High Score Help Use the computer as a virtual router and the local network to a wireless network

Let's use this!! Did you find that the wifi can't be connected? Or can't you connect to the Internet?

The premise is to turn off the firewall of each book first.。。。 Then follow the steps below to set it up.

1.First, set the IP address on each notebook, set it in the same network segment and cannot be repeated, such as and . Here's how to set it up: Open Control Panel - Network Connection - Right-click "Wi-Fi Connection" - Properties - Internet Protocol.

2.Go back to the interface of the "Wi-Fi" property, click on "Wi-Fi Configuration" - Advanced, and select "Computer to Computer Only". The above 2 steps are to be performed on each computer.

3.Select a machine as the server. On the Wireless Network Configuration page, click Add.

4.For the security of the local area network, in the pop-up page, it will be"This key is automatically provided to me"The front tick is removed. Then set the SSID number and the network key (a 16-base character that must be 0-9 or a-f.).

This set of characters requires 10 characters), click OK and the server setup is complete.

With wifi genie. Don't use the latest version. The old version is easy to use!

If you're a desktop, you'll need to have a wireless router and a wireless card, and if you're a laptop, you'll only need a wireless router.

Both wireless routers and wireless network cards are available.

The first one is your router's client, so don't worry.

It can be seen that there is one wireless connection, and there is one connected with a wire, are you connected to both the wire and the wireless???

Do you want two computers to access the Internet through one network interface?Then connect one computer directly to the network, and the other computer is set to the same IP and directly connected with a network cable, but the speed will be affected! I used to use this method with a wireless network, and I don't know if it will work if it is wired, so you can try it first!

If you do it the way you think, it will be troublesome, because I tried, but in the end I gave up.

Suggestion: Buy a wireless receiver (commonly known as wireless network card equipment), this is not expensive, one or two hundred yuan, installed on a desktop, and the same as a notebook through wireless Internet access.

"I want to connect the router through the local connection of the laptop, and then let the router connect to a computer," which means that the laptop and the other computer are connected to the router through a network cable, and they use a network cable to access the Internet together, right?

You're thinking so beautifully.

I won't tell you how to get such a thing.

Not quite sure what you're trying to do, you feel like you're messing around.

Mobile phones use WiFi (Internet protocol), which is different from laptop protocols.

Your phone protocol is set up, but your laptop protocol is not set up (no computer Wi-Fi is set up).

Connect to your computer's wireless network Do you need to enter a password? Or did you choose the wrong one! The screen name of the router!

I also want to know, my computer can be used wirelessly, but it often drops, and this has never happened to my phone.

The laptop protocol is not in place.

Hello: This is a wireless optical modem of Telecom, some optical modems are not set up wireless, only signal, no network, you can use other mobile phones to connect to this network, see if you can connect.

It's very simple, you have to go into your wireless routing settings, no IP, no settings, of course you can't get on, I'm also using it at home

Go in or go to tune it, some wireless routes will be automatically obtained,

Do I need to dial up when I connect? If you want to dial up, you can only do it on your desktop, and other devices can't get on it at the same time, I don't know if jailbreak refers to the recovery of the routing function, if so, you can write the account password to the router and it can dial by itself.

This network requires a dial-up connection to access the Internet. Buy a router to solve the problem.

1.The built-in tethering function can be used to share the Internet connection (ICS), and other kwf, winroute, wingate and other tethering software can also achieve the same purpose.

2.Virtual Wi-Fi is useless if you don't have a wireless card

Can you turn your computer into a router? It's amazing.

Agree to the 2nd floor, in addition, if the landlord needs a detailed tutorial, please leave an email.

Open the Network and Sharing Center.

Click on the Wi-Fi link.

Then click on the properties.

There are Internet protocol versions in it, 6 and 4, you can change it by double clicking, and generally use routes to actively obtain IP.

If you don't, you won't be able to access the Internet.

That's the question that you guess you're looking for.

You'll need to set IPv4 to the same network segment as your router.

Wi-Fi? The wireless network should be set up separately. You look at which machine you can get on.

Just create a new wireless network. It's more troublesome. Go to another machine and look at the icon in the lower right corner. None of the properties that show up are online neighbors**.

Check whether the wiring is correct, and then go to the router settings page to see the status (if you don't get the IP automatically, you need to manually set it to the same IP as the C segment), go in and see if the dial-up account password is set, and whether the connection mode is manual or automatic.

Finally, it depends on whether the wireless network settings are turned on and whether there is a password (the general wireless network card will automatically match the encryption mode).

1. Is the router connected to your home's broadband? (Connect the network cable or ADSL of the broadband at home to the Internet or WAN port of the router).

2. Is there a username and password for your home broadband set in the router?

3. Make sure that the network provider does not forcibly disable the router function?

Wireless involves encryption, keys, encryption methods, a whole lot of things... It's really hard to explain...

Connected indicates that the password is correct. Try it little by little.