Enterprise Control Innovation Method 10, Enterprise Control Innovation Method

First of all, the supplier must meet the various qualification requirements stated in the bidding documents issued by the procurement center before registering for bidding.

**After successfully registering for bidding, you can receive the bidding documents, which have specific technical parameters and service requirements, etc.;

Then, the procurement center will formulate scoring criteria based on the specific goods or projects purchased by the purchaser.

The bid evaluation for general goods is divided into 3 parts:

Technical part: mainly from energy saving and environmental protection, manufacturing process, reasonable structure, safety and reliability, comprehensive performance, stable operation, easy operation and other conditions. The score in this section is relatively high, generally accounting for about 30%-50% of the full score.

Business**: That is, through the average value of all bidders' bids as the basic price, the method of calculating the difference between each bidder is scored, and the specific calculation method is different in different places. The score in this section is very high, generally accounting for about 50%-70% of the full score.

Enterprise sales performance and after-sales service: that is, the number of contracts for similar products signed by the enterprise in recent years, and the company's personnel training and after-sales service commitment to the goods to be installed. The score in this section is generally not high, usually less than 10% of the full score.

The general engineering bid evaluation is also divided into these three parts:

Technical part: mainly from the construction organization design, construction general layout plan, schedule and engineering quality assurance measures, key construction technology technology, staffing, labor and material input plan, wire, equipment performance and other conditions are scored.

Business**: Same as general cargo.

Enterprise sales performance and after-sales service: the same as general goods. Score percentages are the same as above.

Absolutely correct, don't forget to give full marks, and it is a traditional Chinese virtue to give full marks if you are satisfied with your questions. ）

First of all, the tender must respond to the bidding documents, and then do a good job in the relationship between Party A is the most important, understand who participates in the evaluation, if Party A participates in the joint evaluation of the bid with the social expert group, or Party A, the expert group is based on Party A's attitude as the first reference factor.

First, you have to have a good relationship with the tendering party first, and you set the bidding documents.

2. Control the number of bidding companies and set up obstacles in terms of qualifications and registered capital.

3. Set technical requirements according to their own products to better meet their own company.

Fourth, it can cooperate with other companies to control the standard.

The exact details of the operation are subject to availability.

How to seal the label ? It's very simple, the specific requirements are to see if the bidding documents are required, such as two copies of the copy, etc., these specific reference to the bidding documents, the bidding is done, the company directly seals the label, the cover is sealed, and it is on the line, remember the gram disc or U disk, or find a professional sealing company, the specific sealing method conforms to the bidding documents, and the supplementary sealed bidding document is covered with what legal person seal??? That has been directly wrapped in the seal paper What legal person seal is still stamped, just the official seal The cover is written on a certain year, a certain month, a certain day, and a certain time before the cover can not be opened The junction of the seal and the seal paper is covered on the line, a few corners are covered, it is more beautiful, there are no strict requirements!

Then you can open the bid with a hand-held piece You don't need to understand these things The company's people naturally know how to do it I guess you are affiliated with the company If the cost of sealing the company is too expensive, find a sealing company yourself and do it directly for you You only need to bring it to the seal! Finally, I wish you a smooth victory!

Sealing is for bidding, bidding before the bidding deadline, your bidding is packed, sealed in the bag, affixed with seals, this process is sealing. This is addressed to bidders.

For the tenderer, if there is a bid bottom, then before the bid is opened, the bid bottom should be packed in a sealed bag and sealed, which can also be called sealing. It is to seal the tender and open it again when the bid is opened.

After sealing, the two ends of each side are stamped with the official seal, and the middle part is stamped with the legal seal, and the reverse and front sides are the same. If you want to ask how many chapters, it is not a total of 2 sides, 1 mouth, both ends are the official seal, the middle is the legal person chapter, the front four official seals, three legal person chapters, the reverse is still!

Exercises for ball control:

1. Cross-dribbling, 200 times a day;

2. Dribble with both left and right hands, 200 times a day;

3. Dribble the ball behind and under the crotch, 100 times a day.

Assist practice:

1. Use some props to complete the exercises, such as the props in the All-Star Skills Competition, 100 times a day;

2. Get help from your teammates and pass the ball to each other 100 times.

These are all basic trainings, and as a point guard, your defensive ability and physical fitness also need to be trained;

Defensive ability: Tie your feet with rubber straps and walk them into a horse for sliding exercises;

The study of the passing route, the study of the route of the opposing player's pass, to get to the defensive position in advance.

Physical fitness: The basic physical fitness exercises are push-ups, sit-ups, dumbbells and bench presses, and of course, running, and so on.

The most important thing is to insist on exercise and practice, and see your own shortcomings in practice.

Dribble quickly When you're going to dash forward with the ball, of course, dribble quickly. At this time, you should also lean forward and pat the ball slightly forward, dribbling slightly higher between your chest and waist. The body is facing the direction of movement, and the eyes are looking at the whole field.

Variable Speed Dribbling Dribbles Dribbles can be used to break through the opponent's defense (of course, sudden changes of direction or other feints). Variable speed dribbling requires changing the dribble height in addition to changing the speed of the dribble. Approach your opponent with a small stride, then suddenly accelerate (and stride length) and bring the dribble down to the knee level for a quick breakaway.

Variable speed dribbling requires a lot of practice to use effectively.

zhangjingbo_12

hello : landlord please take a look at this ! This is what I have kept for a long time and I will share it with you today.

pte☆☆⊕

To put it simply, buy cabbage.

Policy: I want to buy cabbage!

Goal: I want to buy a cabbage that is always gray and delicious!

Then start to implement the goal, first ask experienced people, what kind of cabbage is delicious, and then tell you, green, big, no yellow leaves, and tell you how to choose.

Then in order to buy good cabbage, you have to be early, so you have to prepare an alarm clock, go to the market, prepare a bicycle, buy a lot and board a car, in order not to be pitted, you must prepare a scale, the myopic should prepare glasses, and most importantly, take a small note and write down what kind of cabbage is good, how to pick (work instructions), these are the planning

The quality assurance stage is over: then go to the market to pick cabbage, pay attention to it when picking, yellow, dry leaves, all do not (quality inspection).

Quality improvement: Go home and take a look, it's all over The cabbage I bought back is fine on the outside, but it is full of insect eyes, and I can't eat it, and then I take it back with a snort, find a profiteer to settle accounts, and change the cabbage!

It's easy to change it back, and I have experience, so the next time I buy it, I want to see if it's good (continuous improvement).

Okay, it's wordy for a long time, and you don't give a bounty point! Hmph

It is explained that in order to pursue excellent quality, we must rely on technological innovation;

Second, quality improvement is endless, only continuous improvement, in order to create high-quality products.

The quality policy is the direction and general principle of a company to do quality!

Is it stated in the quality objectives? It is necessary to quantify the assessment indicators, such as excellent quality, how much is the pass rate, how much is the rate of excellent products, how many technological innovations, how many new technologies are applied, and so on.

The description must mention the meaning of customer satisfaction and continuous improvement!

Single-piece calculation, self-made parts, outsourcing parts, standard parts, purchased parts, one by one statistics, equipment installation man-hours, commissioning man-hours, test hours, painting, packaging, etc. are counted, but also to add enterprise operating costs, employee wages, etc., statistics can be used electronically, very easy to use.

Cost + company expenses + profit (30% out of 100).

One layer and three layers with one duplex.

The second layer is double-tapped.

It's simple. However, it is necessary to pay attention to the requirements of the leakage switch and the independence of the neutral live wire.