My computer monitor is turned off, and the chassis can t be turned off, what should I do?

Sometimes what should I do if I can't turn off the computer when I turn it off, the following is the content I brought about what happens when the computer monitor can't be turned off, welcome to read!

What happens when my computer monitor doesn't turn off?

1. There is software still running in the background, and you will not be prompted when you shut down. The most common case is that the word process hangs up in the background and does not go away, even if you close the taskbar.

For all the above office software, sometimes the process is still shut down in the background, you need to manually close the background process, press the CTR+ALT+DELETE key combination to open the task manager.

Find the process, right-click, and end the process directly. For any process that is hung with macros, delete the process and shut it down directly.

Second, there is the easiest way, open the start menu, click the log button, go back to the desktop again, and directly click the shutdown button again to shut down.

The computer monitor can't be turned off Solution:

Command: -f is sufficient. This command will completely kill all suspended programs, and all programs running in the background will be closed.

When you return to the desktop again, enter the shutdown -s -t 0 or -s shutdown command to shut down.

Looked"What happens when my computer monitor doesn't turn off? "Article content of peopleAlso look:

1.What's wrong with the computer monitor not turning off.

2.The computer monitor is not automatically turned off.

3.What to do if your computer monitor doesn't show it.

4.What should I do if the computer monitor does not show the screen.

5.What to do if your computer monitor is not full-screen.

6.What should I do if my computer monitor doesn't show up.

7.The monitor does not show the desktop of the computer.

What to do 8What should I do if my computer monitor doesn't produce an image.

9.LCD.

workarounds for common failures.

10.What happens if the computer monitor is not on the screen.

The current display will automatically enter the standby state after there is no ** signal input, and press and hold the power button on the display to wait for the signal light to turn off completely. If the display screen shows a prompt of [Screen Control Lock] and cannot be turned off, you can find the menu key [Menu Delay] in the screen control key, and you can unlock and turn off the screen after long pressing. The details are as follows:

1. The current display will automatically enter the standby state of lack of tease after there is no ** signal input, there may be a [no signal input] prompt on the screen, the signal light will turn yellow or red, the display screen will not automatically turn off, you can press and hold the on/off button of the display again and wait for the signal light to turn off completely;

2. If the [Screen Control Lock] prompt cannot be turned off, you can find a [OK] or other menu key [Menu] and hold the menu key in the place of the screen control key for 5 seconds or 12 seconds until the screen appears [Screen Control Unlock] prompt to turn off the display.

If your computer can't shut down after the signal state is changed, there may be several reasons:

1.Incorrect power cord connection: Check that the power cord is properly connected to the power supply and motherboard.

2.Power failure: Check whether the power supply is working properly, you can try to replace the power supply.

3.Power button fault: Check if the power button is working properly, you can try to replace the power button.

4.Motherboard failure: Check if the motherboard is working properly, you can try to replace the motherboard.

6.Other hardware faults: Check whether other hardware components, such as memory and graphics card, are working properly.

If you are not sure how to solve this problem, it is recommended that you contact a professional computer repair personnel or after-sales service provider for more detailed help and support.

If you are sure that the display is bad, it should be that the keys are not good, if it is not the bad buttons, then the CPU of the motherboard is out of control.

Are you saying the monitor won't power off? To turn off the power is to press the button of the display, the main power is turned off and the power of the monitor is not turned off, or the same power, this is not a problem.

1.The power button is locked, and it can be unlocked by pressing and holding the power button for 10 seconds! With the monitor powered on, press and hold the MENU button for more than 10 seconds to lock the OSD menu function of the indicator or unlock the OSD menu lock function of the display.

2.In the power management, I set the option to turn off the monitor of the monitor to ask the questioner.

3.Screen buttons are stuck or something.

1. If it is safe to turn off the computer and does not automatically turn off the power, there is no power support, click "Start Settings Control Panel Power Options".

High Energy Power Management" and select "Enable advanced power management support". It is also possible that the BIOS settings are incorrect, please go to the BIOS and modify the power management options in the BIOS.

2. Anti-virus software conflicts. Some anti-virus software conflicts with XP, before shutting down the anti-virus software real-time monitoring and disabling, and then close the system tray residency program, and then shut down if the problem is solved, it is an anti-virus software problem.

3. Memory residency program. As with anti-virus software conflicts, close the software residing on your system before shutting down your system to find out which programs are affecting the shutdown.

4. Viral infection. There are many viruses that are constantly replicating themselves in the system, and the solution is antivirus (safe mode).

Is it because the computer's host can't be turned off, or is it because the monitor itself can't be turned off? If the display itself can't be turned off, it's either a mechanical failure, a button failure, or a broken inductive switch. If the host can't be shut down, most of them are system problems, whether they are infected with viruses, or the system files are damaged, back up the main data, and it's OK to do the system from the beginning.

It's not that it can't be turned off, it's that after it's turned off, it's still on when the power is turned on, right?

Some brands of monitors are set up like this: The host unit will automatically turn on when it is powered on.

It doesn't make a difference, don't worry.