-
Hardware:1The board is not good or there is a problem, which causes the device to run unsteadily.
2.The heat dissipation of the computer is not good, which causes the CPU or graphics card chip to be too hot and the machine is stuck.
3.Poor hardware compatibility, which is common on non-branded build-compatible machines.
Software: 1. The user is controlled by a remote Trojan, and everything on the computer is in the hands of hackers.
3.The driver installed on the computer is not compatible, and the computer will be stuck after running for a period of time.
4.The compatibility problem of the software itself, the serious conflict between the software incompatibility and the system conflict, and the computer jam.
-
What to configure.
Is the temperature high, how much is the thing that opens.
The computer hard disk is used for a long time, it will also make the computer slower, repartitioning and installing can fix the logic is bad, the computer will be faster, and the physical read and write speed of the hard disk is slow, and it can only be changed to a better point! The memory can also be erased down.
Is the internet speed stable?
Open Tencent PC Manager - Toolbox - Internet Speed Protection - CrossFire On] Internet speed protection function can enable you to continue to surf the Internet and listen smoothly when network resources are tight.
All commonly used browsers are supported, so that you can surf the Internet without worry.
Intelligently allocate network resources to maximize your bandwidth usage.
-
1. It's that your computer configuration is too low. 2. It's your internet speed that doesn't work.
-
The graphics card is too low and the game does not work properly.
-
It's usually a graphics card problem, you just go and change the graphics card, and you tell the person who sells the graphics card that you want to play games.
If it's slow, then you can try this method.
1) Boot optimization: Start - Run--- enter msconfig and press enter--- start--- remove the previous tick except ctfmon, click Apply --- OK.
2) Delete unnecessary files: Delete files that don't need to exist, patches. Open My Computer - Tools --- Folder Options --- View - Show All Folders and Files - Apply OK.
Then remove c windows $All files. Remove C Windows i386
3) Right-click on Start - Properties --- select 'Classic Start Menu' - Apply. It can free up a lot of memory.
4) Right-click on the blank space of the desktop - Properties--- select 'None' in the background of the desktop --- - Apply, which can free up a lot of memory.
5) Delete the clipboard, which can free up a lot of memory. Method: Start --Run --Enter Clipbrd, open the clipboard program, and click '--Delete. You can free up a lot of memory.
6) Clean up the system garbage, method: start the --- run--- enter cleanmgr and press enter--- OK---OK.
7) The most important thing is to enter the safe mode and use anti-virus software and Trojan tools to do a comprehensive scan of the system.
Finally, set up the virtual memory.
Set up the virtual memory correctly: Right-click on the My Computer --- Properties--- Advanced --- Performance box, click on the 'Settings' card--- click on the 'Advanced' box -- click on the 'Virtual Memory' box and listen to 'Change' -- select 'Custom size'.
In general, the maximum value is a multiple of the initial value.
Open the Task Manager --- click on 'Performance'. Look at what the 'Peak' is in the 'Approved Usage' box at the bottom left, which is calculated in Task Manager. Extrapolate it to MB units, which is the maximum value.
Open it a few more times and see the highest value in a few times). For example, the peak is 650328k. Then the maximum value of the computer is 650328k
1024=636MB, then the initial value is 318MB. Once you've filled it out, click Change.
After the above operations, the virus was removed, space was freed up, startup items were reduced, junk was removed, and unnecessary files were deleted. Free up memory. Naturally, the system will run faster.
Adopt oh、,)
-
The configuration of the computer is going to be upgraded, first of all, the graphics card is too low.
-
One: To reduce the picture, you can use the resolution of 800*600 in the CF settings to turn off the display trajectory.
Two: CPU overload will also cause the graphics card effect to not be fully played, resulting in a decrease in FPS, so turning off QQ, YY IS and other software can also appropriately increase FPS.
Four: the resolution of the computer is appropriately reduced, the specific computer monitor is analyzed, and the computer with a relatively low configuration can even consider using 16-bit color (usually we use the highest 32-bit color).
Five: Forcibly turn off the vertical sync of the graphics card, which is necessary.
Six: Right-click on "My Computer", Properties, Advanced, Performance, and select "Best Performance".
Seven: Desktop Properties, Settings, Advanced, Monitor, Screen Refresh Rate Adjusted to 75 or more.
Eight: The fewer files on the desktop, the better.
9. Clean up system junk.
-
Remove some anti-virus software
-
Looks like it's time to change computers.
At least change your graphics card.
