How the XEROX printer corrects the print head

Method steps.

6 7 Step by Step Reading.

Printhead calibration operation steps:1Preparation: Four sheets of A4 paper; The printer's power supply is well connected.

Go to the printhead calibration settings: Make sure the printer is turned off (when using continuous paper, make sure the paper is loaded and the printer is turned off). While holding down the pause button, turn on the printer.

The printer's paper out and pause lights are on. Enter"Grass"Printhead calibration in mode: Put in the printing paper, print out the printhead calibration instructions and the calibration pattern in cursive mode, indicating that it has entered"Grass"calibration mode;

Select the number of the calibration pattern: From"Calibration pattern in Grass mode"on your Mac, find the drawing type with the straightest vertical line according to the printing effect. For example:

It can be seen that the printing effect is better; Printhead calibration: At this time, the light is on, you need to put in a piece of paper first, and then use the Wrap button to adjust the font indicator to the state shown in the "Printhead Calibration Instructions". For example:

Calibrate according to the pattern, and use the line break button to adjust the font indicator to the "bright, bright, bright" state.

Enter"Kanji high-speed"Print head calibration mode: Press the font key and the printer will print out"Calibration pattern in Kanji high-speed mode"to indicate that it has entered"Kanji high-speed"calibration mode;

Select the pattern number of the print head calibration: for example: the printing effect is better; Printhead calibration:

Insert a piece of paper, and use the Wrap Button to adjust the font indicator to the state shown in the "Printhead Calibration Instructions". For example, the state of the font light is "on and off".

Enter"Letter quality"Print head calibration in mode: Press the font key to print out"Calibration pattern in letter quality mode"to indicate that it has entered"Letter quality"calibration mode;

Select the pattern number of the print head calibration: for example: the printing effect is better; Printhead calibration:

Use the Wrap button to adjust the font indicator to the state shown in the "Printhead Calibration Instructions". For example, the state of the font light is "on and off".

Press the font key to log in to the settings, and after the printer is turned off, the calibration settings take effect.

Adjusted print results.

Precautions. If there is still no effect after adjustment, it is recommended to contact an Epson authorized service center for professional repair.

Find a professional maintenance worker.

I really don't know what the printhead you are talking about.

The laser machine does not have a print head!

If the printing effect is not good, change the drum.

Laser machines don't have a print head! What does the machine prompt?

With the development of science and technology, printers are spread all over large, medium and small enterprises, and printers facilitate customers' office and improve office efficiency. However, in the process of office, there will be various problems, such as the printer cannot be used, etc., for these problems, Fuji Xerox maintenance staff summarized the following methods for everyone.

2. Smudges will appear when printing: If the inkjet printer is smudged when printing because the ink tank or ink tube is damaged, it needs to be replaced with a new one; If the nozzle performance is not good or the ink cannot be in a balanced state when spraying, there will also be ink leakage, just adjust or add ink, and it can be solved by yourself.

3. When printing, the print head will move or be blocked and vibrate in place: the print head will be blocked because the track of the print head will become dry because it slides for a long time, and it will stop printing to a certain extent, and if it is not dealt with in time, it will cause the drive circuit to burn out.

The printer does not need to be set up, mainly set on the printing software, as shown in the figure, when using the barcode printing software to print, on the printing settings page, you need to set the number of labels, the start page number and the end page number, etc., after the setting, you can connect to the printer for printing.

1 First of all, we click the Microsoft button in the lower left corner of the computer, the pop-up interface, we click Settings;

2 The interface that pops up and we click on the device;

3 pop-up interface, we click on the printer and scanner;

4 After that we click on the printer we connected, the interface that pops up, we click on Manage;

5 The pop-up interface, we click "Print Test Page" to print.

Press the [MENU] button on the control panel.

Use the [Up] and [Down] arrow buttons to display the "Report List".

Press the [Right] arrow button to accept the selection.

Use the [Up] and [Down] arrow buttons to select the report you want to print from the following list:

Job History

Error History, Print Meter, Printer Settings, Panel Settings, Font List

PCL font list, User defined, PCL macro list, ESC P Logical (ESC P logical), and press the [Eject set] button to print.

Press and hold the pause button for 5 seconds The machine comes with a self-test page.

All printers are looking for print preferences inside the properties and printing test pages.

When you install the printer driver, you can print the test...

Are you adjusting? What are the printer settings on your computer? Page settings in document tools such as Word? Or is it adjusted on the panel of the printer itself?

What model of printer?

It is recommended to adjust the printer settings of the computer, and the printer itself maintains the default portrait orientation, so that you can flexibly grasp the landscape or portrait when printing different documents.

If the printer has been adjusted to landscape orientation, it needs to be adjusted back to default or portrait orientation from the printer panel before the computer can control the o

Printer drivers under Windows are usually divided into GDI printer drivers, PCL printer drivers, and Postscript (PS) printer drivers. GDI driver: Usually the data format generated by the GDI printer driver is formulated by the printer manufacturer, and GDI printers from different manufacturers are not compatible.

PCL Driver: PCL printers are designed according to HP's print control language standard, and the data generated by the print driver meets this standard, so printers from different manufacturers can be compatible with the basic printing tasks generated by the PCL print driver. The PCL language is a printer page description language introduced by HP in the 70s for its laser printer products.

PCL instructions are embedded in the print data stream and quickly translate application output into high-quality, device-specific rasterized images. Printers using PCL language have a very obvious speed advantage when processing text or documents under some common office application software, and are more suitable for some ordinary business office applications. Postscript driver:

The data generated by the PostScript printer driver conforms to the Postscript standard of Adobe Systems, which can be printed by printers with Postscript processing, and it can also be processed by many Adobe software such as Acrobat, Photoshop, etc.

2. Cause analysis:

The above phenomena are mainly due to the following reasons:

1. Most of them are caused by the blockage of the nozzle of the print head.

2. When installing the new cartridge, the yellow tape is not completely removed.

3. The ink cartridge has exceeded its expiration date.

4. The printer has a hardware failure.

3. Solution:

Steps. 1. Try to use a nozzle inspection tool to detect whether the nozzle is blocked.

1. Turn on the power of the printer and load the A4 paper in the printer feeder.

2. Enter the "Maintenance" window in the driver

For Windows 98 Me users:

Select "Start" - > Settings - > Printer", right-click the printer icon, and select "Properties" - >Maintenance".

For Windows 2000 XP Vista users:

Select "Start" - >Control Panel - > Printers" or "Print & Fax", right-click the printer icon, and select "Printing Preferences" - >Maintenance".

3. Select "Nozzle Check", select "Print" according to the on-screen prompts, and the printer will print out the nozzle check sample;

4. If the printed nozzle check pattern is missing color or broken line, please select the "Print Head Cleaning" button to clean the print head, as shown in Figure (4). During the cleaning process, when the power indicator stops flashing, it indicates that the print head cleaning operation is complete.