What should I do if the Apple 6 screen is broken, can the Apple 6 screen still work normally if it i

1. The mobile phone has been dropped, bumped, or used for many years. may cause damage to the phone cable. It is recommended to send it to a mobile phone store or after-sales maintenance to replace it with a new mobile phone cable.

2. It may be due to water or bumps that cause the screen in the mobile phone to be broken. It is recommended to send it to a mobile phone store or after-sales repair to replace it with a new screen in the phone.

3. There may be a problem with the current system firmware of the Apple phone. It is recommended to redo the system firmware of the mobile phone, or update and upgrade the new version of the system.

4. It is recommended to bring the equipment to the after-sales center for maintenance and processing, and the service fee will be waived for online appointment.

Hello,Generally as long as the motherboard and the display screen are fine, there won't be much of a problem.,My 5s also dropped half of the screen face down last time.,Press it hard and wipe it back.,It's okay now.。 Thank you.

If the screen is broken and the following two conditions are met, the external screen can be replaced separately.

The LCD display of the mobile phone is normal, and the screen does not appear discolored or disconnected.

The touch of the mobile phone is completely normal, and dragging any icon on the mobile phone desktop can smoothly slide across the whole screen without dead ends.

Because replacing the outer screen needs to go through a series of operation processes such as screen removal, separation, glue removal, and lamination, and the entire operation process must be operated in a dust-free environment.

It is recommended that you bring your phone to an Apple Customer Service Center for repair.

You can change it, just find a professional person to change the screen.

Then this can only be changed, and other questions can't be helped.

The touch screen is cracked, you can use it and continue to use it, the current capacitive screen mobile phone is not the previous resistive screen mobile phone, as long as your electronic aggregation layer and capacitor wiring are not problematic, the outer scratch resistant layer is broken has no effect. After a long time, there will be no major problems. Because Apple uses the GGF fully laminated screen, that is, the touch screen and the screen are together, and they can't be removed, and they have to be replaced with a dead set of assembly.

The ** of 4 and 4s is not expensive, and 5 is very expensive. I hope mine is helpful to you, and you can follow up if you have any questions.

I don't want to change this when this means that it is broken.

After the screen is broken, you can use it in the normal way to see if the screen can still be used normally. If it can be used normally, it will not matter.

The mobile phone looks at whether the screen is reflected, and if it is not reflected, the mobile phone can be used normally if it is taken to the after-sales service to change to a new screen.

If the screen is broken, there are generally the following two situations.

In the first case, the glass of the outer screen is broken, and the touch function and display are completely normal. As long as this situation is satisfied, you only need to replace the external screen touch separately. However, this is a factory-level processing process, and it cannot be replaced by after-sales and general repair shops.

The second situation is the inner screen LCD, or the touch layer is damaged. This can cause functional impairment, such as not being able to display, such as not being able to touch. In this case, the entire internal and external screens have to be integrated and replaced.

There is no way to fix it. It is the so-called replacement of the original display.

If the outer screen is broken, it is just a piece of glass, and if the inner screen is broken, there will be some that cannot be displayed, and there will be some liquid on the screen.

Apple 6 is divided into broken outer screen or broken inner screen. If only the tempered layer of the outer screen is broken, the image displayed on the screen is normal, no discoloration, and the touch function is normal.

1.The outer screen is actually a protective case for the inner screen. Generally speaking, if the mobile phone is a touch screen, its screen is composed of two parts: the touch screen and the display screen, the touch screen is its outer screen, and the display screen responsible for display is the inner screen.

2.If the phone is not a touch screen, then there is a transparent "glass" on the outside of the display that protects the display, which is the outer screen, and the display is the inner screen.

3.At present, mobile phones have two screens, an inner screen, an outer screen, the inner screen is not visible, usually protected by an external screen, the inner screen is a monitor, and the outer screen is to protect the inner screen.

The whole country is jointly insured, do you have a fall insurance? No after-sales will cost you money, you can have your local authorized after-sales service.

Dear, Honor 7 Telecom 4G version screen repair reference price 575, the above ** for the replacement of spare parts ** (excluding labor costs), I wish you a happy life. Glory7 is broken,But it can still be used normally,How much does it cost to change the screen,The screen will be considered artificial after the screen is dropped,No free warranty is given,And the screen is replaced**Very high,Generally, it is about 900 yuan。

The stripe pattern on the screen is a broken wire phenomenon, and the screen assembly needs to be replaced.

Then if you want to change the screen, this**will be expensive, this** is really very expensive, this is really expensive, this one costs seven or eight hundred yuan.

Hello, if you can't adapt to it, go to the local after-sales service center to replace the original screen, and the replacement of the screen ** is subject to the replacement of the local after-sales service center.

Obviously, the touch screen (the outer layer) is broken, and it is also possible that the interface circuit and control chip related to the touch screen are broken or the cable connector is falling off, which has to be professionally repaired and checked.

Hello, I'm the screen replacement technical support. I can't tell exactly what your description is. Let's subdivide the screen structure for the time being, the total achievement of the screen is the integration of the internal and external screens, and it is a finished product, which can be directly installed and used.

From the perspective of subdivision, the outermost layer of the screen is tempered glass, and then the surrounding milky white and thin plastic part is the bracket to play a supporting role, and the outer screen glass is laminated to the inner screen through the inherent actinic technology colloidal treatment, and the inner screen is divided into touch and liquid crystal, with wires and liquid crystal IC on it, which is glassy. There is a layer of reflective paper at the bottom layer, which is what we often call backlight.

In fact, the broken screen is divided into two situations, but different situations need to be dealt with accordingly.

The first type: the outer screen is broken, and the touch function and display are completely normal. In this case, you are lucky, as long as you replace the external screen separately.

However, due to technical limitations, replacing the outer screen requires professional equipment and technology, and an independent dust removal workshop can replace it. I have also been to the after-sales service before, and I learned that if the after-sales screen is broken, it needs to be returned to the factory, which takes 12 working days, that is, half a month, and weekends are not considered working days. It takes a long time, and the data needs to be backed up, about 1100.

In fact, in this case, you just need to replace the outer screen separately, and it can be replaced within 1-2 days. The original exterior screen is made of tempered glass produced by Corning, but the replacement requires professional equipment and technology, and even different degrees of experience and technology will affect the effect of replacing the exterior screen. It is recommended to choose the original outer screen.

The second is that the LCD or touch function of the inner screen is abnormal. In this case, the entire internal and external screens must be integrated and replaced.

There are no two. In this case, it is also necessary to return to the factory after repair. However, it only takes 10 minutes to install and change the screen, and then do other basic function tests.

Do I need to change the inner screen if my touch and display functions are completely normal?

Buy another one, don't you have a lot of money, and you don't need the domestic one yet.