What modules are required for the intelligent lighting control system based on the microcontroller

Hello! See what you want to do?

There are many kinds of intelligent lighting systems, and to realize the switch control of the lamp, you only need to realize the switch control of the lamp, the rail cascade module (with power supply) and the 4 8-channel intelligent lighting switch control module can achieve the effect.

Hello, glad to answer for you. <>

The design system software of the light-controlled lamp based on the 51 single-chip microcomputer involves: the system hardware design: including the selection of the hardware such as the photoresistor, the LED lamp, the quiet vertical 51 single-chip microcomputer, and the design of the connection circuit, and the writing of the software program

If you need to manually control the brightness of the light, you also need to write the human-machine interface program to control the brightness of the light through buttons, knobs and other controls to control the brightness of the light. Design a light-controlled night light based on Proteus.

The system is required to be able to monitor the lighting changes in the room in real time, turn off the lights when the light is normal and the light is strong, and automatically turn on the lights when the light is weak to provide lighting. At the same time, when the light exceeds a certain threshold, the buzzer is turned on to realize the alarm function.

There are many kinds of intelligent lighting systems, simple lighting control, it is a set of lighting control system composed of cascade modules (with power supply), intelligent gateway host, dimming controller module, switch controller module, button panel, 6-channel IO module, etc.

The control of lighting can be done using smart phones, PCs or tablets, and you can customize and use the intelligent control needs of the area responsible for each gateway host at will.

"Smart lighting system comes" by the self-linking module of the stage.

Intelligent network. BAI off the host, dimming control DU control ZHI device module, switch controller module, button panel DAO, 6-channel IO module, etc. are combined into a lighting control system.

The wiring between the modules can be connected by intelligent bus connecting pieces or by four-core wires, as shown in the following figure

The control lighting can be done using a smartphone, PC or tablet, and then it can be customized and used at will to meet the intelligent control needs of the area responsible for each gateway host.

Wireless networking doesn't have to be so troublesome.

1. If you measure the human body, you can choose the infrared sensor of the human body, when the beam is blocked, the output is high, this sensor has a semi-finished product, the output is also pulsed, when there are people, the output is high for 3 seconds, if the person does not leave, continue to output, and the person will become low after leaving.

2. The light source is basically measured with a photoresistor, and the photoresistor is attached to the triode and other components to make a photosensitive sensor, and once the light intensity is lower than a certain value, a high and low level signal is returned to the single-chip microcomputer, which is processed by the single-chip microcomputer.

3. 51 can be used for single-chip microcomputer, and a 7407 can be connected to the output pin, and then connected to the relay.

4. In fact, you can also use a single-chip microcomputer, as long as a logic chip is OK, for example, if there are people at high levels, and the light is weak when high levels, then as long as the two signals are sent to a AND gate, and the gate output is a high level, and then drive the relay!

I hope it can help you, for this thing you can be divided into several modules, one module at a time and then synthesize, search more on the Internet, there is a lot of information on the Internet to learn from, come on!

The intelligent lighting system needs an intelligent switch panel and a host, and you can use your mobile phone to remotely control the lights at home.