What happens if I can t get online after a successful wifi connection?

There are several reasons why you can't connect to the internet when you connect to wifi

1. The wifi itself is a problem, the wifi may not be connected normally, resulting in the inability to access the Internet;

2. Router problems, the router may be overheated or damaged;

3. There may be broadband arrears, resulting in inability to access the Internet;

4. The wifi name contains Chinese, resulting in some computers unable to connect to the Internet;

5. Computer system problems, there may be problems with the system, resulting in connecting to wifi but unable to access the Internet.

Suggested workaround:

1. Use other mobile phones or devices to connect to wifi to try whether you can access the Internet and rule out the problem of wifi itself;

2. Restart the router to try, or restore the router to factory settings, then dial up the Internet again, and reset the wifi according to the setup wizard, or change to a new router and dial up to connect to the Internet;

3. Contact the broadband customer service to confirm whether the broadband is abnormal, such as arrears, recharge the broadband, and then dial up the connection;

4. If the wifi name contains Chinese, it is recommended to modify it to English or a combination of English and numbers before connecting;

5. If the above reasons are ruled out, it is likely to be a computer system problem for a long time, and it is recommended to restore the factory settings. See if that solves the problem.

Usually the computer can access the wifi, and after the mobile phone is successfully connected, you can also access the Internet. Computers use network cables, while mobile phones can only be connected wirelessly, that's for sure. There are two scenarios when the phone can't get online

1.The mobile phone does not have a browser to surf the Internet, install a mobile browser, open the browser and you can surf the Internet. Set to turn off wireless features.

Please help friends who understand wifi settings to turn on the wireless function of wifi and you can access the Internet.

The reasons and solutions for connecting to wifi successfully and not being able to access the Internet are as follows:

Analysis: The mobile phone can explain the external network, that is, there is no problem with the broadband, and the focus is on checking the computer part.

Computer system problems, viruses, changed DNS so can't access the Internet! The NIC properties are changed.

This situation will also occur if the router settings are restricted, of course, it is relatively rare! It cannot be ruled out.

First of all, you have to determine whether it is a router problem or a mobile phone problem, can you use another mobile phone to access the Internet, and if not, it is a router problem. What brand of router are you using? Have you set up the DHCP function, and does the IP obtained by your mobile phone correspond to the address pool of your router?

To see if there is a conflict, go to the router settings interface.

The router is not connected to the carrier server.

The IP address has a conflict with the following IP addresses.

The wifi connection can not go to the Internet is how to solve the router problem.

You can use the following methods to troubleshoot:

1. Sometimes the router will crash and a series of problems during long-term operation, you can choose to power off the router for a few minutes and then reconnect to see if you can access the Internet.

2. It is not excluded that there is a problem with the broadband, you can check whether there is a problem with the broadband line, or directly call ** to consult broadband customer service.

3. Check whether the router's Internet access mode is misconfigured, and generally choose to automatically obtain the IP address. If the configuration is incorrect, the router may fail to connect to the network.

1. If you are using a home network, it is recommended to connect to other WiFi or mobile phone personal hotspots for testing and troubleshooting

1.If connected to other wifi is normal.

1) Please do not stay away from the router;

2) Please check whether the broadband account expires, restart the router and restart the phone before trying;

3) If the router has been set to the blacklist and whitelist, you need to check whether the MAC address of the mobile phone is added to the router, if the router does not set the blacklist and whitelist, please power off the router and restart the attempt.

2.If you connect to other wifi, you can't get online.

1) Please turn the WLAN switch back on and try to connect;

2. If you are using a public network:

1.Try using it in a place with a small amount and confirm that the hotspot is working properly.

2.Please check if you need to log in through a browser** to register before you can access the Internet.

3. If individual applications are not available online:

Please open Settings, enter Traffic Management in the search box above and click to enter the Traffic Management page, click Application Networking, and check whether the WLAN permissions are checked for individual applications.

Sometimes, I don't know why this happens, a small exclamation mark is displayed at the wireless network, although it is connected, but it cannot access the Internet. How to deal with this situation? Why can't I connect to the Internet when I connect to the wifi?

What should I do if my mobile phone is connected to wifi but I can't access the Internet? The solution is taught to you, learn quickly.

The wifi connection is successful, but you can't access the Internet, which proves that your router has no network, the computer is a router transmitted through the cat to give the router network signal, if the router does not have Internet access, your mobile phone can also connect to the router's signal, but you can't search the network.

Hello, wifi signal regardless of whether there is a network mobile phone and other equipment can be connected, the user can not use the network after connecting to wifi, first confirm whether your broadband line is smooth, you can check whether the indicator light of the broadband cat has LOS red light flashing, if there is a broadband failure, so the router's wifi can not use the network, at this time, the user can call the operator's customer service to report the fault processing, after the fault report, there will be staff to come to the door to troubleshoot.

