Why can t the CD drive open on the computer?

The specific steps to open the computer CD drive are as follows:

1. If it is a notebook computer with an optical drive, there is generally a button on the far right side of the keyboard, which is in the position of the figure, as long as you press it once, and it will pop up after a while.

2. If it is a desktop type, you can first open the "computer" by manually clicking the mouse.

<>3. At the bottom of the open page, find the "drive" with *** and cd words, and double-click the left button to prompt a pop-up.

4. If this page is displayed, it will pop up successfully, and then put in the disc you need to use, and place it correctly face up, and the disc drive will be automatically put in.

5. If there is no response to the above, update the optical drive. Open the "Device Manager", find the item with the disc icon in front of it, and double-click with the mouse.

6. Right-click the disk driver, click "Update Driver", and operate in order to return to normal.

First click on "My Computer - CD Drive."

Right-click and select Open if it doesn't work.

If the reading light is on when pressing the button, it means that the power supply has not fallen, the solution is, there is a small hole in the corner of the panel of your optical drive, prick the small hole with a needle, and then press the open button of the optical drive, try a few more times to open, there is a chance to clean the machine, more dust will be stuck.

If you can't, fix it.

Software issues: There are problems with the software, operating system, etc.

You can check this first.

Problems with the optical drive itself.

If the optical drive is CD *** compatible.

In the BIOS, adjust the CD drive settings *** and CD *** compatibility mode to each other, try to have some *** compatible drives set to compatibility mode, which cannot be ejected normally, and the system can confirm the optical drive correctly.

Hardware Preliminary Check:

First of all, check whether the data cable connected to the optical drive is plugged in firmly or reversed, and whether there is any open circuit or poor contact. If necessary, this can be verified with a normal cable replacement. If the optical drive and the hard disk are connected to the same IDE interface using the same data cable, you also need to check whether the master and slave jumper settings of the optical drive are correct.

Whether the power supply cable of the optical drive is plugged in Whether the power plug of the optical drive itself is damaged and whether the power supply is normal, you can use a multimeter to check the hardware problems of the 12V, 5V and other voltage optical drives themselves.

1. The button of the optical drive surface wrench to control the tray to pop up and pop in is out of order.

2. Track in and out of the warehouse.

3. The transmission gear is worn.

4. The transmission belt is relaxed.

5. The movement mechanism is seriously damaged.

Insert the emergency ejection hole with the wire to see if it can be opened.

If not, remove the dust baffle, remove all the external screws of the optical drive, and open the optical drive after taking out the tray a little by hand.

Check the track in and out of the warehouse for foreign objects.

Use a multimeter to check if the eject button is working.

See whether the transmission gear is worn, whether there is foreign matter blocking between the gears, as long as the transmission gear is not particularly seriously worn, it has little impact on the bounce in and out of the tray, and a little lubricating oil can be added.

Look at the transmission belt, if the belt is loose, you can go to the electronic market to buy the same specification of the belt and replace the movement is seriously damaged, not to mention that the electronic market can not buy accessories to open and repair the optical drive requires a certain amount of hands-on ability and electrical knowledge beginners, or be cautious.

Otherwise, if you open it, you won't be able to install it, but it will be troublesome.

Hardware problems within the warranty period are best solved by a dealer.

Is this the case when you double-click? If it is, you double-click it on behalf of auto**, it should be**device is not associated with a good cd, so it will be wrong to open, open the **device settings under association, or right-click to open the way to find the **device icon,Confirm the opening。 Right-click - open should be able to enter the optical drive!

Right-click on my computer--- properties--- hardware--- device manager--- right-click on the CD-ROM, disable it and then rescan the system hardware once, and it should be all right.

You use the right click to open it and try it, if it doesn't work, go to the control panel to find the folder option, select the file type, then find the audio cd, select advanced, then select, then browse, find a ** device to associate on, and then make sure it should be OK.

