done.