How do I set it to slow down my optical drive in Windows?

It should be c

This file records which program to run when you put it into the CD.

Option a is a batch file, run the commands written in it in turn.

Option b is the system configuration file.

Option d is an executable file, which is usually the installation file of a program.

C should be selected because the file system will automatically read it when it detects it.

I'm also a little confused about this.

It is recommended that you ask a specialized computer company.

Shanghai. Shifeng's technical service is very good.

It's better not to install the IDE driver, Microsoft original is the best.

bios

After turning on the computer or restarting the computer, "waiting...... is displayed on the screenBoot sequence in BIOS Features Setup is a function that we often adjust, usually the order we use is: A, C, SCSI, CDROM, if you need to boot from a disc, then you can adjust it to only cdrom

After the BIOS turns on the computer or restarts the computer, when the screen is shown as follows, press the "DEL" key to enter the BIOS settings interface, and in the boot device priority (boot device order), set the 1st device priority as your optical drive.

Press the "Del" button on the BIOS boot screen to enter the BIOS setup menu (some press the F1 key), and set the First Boot Device to CDROM. in Advanced BIOS Features

Right-click on your desktop computer (or inside the Start menu), select Manage, and then select Disk Management.

Select the physical drive, right-click to change the drive letter and path, and delete the drive letter.

Then select the virtual drive, right-click to change the drive letter and path, and set it to the drive number of the physical drive.

Finally, select the physical optical drive, right-click to change the drive letter and path, and set it to the driver of the virtual optical drive.

When operating, please close all open files and folders of all physical virtual drives, and there may be settings that cannot be displayed in the computer after that, you can restart the computer to finish.

Step 1: Right-click on my computer and find "Manage".

Step 2: Find "Disk Management" under "Storage" on the left side

Step 3: Find the cd-rom 0 block, right-click, and then click "Change Drive Name and Path".

Note: Normally, CD-ROM 0 is the real CD-ROM drive, and the CD-ROM 1 below is the new drive after installing the virtual CD-ROM drive.

Step 4: Click the "Delete" button, and then click "OK".

Step 5: Find CD-ROM 1 again, right-click, and then click "Change Drive Name and Path".

Step 6: Click the "Delete" button, and then click "OK".

Step 7: Perform step 5 again, then click the "Add" button and then the "OK" button.

Step 8: Perform step 3 again, then click the "Add" button and then the "OK" button.

Note: Doing so inverts the drive letter of cd-rom 0 with the drive letter of cd-rom 1.

For example, the original CD-ROM 0 (i.e. real optical drive) is K drive, and CD-ROM 1 (i.e. virtual optical drive) is L disk, after these steps, it is changed to: CD-ROM 0 (i.e. real optical drive) is L drive, and CD-ROM 1 (i.e. virtual optical drive) is K drive.

Set up in BOIS,Now it's generally installed Win XP、Win 2003,

How to reinstall the system Method 1: First, make sure that your optical drive is in the first boot order and supports booting from the optical drive. To install from a disc, set up the BIOS so that the system can boot from the disc.

Here's how to do it: (1) Start the computer, and when the press del to enter BIOS setup message is displayed on the screen, press the Del key on the keyboard to enter and play the motherboard BIOS setup interface. (2) Select the Advanced BIOS Features option and press Enter to enter the setup program.

Select the First Boot Device option, then press the Page Up or Page Down key on your keyboard to set it to a CD-ROM, so that you can change the system to CD-ROM boot. (3) Go back to the main menu and save the BIOS settings. (The save method is:.)

Press F10, and then press the Y key) (4) Then put the disc into the optical drive, and restart the computer, the system will boot from the disc and display the installation wizard interface, you can follow the prompts step by step to install the settings on the OK.

Assemble Motherboard Brand Notebook Brand Desktop Motherboard Brand Boot Button Notebook Brand Boot Button Desktop Brand Boot Button ASUS Motherboard F8 Lenovo Notebook F12 Lenovo Desktop F12 Gigabyte Motherboard F12 Acer Notebook F12 HP Desktop F12 MSI Motherboard F11 ASUS Notebook ESC Acer Desktop F12 Yingtai Motherboard F9 HP Notebook F9 Dell Desktop ESC Metrojet Motherboard ESC or F12 Lenovo ThinkPad F12 Shenzhou Desktop F12 Colorful Motherboard ESC or F11 Dell Notebook F12 ASUS Desktop F8 ASRock Motherboard F11 Shenzhou Notebook F12 Founder Desktop F12 Spartaka Motherboard ESC Toshiba Notebook F12 Tsinghua Tongfang Desktop F12 Onda Motherboard F11 Samsung Notebook F12 Haier Desktop F12 Dual-Sensitive Motherboard ESC IBM Notebook F12 BenQ Desktop F8 Sky Motherboard F10 Fujitsu Notebook F12 Elite Motherboard ESC or F11 Haier Notebook F12 Champion Motherboard F11 or F12 Founder Notebook F12 Foxconn Motherboard ESC or F12 Tsinghua Tongfang Notebook F12 Top Star Motherboard F11 or F12 MSI Notebook F11 Mingxuan Motherboard ESC BenQ Notebook F9 Weconex Motherboard F8 GIGABYTE Notebook F12 Jet Wave Motherboard ESC Gateway Notebook F12 Intel Motherboard F12 eMachines Notebook F12 Jiewei Motherboard ESC or F8 Sony Notebook ESC Zhiming Motherboard F12 Panying Motherboard ESC Panzheng Motherboard ESC Motherboard F9 Note: For other models, please try or refer to the common boot hotkeys of the above brands.

Before entering the system, keep pressing the DEL key or F2 key to enter the BIOS, and then click on the boot option, and select CD *** as the first boot item.