If the broadband modem can be connected to the network normally, then it is a problem with the router, and you can check whether the network cable is connected correctly. If the network cable between the broadband modem and the router is normal, you can restore the router to its factory value, and then reset the router parameters to see if it can be restored to normal

2. Then open the browser and enter the management address and login password of the router.

3. After logging in to the background, click the setup wizard, and then fill in the corresponding parameters according to the wizard instructions.

6. After the wireless setup is completed, click Save, and then restart the router to use it normally.

If you are using a vivo mobile phone, the mobile phone is connected to WiFi normally but cannot access the Internet, you can follow the following methods to troubleshoot:

1. Check your phone's settings.

Go to Settings - Other Networks & Connections - Private DNS to see if Private DNS is set, if so, it is recommended to set Private DNS to off and try again.

2. Check WiFi

Please compare whether the same wifi connection is normal with other mobile phones, and confirm whether it is the wifi or mobile phone. If it is due to Wi-Fi, please restart the wireless router to check. Some public Wi-Fi networks require browser authentication before they can connect to the Internet.

3. Check the network permissions.

Please go to iButler - Traffic Management Traffic Monitoring - Network Management - WLAN - Turn on the software networking permission.

4. Check the environmental causes.

If the phone is far away from the router, although the wifi signal is displayed, it may not be able to access the Internet, it is recommended to adjust the distance between the phone and the router before trying.

5. Turn off V-P-N

Go to Settings - Other Networks & Connections - V-P - N - Click on the VPN network that has been connected - Disconnect and connect to WiFi again.

6. Reset network settings.

Back up the data, go to Settings - System Management - Backup & Reset - Reset Network Settings - Reset Settings, and then use View.

Note: Resetting the network settings will clear the connection records such as Wi-Fi, mobile data network, Bluetooth, etc.; If you have dual SIM, you need to select the corresponding SIM card.

<> this operation will not delete the file or software, it will cancel the password and restore all settings, including: set wallpaper, unlock style, wifi, default open program, etc.

Note: Go to Cloud Service - Device Cloud Backup - Backup Data Type - System Data - Return - Back to Back Up Now to back up some system settings and desktop layout;

Cloud service--Data synchronization--Turn on WLAN, Bluetooth, etc. to synchronize data to cloud service.

Proceed to the nearest Customer Service Center address and**. Note: In order to save valuable time, it is recommended to call the service center** sooner or later to confirm the opening hours of the service center and whether the spare parts inventory is sufficient.

The reason why the wifi connection is successful and you can't access the Internet is a setting problem, and the solution is as follows:

Preparation materials: wifi, Huawei Honor mobile phone.

1. Turn on your phone and tap Settings;

2. Click Wireless & Network;

3. After that, click WLAN;

4. Then press and hold the connected wireless network;

5. Li Xianzao clicked to modify the network in the pop-up interface;

6. After that, click on the checkbox that says advanced options;

7. Then click IP;

8. Click the DHCP option button in the pop-up interface;

9. Click Save after selecting which finch is completed, and then you can go online, which is because the IP address was set to static and you can't get on the Internet.

Wifi connection is successful but can not go to the Internet, first see whether there is arrears, in the case of arrears, there is a wifi network but can not access the Internet, if there is no arrears, most of the cases are caused by IP conflicts, reset the settings.

1. Click the network connection option in the control panel in the lower right corner of the computer and click Open Network Sharing Center in the page to enter the network sharing center.

2. After entering the network sharing center, click the name of the wireless network that needs to be set.

3. After opening the name of the wireless network, click the attribute option in the pop-up dialog box to enter the attribute setting interface of the wireless network.

4. After entering the property setting interface, double-click the protocol version 4 option on the page to open the IP address setting interface of the wireless router.

5. After entering the settings interface, click Use the IP address below on the page, enter the appropriate IP address in the dialog box, and click the OK option to save the settings.

What happens if the wifi connection is successful but I can't access the Internet? You check the router plug again, and the adjustment of the antenna should be about the same.

There may be a faulty wifi problem, or there may be a system problem with the mobile phone or electronic device, etc.

Reasons: 1. If the wifi shows that it is connected but cannot access the Internet, in most cases it is caused by the unsuccessful networking of the router, that is, there is no connection between the router itself and the operator's server;

Second, the routing hall is set up in the "Internet control", "wireless MAC address filtering", "parental control" and other functions.

Solution: 1. Check whether the router is successfully networked;

Second, the router is not successful in networking:

1.Remove the router, let the broadband directly connect to the computer, and then test whether the computer can access the Internet normally;

3.If the computer can access the Internet normally, it means that the Internet connection settings in the router are faulty. At this point, you need to set up your router network again.

3. The solution when the router is successfully networked:

1.Turn off "Internet Control";

2.Close"Wireless MAC address filtering"；

3.Turn off Parental Controls.

4. Restore the router to factory settings: reset the router networking, reset the router wifi name and wifi password.