What is the price of tension electronic fence?

<> Pulse type electronic fence:

There is a pulse current of 8000V or more, and an impulse voltage of seconds is emitted every second. It has the functions of threatening, blocking and alarming, and does not harm the human body (testing product of the Third Research Institute of the Ministry of Public Security). It is suitable for the perimeter of residential areas, factories and units (the perimeter of flammable materials of dangerous goods projects such as chemical plants, gas stations, and gas stations is suitable for installation when they are more than 16 meters away from the fence).

Turn left|Turn right.

Electronic Tension Fence:

The fence is not electrified, and the alarm and blocking function are added. The entire perimeter project requires the routing of power and signal lines. Suitable for school installations.

Turn left|Turn right.

Mechanical tension fence:

Fully mechanical induction alarm, the project does not need to lay the power cord, only one signal cable is needed. With blocking and alarm functions, it is suitable for installing flammable, explosive and other dangerous goods warehouses.

Below is the system diagram.

Turn left|Turn right.

Tension electronic fence ** to be higher than the pulse electronic fence about double, and can not exceed 40 meters a defense area, such as in the corner of the smaller , I know that this is mainly Shanghai and stone here with more, less in the field, Hangzhou local do not know no one to do, someone to do is estimated in Shanghai to get the goods, if you want to construct it is okay, not far, they have the best business in Hangzhou.

The tension fence is higher than the electronic fence, because each defense area is about 35m or not more than 40m, so the number of defense areas is much more than the electronic fence, the specific problem is actually difficult, there are many determining factors, how to configure the fence product, how high the defense area, how long the perimeter and other factors will affect the final **. There are several questions,1The perimeter of the site, with the perimeter, shape overview and other information, there is a basis for material configuration to reduce the minimum material error 2

Only by knowing the number of defense zones can we make the recommended number of defense zones and thus decide**3Special requirements, according to the requirements of linkage, monitoring, etc. 4Whether the fence needs to adjust the number of lines and the height will all affect **.

Therefore, it is irresponsible to throw away the analysis of the corresponding data and easily give the fence **. In addition, if it is easy to achieve the budget given by the manufacturer due to environmental and other factors, it will inevitably affect the progress and quality of the entire project, resulting in a loss or loss of reputation. Therefore, it is necessary to design according to the total length of the perimeter of the electronic fence installation of your project, the security level requirements of the customer, and the actual situation of the auxiliary installation such as fences and wrought iron fences.

Hangzhou's words are good.

The industry standard of tension electronic fence Huinian requires that the length of each anti-front wax trapping area should not be greater than 40 meters. Bureaucracy.

Tension electronic fence industry standard diagram.

The industry standard of tension electronic fence requires that the length of each defense area should not be greater than 40 meters. The technical requirements for rod installation are required - tension, the mode detection rod is installed at the beginning of the defense area, the stress rod is installed at the end, the distance between the rods is 3 5 meters, and the steering rod is installed at the corner position; As shown in the figure: the industry standard diagram of tension electronic fence.

The main installation methods of tension electronic fence are:The top of the wall is directly mounted, erected above the top of the existing fence, is suitable for the wall body is relatively strong, the top is a plane, the height of the fence is, the installation requires the spacing of the top line of the electric Song Zen fence from the fence is greater than 750mm, and the spacing of the bottom line from the top of the wall is 150 20mm. The middle support rod and the terminal stress bar should also be matched with the direct installation type on the top of the wall, and the tension line should be fixed by the spring at the end of the defense area with the terminal force bar.

Tension electronic fence walltop installation.

Attached direct mounting: The rods are mounted on the side of the wall to avoid the top part of the wall. The middle support rod and the terminal stress rod should be used with the same structure.

The attached angle type is suitable for special construction conditions, generally to avoid the crown eaves or other buildings at the top of the wall, and can also be selected according to the customer's sail dust requirements. When installing, the rod body is fixed on the side of the wall, which is at an angle to the wall.