-
How about the PIN, if it is low, it is recommended that you change to a graphics card.
-
Can you send a screenshot of a CPU?
-
Change the graphics card to a card, probably A1300 or more.
-
1. The computer configuration is low and the memory is not large enough, resulting in insufficient memory when running CF games;
2. There is a problem with the CF game client program, or the version is too low;
3. There are too many applications opened in the computer, resulting in too much memory occupation;
Close all unnecessary programs before entering the game. If you still can't get in.
Use win+r shortcut keys to open the run dialog box, and then after opening, type cmd command, click OK, a command prompt will pop up, enter in it: bcdedit set increaseuserva 3072 enter.
-
How to change the graphics card on your computer:
1. First turn on the computer host, pay attention to be sure to remove the screws before dropping.
2. We find the location of the graphics card. The average graphics card connector is located between the CPU cooler and the white PCI slot, and is usually made of black and colored plastic.
3. If the original computer is equipped with a graphics card, we need to unplug the original graphics card first. Note here that some brands will use glue between the hardware to prevent consumers from changing the hardware without permission. In this case, we first need to carefully separate the gum when we replace it.
4. Then insert the replacement graphics card into the alignment interface, and the insertion process needs to be kept vertical, and the force needs to be balanced. After insertion, tighten the screws and fix it. If the graphics card needs to be externally powered, you also need to insert the corresponding power connector into the power supply interface of the graphics card.
5. After completion, install the host and it will take effect when it is turned on.
-
The reason is caused by the lack of memory on your computer, try increasing the virtual memory.
The other thing is that you can't have a lot of stuff on your system disk to leave room for virtual memory.
You can try transferring the virtual memory to a different disk.
-
This is an out-of-memory Wire, which will require some memory space to run when it is running, so you try to increase the virtual memory.
Right-click on My Computer, click Properties, select the "Advanced" tab, select the first "Settings", select the "Advanced" tab in "Performance Options", click "Change", adjust the virtual memory size, usually the custom size The initial size is the actual physical memory, and the maximum is multiple of the actual physical memory, and finally click "Settings" to confirm the completion.
If you have any other questions, let's talk about it.
-
A big reason for the problem of disconnection is that the network is not good, especially when logging in across the network (such as Netcom network landing on the telecom server), the network will naturally drop if it is not accelerated, and you can first use a game assistant.
2. Start the game from the game assistant.
The game assistant can use free acceleration, and it is the game platform of the game operator, which is safe and reliable to use. After installing and opening, the assistant will automatically scan the game, and the list on the right will be displayed, and then start the game from the assistant.
3. Use antivirus software to set up the game's network speed protection.
In addition to turning on the acceleration, you should also make some preparations on the computer. For example: if you like to play games while listening to songs, the computer will adjust the network speed to ** songs, and you can use antivirus software to set up the mountain to ensure the network speed when playing games.
4. Check the users of the router.
Now the Internet is basically used routers, computers can be used, mobile phones, other tablet devices can also access the Internet, but sometimes friends come to your house, rub a net, watch a movie or something, it will definitely make your game appear stuck and miserable, when playing the game talk to them in advance, you can also directly use antivirus software to kick the net.
5. Check if your internet speed needs to be upgraded.
In addition to playing games, there is always a buffer when you watch**, it is necessary to check the network speed, or let the relevant personnel check it to see the reason for the fluctuation of the network speed**. If possible, upgrade the broadband bandwidth.
6. Turn off redundant programs before starting the game.
7. Pay more attention to the game's announcements.
You're playing a game with your friends.,If two people go offline together.,It's basically a server problem.,The game's server may also be faulty.,Or maintenance.,Or something else.,Go and see the game** announcement.。
The solution is as follows: 1. The create global temporary table t temp statement is to create a temporary table, there are two kinds of temporary tables created in oracle, one is transaction-level and the other is session-level, when the creation of temporary table statement is followed by on commit delete rows, it means that the temporary table is transaction-level, and when on commit preserve rows it means that the temporary table is session-level. >>>More
First: use the attention transfer method, when you feel particularly irritable, do something that you like or are interested in very much; >>>More
Hello, I bought a new car, and in the process of reversing, I broke the fence of the community, and I paid for it at my own expense, and I just repaired it and restored it. There seems to be nothing to dwell on with this one.
Enterprises may face the following problems in the process of performance management: >>>More
It's really hard to start in a class, and if you get angry or something, the whole class will look at the joke! Depressed to death. >>>More