In the same system, how is the boot scroll bar different

Your hard drive is slow, don't ask about this kind of normal thing.

Why did you spend 200,000 yuan to marry a wife, and someone else took a wife and earned 20w, but your wife didn't recognize him well? Something doesn't make sense.

The POST speed can be adjusted by BIOS.

This has nothing to do with configuration.

With 128, you can enter the system after 1 turn.

The two upstairs are pure mallets.

If your computer has more software installed, the computer will test more when you boot it, and it will naturally be slow.

It's nothing like the same configuration, the same hardware, the same brand, with the same system disk, boot is not necessarily the same.

You turn off all the IDE detection ports that you don't use, in fact, it's just a psychological effect, and when you use it, the scroll bar will be less, and the scroll bar is not in the system self-test, but just in reading the information that Windows self-test is to start detecting the hardware.

Optimized some useless boot software, turned off all the inapplicable IDE channels, and turned off a lot of useless boot detection in the BIOS.

This is because the configuration of the motherboard of each machine is different! If you want to boot up faster, then I'll teach you some aspects, follow my method to make sure your computer boots up as fast as possible! If you feel good after using it, please give it points!!

First of all, open "System Properties" (right-click - Properties on my computer, or open "System" in the control panel, shortcut win+pause break) click the "Advanced" tab, open "Settings" in the "Startup and Failback" area, remove the two in the "System Startup" area, if it is a multi-system user, keep the "Time to display the operating system list". Click "" to make sure that the additional property of the startup item is fastdetect instead of nodetect, and do not add the noguiboot attribute first, because guiboot will be used later.

The next step is very important, open the "Hardware" tab in the "System Properties", open the "Device Manager", "IDE ATA ATAPI Controller", double-click to open the "Secondary IDE Channel" properties, click the "Advanced Settings" tab, change the delivery mode of devices 1 and 2 to DMA if available, select "None" if the device type can be selected, click OK to complete the setting, and set the "Primary IDE Channel" in the same way.

Open the registry (Start-Run-Regedit), click "My Computer" to open "Find" in the "" menu, enter AutoEndTasks, and click "Find Next". Double-click to open the found result, and modify the "Numerical Data" to 1. Then under AutoEndTasks you can find hungapptimeout, waittokillapptimeout, set the "numerical data" to 2000 or less, here by the way, also modify the time of the menu delay, find the menushowdelay below autoendtasks, the value is in milliseconds, if you want to remove the menu delay, set it to 0.

Now that the acceleration of startup and shutdown has been completed, restart the computer to feel the feeling of fast startup, and the scroll bar is OK after only one or two turns.

After enjoying the fun of the fast reboot, we will further speed up the startup, open the "System Properties" - "Advanced" - "Startup and Failback" settings, open the "System Startup" area, and add noguiboot after fastdetect, so that the scroll bar will no longer be displayed at startup. If you really like the scroll bar display, you don't need to do this step.

After testing, the computer is not well configured, the memory is only 128MBXP system, after optimization, the boot time is significantly accelerated, and the scroll bar only needs to turn more than 1 turn to open the system impatiently.

Nothing was a problem. It's just that you don't boot up at the same speed.

The system is 、、、 intact

Oh, don't worry. Your computer is not automatically updated. The pirated system you installed does not support the update, even if the update is completed, as long as you restart it, you will not be able to enter the system!

Let's make the system There is another way: use the win pe disc to enter the system to delete the latest updates, it is better to redo the system. When you're done, turn off automatic updates for the system.

Patch with security software.

Forehead. That person thinks that the system can only be reinstalled. There are many ways to reload, so let's step on it yourself.

Just redo the system is the easiest way.

This situation indicates that the system boot file is corrupted. Reasons for this:

Virus destruction. The hard drive has damaged tracks.

It is necessary to do data backup under PE and use disk software to detect the track.

Reinstall the system.

Boot and click F8 to enter the safe mode to try, or the last correct configuration, you can go in and optimize the system.

If you can't get in, install the system.

The problem of different system versions, don't think too much. If you want what you want, you can go to the **** image of the system, and then ** a virtual drive called daemon tools lite, load the image and enter the image folder, just like installing general software, you can reinstall the system, it is not difficult. I also made it myself.

Actually, it's not as difficult as you think.

It's not the same system.

The same system, his display will be different, just like the same object, the model can be different, the color can be different This is normal

I still think it's a memory problem because I tried, and it's okay to change it

I don't know very well, I can't do anything about it

Have you checked the motherboard to see if it's his problem.

There are many reasons for this.

It is possible that the system configuration is low, resulting in slow access to the system.

It may be caused by poisoning, so it needs to be disinfected.

It may also be that the patch has just been upgraded and the patch is being installed, so it is to determine what system to install according to the configuration of your hardware, and install antivirus software to avoid poisoning.

It is recommended that you reinstall the system or choose to restore!

Maybe there are too many fragmented files! You can try it out by defragmentation!