There are three types of reporting for the common accompaniment of perimeter security electronic fence: short circuit, open circuit, touch the net, and bypass.

Short circuit alarm: 2 adjacent conductor paths;

Broken circuit alarm: any line is broken auspicious macro line;

Touching the net: any wire is touched by the human body;

Bypass: Any wire should be contacted by a conductor.

Tension electronic fence.

In order to improve the reliability of the alarm and facilitate the accurate positioning of the alarm, the distance of the tension electronic fence defense zone division should not be greater than 40m, and the following requirements should be followed

1), the installation route when encountering the corner of the stove friend as far as possible to set up another defense area;

2) When the straight-line installation distance of the fence is less than 30m, a defense zone should be made, and a single defense zone controller should be used;

3), the installation distance in 30 70m should be done two defense zones, while the selection of a double defense zone control wide defense containing device;

Tension electronic fence installation**.

4) When the straight-line distance is relatively large, the double defense zone controller is preferred;

5), when encountering a corner, such as the distance between the corners of the fruit is only a few meters, it should be made into a defense area with the other side of the corner, and a steering stress rod is fixed at the steering place to change the direction of the tension line; If the corner distance is large, a separate defense zone should be set up;

6) In order to have higher sensitivity, the number of best corners in a defense area should not exceed 2;

7), when there is a large height difference between the wall, this should be used as the critical point of two adjacent defense areas.

Tension electronic fence is widely used, not only for the security of ordinary residential quarters and villas, but also for enterprises and institutions, factories, warehouses, substations, water plants, power plants, schools, detention centers and prisons of the judicial system, as well as airports, military bases, institutions, key cultural relics protection units and other places. It is especially suitable for occasions where there is a need for safety precautions, but it does not harm the safety of intruders and requires no arc discharge.

Tension electronic fence host.

Tension electronic fence is mainly used in schools, and mainly in schools in Shanghai.

The difference is huge.

First of all, in principle, the pulse electronic fence, the alloy wire transmits a high-voltage pulse signal; Tension electronic fence, alloy wire is not electrified.

Functionally, the pulsed electronic fence will give people an electric shock in some cases, and it is good to do it, such as the pulsed electronic fence of Elion, as long as it is working normally, once the hand or other parts touch the alloy wire, it will be shocked, and at the same time alarm the system. Others are relatively poor, only under certain circumstances will be electrified, and there will be no alarm, but rest assured, high voltage and low power are usually not too dangerous. So it is a little more deterrent than the tension electronic fence.

Tension electronic fence is not necessarily, although it can play a certain role in blocking and deterring, but compared with pulse electronic fence, because it itself is not charged, so the deterrent effect will be slightly worse. Its role is mainly in detection. When an intrusion occurs, the pulsed electronic fence will not necessarily alarm (with the exception of the Arian drift and bright pulsed electronic fence), but the tension fence will definitely alarm and there will be basically zero false alarms.

From the perspective of safety, the tension electronic fence is higher than the pulse electronic fence from the ** point of view, the tension electronic fence is higher than the pulse electronic fence, and the others check on the Internet.

The difference between tension and pulse electronic fence, generally speaking, one is to judge the change of force, and the other is to have a pulse strike, tension is mainly suitable for schools, gas stations, gas stations, gas stations and other places, and pulse is used in residential villas and other places.

The biggest difference is that the tension electronic fence is not electrified, while the pulse electronic fence is charged (high and low voltage). There are some sites that are not suitable for the installation of pulsed electronic fences, such as:

There are three main differences between tension electronic fence and pulse electronic fence:

Difference 1: The front end of the pulse electronic fence is electrified; The tension electronic fence front end fence line is not electrified, and the difference is two: the installation environment requirements are different; The pulse electronic fence does not have high requirements for the environment, and the turning drop can be installed, while the tension electronic fence has relatively high requirements, and the fence requires a smooth and straight line.