Dear, I'm glad to be able to your problem, you can refer to the following methods to install CD drive driver on your computer: 1. Find the computer in the computer desktop, right-click, and then select the first one in the toolbar. 2. Select Device Manager in Management.

3. Double-click the graphics adapter in Device Manager. 4. Click Driver in the pop-up box. 5. Update the driver in the driver and click it, click it successfully, and click OK in the lower right corner of the box.

6. In the pop-up window, select the option "Browse your computer for driver software(R)". 7. Click Browse, then select the driver disc of your computer, and then click OK, you can wait for the driver to be installed automatically.

After the computer is turned off, put the CD drive from the outside bezel position, fix it with screws, and then connect the power cable and data cable, and the computer can be used when it is turned on.

You don't need to install the driver of the optical drive. If prompted to install it, you go to the next motherboard driver. Once installed, it should be automatically recognized.

The optical drive is generally installed on the top of the front panel of the case, and the power and data cables can be connected.

If you want to burn a CD-ROM drive, you just need to use the drive disk and insert the CD-ROM drive. The system is generally able to recognize and drive commonly used optical drive devices.

The CD drive is actually what we often call an optical drive, and its function is to read the optical disc inserted into the optical drive. Below I have sorted out for you how to solve the problem that the computer CD drive can't be opened, I hope it will be helpful to you!

The solutions and steps for computer CD drive not to open are as follows

Many optical drives are equipped with an emergency small hole (the specific name may not be this, everyone calls me that, so I will call it), in order to deal with the situation that the optical drive cannot be opened, we can find a paper clip and insert it into the emergency small hole, to see if we can open the optical drive.

If the use of emergency holes still can't be opened, we might as well use some "violent means", when pressing the open button the driver will generally react but can't pop out, at this time we can exert some external force to it to help it open, such as our hands, or some more hard items, remember not to overexert force, it is not good to break the optical drive (I do this when the optical drive can't be opened).

If that doesn't work, we need to open the case and check the data cable connected to the optical drive. First of all, it is natural to check whether the data cable of the optical drive is plugged in firmly, if it is confirmed to be plugged in firmly, to see if it is plugged in reversely, if it is confirmed that it is not plugged in reversely, it is not caused by damage to the data cable, you can find a good data cable to do the verification, if it is confirmed that it is a problem with the data cable, replace the data cable.

Make sure that there is no problem with the data cable, we can come to check the power cable, the same way to check the data cable, the first is to see whether it is plugged in, plug it inversely, and then it is to see if the power cord itself is faulty, we can find a good power cord to do experiments, compare to know whether it is a power cord failure. If it is confirmed that it is a problem with the power cord, replace the power cord.

If you are good at repairing the computer, do not remove the optical drive, repair it yourself, and see if it is the dust that has been accumulated, or the transmission gear is worn or relaxed, or the movement action mechanism is damaged, there is always a reason why the drive cannot be opened, and you can find a solution.

However, many friends don't seem to have the technology and patience to repair the optical drive, if they don't want to trouble then they can only trouble others, we can uninstall the optical drive and send it for repair, and hand the problem to the maintenance master to solve, of course, we need to pay some remuneration to others.

Sometimes the optical drive may be damaged more seriously, even the repair master can not do anything, at this time we have to give up this optical drive, buy a new optical drive, in fact, buy a new optical drive is not much money, and save worry, if your optical drive is broken and you are not bad money, you may as well buy a new one.

On most computers, there are several ways to open a CD drive: Bend the Fallout.

Press the "on/off key" on the front panel of your computer case, which is usually located on the right or left side of the front panel of your computer case.

In the Windows Resource Shed Manager Buried Liquid, locate the CD drive and double-click on it. Generally speaking, you can find the CD drive in a file explorer window such as "My Computer", "This Computer", or "Computer".

Use the physical button to open the computer's CD drive, there will be a small button on the front of the optical drive, press it to eject the CD drive.

In Windows operating system, you can use the shortcut key Win+E to open "File Explorer", then find the CD drive, click the drive icon.