How to implement multiple dial up Internet access 20

You mean that the same ** line with the same multi-machine dial-up Internet at the same time, there is really no way to do this. I used to be telecom broadband, and I dialed up the Internet at the same time like you (you need to plug the ADSL network cable into the LAN port of the router, not the WLAN port), and you can get different external IP addresses respectively, but after changing Unicom (the new Unicom is Northern Netcom), it can't be realized. China Unicom broadband does not support (I asked their engineer, and said that this function will not be enabled) the same ** line and multiple machines dial-up Internet access at the same time, and now I have to use the gateway mode to access the Internet.

In addition, Telecom will also detect the ** terminal number when surfing the Internet, if it is not the same (that is, in other people's adsl with their own Internet), then go home yours will be stopped, ask customer service said that it is protection, anti-theft. The last thing to say is that these are all set up by broadband operators, and you can't solve them yourself.

Telecom has a limit, how many computers can be dialed are set in the background radius server of telecommunications. Unless you hack into the telecom backend server and modify the restriction on you, it will be difficult to break this restriction on the user side.

I advise you not to bother to ask, I am sure you will not be able to ask the result.

Using a router dial-up, you can get 4 of your machines to access the Internet at the same time.

Why bother with dialing up.

It's very simple, why do you need a switch if you have a cat and a router. You connect the broadband directly to the cat. Then connect the incoming cable of the router to the outgoing end of the cat.

The computer is directly connected to the outgoing end of the router. Turn on the cat and router directly when surfing the Internet. It doesn't matter if other computers turn on or can't.

There must be something wrong with your routing settings. You will need to enter your broadband subscriber password in the route (do not use the default one).

Dial in with a router. You can set the route of the cat.

Just buy a router, set it up plug and play, and you're good to go.

1. Open the Network and Sharing Center, as shown in the following figure:

2.Then select Connect to Network, click Enter, select Dial-up Connection, and enter your account number and password.

Dial-up Internet access uses the PPPoE protocol.

As you said, you need a PPPoE server.

This feature is available on many high-end routers. There are no ordinary household ones.

The easiest way to do this is to use a sea spider soft route.

1.Network architecture: ADSL** line - > modem - > router - > client.

2.If the ** line and the cat are in your room, use (1), but set the Internet account password in the route.

3.If it is a network cable pulled directly (non-** line, the cat is at the landlord's house), the network cable pulled by the landlord and the network cable of the client are connected to the routing LAN port (turn off the routing DHCP), and the client automatically obtains the IP address.

4.See if IE is enabled**.

5.If there are restrictions on the landlord's side, it doesn't matter, set the IP and MAC addresses of computers that can access the Internet to the routing WAN.

Broadband Internet access requires ADSL users and passwords, first of all, connect the network cable port of the 1-other numbers of the route to the computer, set the IP of the same section as the routing on the computer, and then log in to the route, and enter the ADSL account and password into the route. And it's set to connect automatically. After that, connect the network cable of the broadband modem to the router.

The other 1-other ports of the route are connected to the computer, you can go to the Internet, if you can't get on the Internet, you can restart the routing and broadband modem.

The first method: enter your online neighbor, there is a set up home or small office network on the left, click on him, next, select the first one for the connection method, and always the next step, so that you are the host, and the other one is the same, but the connection mode is other. You dial the number and he can access the Internet through your machine.

The second method: buy a router, the route has a dial-up function, and the method is online and offline.

The third method: more dirty, looking for time system bugs, dialing when two machines, crazy dialing, it is possible to log in at the same time, haha. It used to be easy to make. I don't know now.