Tension electronic fence will not cause direct or indirect harm to the human body, and is widely used in schools, kindergartens and other places.

With the increasing application of electronic fences, there are more and more types of electronic fences, and electronic fences, as the name suggests, are fences that can be electronically detected, which are divided into 2 types. One is a charged electronic fence called a pulsed electronic fence, and the other is an uncharged tension electronic fence. The pulse electronic fence is not much to introduce, that is, each detection line has high voltage (but will not hurt people), and a short circuit and broken wire will produce an alarm.

Tension electronic fence refers to the use of the tightness of each detection line to detect the alarm situation, but not all that can detect tension is called tension electronic fence. For more than 10 years, the electronic fence has been deeply rooted in the hearts of the people, and the research and development of tension electronic fence is born according to the evolution of pulse electronic fence, in order to adapt to flammable and explosive places and specially developed products, basically similar to pulse electronic fence. The tension electronic fence alarm system is composed of two parts: the alarm controller (master control host) and the front-end fence.

The front end detects intruders and can send out alarm signals; The front-end accessories of the tension electronic fence include: tension detector, control rod, load-bearing rod, intermediate column, alloy wire, wire clamp, warning sign (optional), fixings, etc.

Perimeter security electronic fence.

The tension electronic fence alarm system is a collection of electromechanical devices to prevent illegal crossing of obstacles and induction, transmission (alarm) tension and compression, and shear obstacle information, and is a safe, reliable and economical perimeter anti-intrusion alarm system with digital intelligence.

The perimeter tension electronic fence has the following characteristics:

1.Mechanical parts such as control levers and tension wires are not electrified, and there is no human injury to intruders, which meets the current technical defense requirements;

2.Strong environmental adaptability, stable and reliable performance;

3.The control lever has the function of anti-demolition alarm, and the alarm signal is sent out when the control lever cover plate is disassembled;

4.When the power is off, the power failure alarm signal is output;

The first level of electronic fence is related to several aspects, combined with my many years of experience in perimeter alarm products, the following points are put forward:

1.The first of all, the electronic fence is directly related to the length of our perimeter, the perimeter length is simply the length of the fence, the longer the length, the more materials used, so the higher the cost;

2.The ** of the electronic fence is related to the number of defense areas we set, that is to say, if you want the protection level of the entire fence to be high and the accuracy of the alarm to be high, you need to set up more defense areas. As a result, the number of detectors needed will increase, and the cost will rise;

3.The height of the fence on the perimeter is also related to the height of the fence on the perimeter, the height of the fence for general civil use is about 2000px-2500px, the number of lines is generally 4-wire system or 6-wire system, the more the number of alloy wires, the higher the fence, the higher the cost, combined with cost-effective considerations, it is recommended that you can choose the 4-wire pulse fence for installation, if the fence is lower than the meter, you can consider the 6-wire system;

5.The material of the front-end pulse fence will also be the first of the electronic fence, and now the material of the front end on the market is uneven (mainly stainless steel, glass fiber or galvanized), it is recommended that you find a manufacturer with better quality to purchase, galvanized material is not recommended to buy, because the life of the pulse electronic fence is relatively long, the use of stainless steel can ensure more than 10 years of use, but the galvanized material may only ensure 1-2 years of use, on the whole, or the front end material is better more cost-effective. Now there are many manufacturers on the market, most of them have their own ** system, please choose carefully, if you are not clear, you can consult San'an Good, I hope my answer can help you.

A set of electronic fences, mainly based on the following points: 1. Perimeter length; 2. The number of defense areas; 3. Four-wire system or six-wire system; 4. The front end is made of stainless steel or aluminum alloy material, etc.; 5. Installation requirements (support rod installation method, wiring position, etc.).

After we understand the details of the project, we can get the total price of a set of electronic fences by accounting for materials, labor, tax rate invoices, etc.

The electronic fence is related to the length of the perimeter and the number of areas to be allocated.

This is generally a direct inquiry with the manufacturer.