How to replace the toilet lid of the integrated toilet and how to remove the toilet cover

1. How to replace the toilet lid of the integrated toilet:

1. To install the toilet lid, you actually need to remove the fixing bolts at the back of the toilet, remove the previous toilet lid, and then replace the new toilet lid with a fixed screw cap. 2. Generally, the position of the screw cap is not easy to find, some are in the light, and some are in the dark. In the dark place of the screw cap, inside the toilet bowl against the side of the tank, open the lid.

If you put your hand in it and touch it upwards and in the direction of the tank, you should be able to touch it, but you can't see it.

3. It should be noted that most toilet seats are not divided into sizes, and you can adjust the two bolts when installing. However, it is also necessary to measure the size, the distance between the screw holes, the width and length of the toilet seat, and then buy a new toilet seat to replace it.

Second, the maintenance of the integrated intelligent toilet:

1. Do not knock or step on the pottery sanitary ware.

2. Close the toilet lid and don't be fast.

3. Please gently wipe the sanitary ware with clean water, and do not use cleaning agents, solvents, etc. with abrasive effect or strong (acid and alkali) to clean the toilet and water tank accessories, so as not to cause damage to the surface of the product and accessories.

4. When the detergent is poured into the toilet, do not close the machine immediately, and close it after rinsing with water.

5. Do not use high-temperature water to scald the sanitary ware.

6. The electronic eye of the smart toilet should be avoided from being flushed with water to prevent the occurrence of wet water on the induction circuit board or short circuit in electrical appliances.

7. During the use of the product, if it is still impossible to deal with it according to the instructions for use, you should contact the local supplier or manufacturer for professional maintenance in time, and do not cause accidental damage by yourself.

It is necessary to be able to buy a toilet lid of the same model, and then remove the old toilet cover from the running part before it can be installed.

Tear down the old one and take it to the Baizhuang plumbing and sanitary ware market in the Hebei accessories store with one, Hebei accessories professional in this area of accessories.

1. Align the toiletPlace the toilet lid on the toilet first, taking care to align the toilet lid with the toilet bowl screw hole.

2. Upper screwsAfter aligning the screw holes, insert the screws into the screw holes of the toilet lid and toilet.

3. Tighten the screwsTighten the screws with a screwdriver.

4. Buckle the lidPlace the lid over the screw holes.

5. Complete the replacementThe finished renderings are as follows.

How to change the toilet lid:

Method 1: Some toilet seats are fixed with screws, at this time, you only need to find the screw cap, use a wrench to remove the screws, and then replace them with new ones. The screw cap installed in the open place is easy to unscrew down directly, and the screw cap installed in the dark place is not visible, and it is generally located on the side of the water tank in the toilet, and it can generally be found by touching the direction of the water tank after opening the lid.

Method 2: If the toilet is fixed with fixing bolts, when replacing the toilet lid, you only need to remove the fixing bolts at the back of the toilet to remove the toilet lid. After measuring the size, the distance between the screw holes, and the width and length of the toilet seat, buy a new toilet seat to replace it, and operate in the opposite direction when screwing the screws during installation.

Method 3: Different styles of toilet lid installation are also different, and the position of the bottom end of the toilet lid connected to the toilet is fixed with screws, as long as the hand reaches down to the rear position of the toilet to find the screws on both sides and unscrew, you can take off the entire cover, and then replace the toilet lid, this way is also the most convenient.

Method 4: Of course, if these simple disassembly methods do not work, it is recommended to find a professional to disassemble and replace, remember not to forcibly disassemble by yourself, so as to damage the toilet bowl. At present, many bathroom brands also provide free door-to-door replacement services for toilet seats.

How to replace the toilet:

First, unscrew the connecting pipe between the toilet bowl and the wall. Then shovel off the white sealant under the toilet bowl with a razor blade, and the toilet bowl can be taken down.

When installing, first clean the toilet eye, there can be no sewage, the toilet bowl with its own eye aligned with the toilet eye on the ground after aligning it flat, and then left and right to lift the toilet bowl to the inside of a circle of glue, in the flat outside the toilet bowl and then a circle of glue to connect the pipe to the wall, do not use water for 42 hours after installation, and wait for the glue to dry.

? ?When we buy a new toilet seat, after looking for a well-intentioned toilet seat, we need to pay attention to the adjustment between the mounting holes of the toilet seat, during the installation, first remove the fixing bolt behind the toilet, remove the previous toilet cover, and then replace it with a new toilet cover, and finally fix the screw cap.

?Generally, the installation method of different styles of toilet seat may also be different, in general, the bottom end of the toilet seat is connected to the position of the toilet bowl with screws, and the old toilet seat can be taken off by reaching down and unscrewing the screws on both sides.

?After finding the screw cap, unscrew it off with a live wrench, and then replace it with fresh air, but the position of the general screw cap is very difficult to find, some are in the light, some are in the dark, the screw cap in the dark is leaning on the side of the toilet tank, open the lid and put it in with your hand, you can touch it upward, generally look at a piece.

You find a person who specializes in this kind of work to help you get it, they have accessories, have experience, know how to get it, there are many kinds of toilet seats, how to install them, you need the picture above, you send the toilet seat ** up, so that you can tell you about it, Xi'an Xiaofu toilet seat replacement.

Methods for removing toilet lids include old-fashioned toilets, smart toilets, and regular toilets.

1. Old-fashioned toilets.

The toilet lid of the old toilet bowl is more special, it is not completely closed, and the bolt can be touched from the side, and the bolt can be twisted by hand or tool to remove the toilet seat.

2. Smart toilet.

The toilet lid of the smart toilet is relatively simple when disassembled, you need to unplug the power supply before disassembly, turn off the water inlet valve, and then you can press the disassembly button on the side, and you can remove the toilet lid by pulling it from front to back, which is convenient and labor-saving. Of course, some smart toilets do not have a button to remove the toilet lid, and you still need to remove it step by step.

3. General toilet.

In general, the toilet lid is mostly fixed with screws, so before disassembling, you need to find the position of the nut, and then use a screwdriver or other tools to remove the screws, and you can easily remove the toilet seat. There are some exceptions, some toilets are bolted to fix, and the bolts need to be unscrewed when disassembling before the toilet lid can be removed.

Introduction of smart toilets

The buttocks of the smart toilet are washed with a unique vortex rotating bubble nozzle, which has a massage effect and promotes blood circulation, and completely cleanses the feeling. Avoid bacterial multiplication. Smart toilets originated in the United States and were originally equipped with a warm water washing function.

Later, through South Korea, Japanese sanitary ware companies gradually introduced technology to start manufacturing, adding a variety of functions such as toilet lid heating, warm water washing, and sterilization.

There are three kinds of smart toilets on the market, one is a smart toilet with cleaning, heating, sterilization, etc., one is a smart toilet that can be automatically changed, and the other is an intelligent toilet with automatic change and cleaning function.

The previous toilets are very easy to change, now the all-inclusive toilet looks more beautiful, but it is very inconvenient to replace the toilet cover, this requires methods and experience, sometimes the toilet bowl has to be dismantled, the toilet lid is changed, and the experienced thin person is better to operate.

The following is a good exchange.

The following is not easy to change.

The following kind can only be replaced by dismantling the toilet.

How much does a toilet lid cost.

Oh, it depends on what kind of brand, what brand you bought, don't you install it for free.

You can go to the ** store and there is a store called Permanent Bathroom, which has installation instructions.

You have to have a certain amount of facilities.