Why does the computer keep showing that the driver failed to load because it did not pass initializa

I've also encountered your problem, but when I installed the ** driver again, the driver wanted to upgrade at that time, and it was ** one, who knows** It's over After driving the machine a few times, the blue screen keeps coming.

It doesn't seem like the blue screen is constant on your machine, but at least it gives you a chance to go in and install the driver, which is much easier, so you turn on the machine first and see if there are no cracks on the circuit board of your machine If you don't have hardware, it's fine, don't be as fragile as the computer thinks. Hehe.

Since you don't want me to make it too complicated, I'll simply say that most of your problem is with your post-installer, which you do:

1Reinstall the system (or install the program after uninstalling everything in safe mode) and then install the drivers one by one, restart the test after each installation, and see if she is still blue!

Of course, it is not necessarily the driver, sometimes the firewall or anti-virus software will also blue screen, resulting in a driver error, but the above is the easiest way.

I see that most of your computer is incompatible with the driver or which post-installed software the driver is, and the fall only makes you more worried about the problem with the computer, so I desperately checked him, guessing that he was broken, and finally there was really a problem. Hehe.

If there is no way, reply, I will tell you the complicated method, and I will check that there is a problem with the computer. It's a bit of a computer program basic

One click, and you'll know.

Upstairs, despise copy-paste streams, and quoting others doesn't mean it's a reference!

Open the system device management, you will find that there is a problem, only to reinstall one.

1. Clean up and optimize the system in the following ways:

1. Use 360 Security Guard to optimize your computer system, only retain 360 Security Guard, 360 Antivirus and Input Method Startup, and optimize the others after checking.

2. Use 360 Security Guard to defragment your hard drive partition.

3. Uninstall software that is rarely used or rarely used.

4. Use 360 Security Guard to thoroughly clean and optimize system junk files.

5. Run 360 Security Guard and 360 Antivirus to carry out a thorough anti-virus and malicious plug-in removal of the computer system.

2. Shut down unwanted processes.

Is it installed Master Lu?,If you don't install it, you can install one.,After opening it, find "Drive Management" and scan it with it.。

Scan the driver with 360 Security Guard, and reinstall it if it doesn't.

If you don't have a network card driver, find your motherboard driver and install it.

If only that software is like this, it is recommended to delete this software, and then reinstall it again, if all the software is like this, it is a virus in the computer, dare to reinstall the system.

And guess why?

First of all, take a look at what the prompted program is, it may be that there is a problem with this program, if it is uninstalled and reinstalled. If there is a prompt when you boot up, you can remove the boot start of this program. If you can't find out or prompt not the program is the system process, you can recall what program software, plug-ins, patches or drivers you had before this kind of failure, and if you remember to uninstall them all first.

If you can't find it, it is recommended to check and kill the Trojan horse and repair the system.

1. Please use the system's built-in system restore to restore to the time when you do not have this failure (or use the restoration software to restore the system, if you can't enter the system, press F8 to enter the safe mode to restore the system). Hand clear.

2. If the fault persists, use the system disk to repair, open the command prompt and enter sfc scannow Enter (there is a space between sfc and ), insert the original system disk to repair the system, and the system will compare and repair it from Bichi.

3. If the fault persists, set the optical drive in BIOS as the first boot device, insert it into the original system installation disk, press the R button, and select "Repair Installation".

4. If the fault persists, it is recommended to reinstall the operating system.

Use the system that comes with the system restore method:

The system comes with the system restore: "Start" "Programs" "Accessories" "System Tools" "System Restore", click "Restore my computer to an earlier time", press Next, you will see that the date page has a dark date, that is the restore point, after you select, click Next to restore (win7 restore the system, in the control panel then the device and security sub-option and then the backup and restore sub-option).

Friend, have you updated: [Graphics Driver] and [Sound Driver]?

If it is updated, it is: what program is in conflict with the game or what program is missing from the game!

Try! 4。Check if other games are installed, uninstalled, incompatible!

5。Try: 360 system first aid kit to kill stubborn Trojans! "File Recovery Area" to delete files completely!

System Repair, Select All, Fix Now! [Critical step].

Network repair, Nazi starts repairing, restart the computer! 【Key Step】DLL File Recovery, Add Lost DLL File Recovery!

6。Optimize the master code book and clean up the registry junk! Reload!

7。Game version, incompatible with computer memory, conflicts, try to change the game version!