What is the concentration requirement for ozone air disinfection?

At present, the most cutting-edge technology of air disinfection is the hydroxyl radical generator, the products of which are carbon dioxide and water, and will not produce secondary pollution!

It can also disinfect surfaces!

I'll use this product, learn more, ask me!

Ordinary disinfection methods:

01.Air purifier: It is a mechanical ventilation device with a bacterial removal rate of only 24%.

02.Ultraviolet antivirus: Excessive exposure to ultraviolet rays of the sun can cause damage to the human body's **, eyes and immune system.

03.Ozone disinfection: ozone is a first-class gas at room temperature, with poor stability, and can only be produced on site and used immediately. And it must be disinfected unmanned, and at least 30 minutes after disinfection can be entered.

Summary. 1. Air disinfection ozone concentration: 5 mg m3 30 mg m3, relative humidity 70%, the effect will be 30 120min.

2. Surface disinfection: ozone concentration should be 60 mg m3, relative humidity 70%, action time 60 min 120 min.

3. When disinfecting the surface of objects with ozone water: the ozone concentration in the water should be 10 mg l, and the action time should be 60 min.

What is the appropriate concentration for ozone sterilization? How much mg m3

5 mg m3 30 mg m3, relative humidity 70%, the effect is to disinfect the surface of 30 objects: ozone concentration should be 60 mg m3, relative humidity 70%, action time 60 min 120 When using ozone water to reduce the height and toxicity of the surface of objects: the ozone concentration in the water should be 10 mg l, and the action time should be 60 min.

I hope mine is helpful to you, I wish you a happy life, everything goes well, smile often, be happy every day, and be happy every day.

The ozone reference concentration used in the air (1ppm =

Ozone reference concentrations are used in the air.

The ozone concentration cannot be exceeded, which refers to the amount of ozone per unit volume. The mass ratio unit mg l, g m3 is used, and the volume ratio unit is 1%, 5%, etc., and the health department often uses ppm. These units are often used to indicate ozone generator outlet concentrations or atmospheric ozone concentrations.

The national standards for ozone will have different concentration requirements according to different uses, so you should want to know the safe concentration of ozone. The starting point concentration of ozone toxicity is ppm, and the concentration of ozone that can be smelled by humans in the air is ppm, and according to the test results of ozone toxicity to pulmonary function, ppm is proposed as the upper limit of the allowable concentration of ozone. The Ministry of Health has set a maximum allowable concentration of ozone at mg m (ppm).

To detect the concentration of ozone in the air, it is good to buy an ozone detector with the appropriate range and accuracy.

The ozone disinfection time can be disinfected for an hour each time, and the disinfection and sterilization are 2-3 times a week, and it is generally recommended to disinfect once a day, and the ozone concentration is 30 milligrams of liters.

Ozone decomposition timeOzone will decompose into oxygen after sterilization, and the decomposition time is generally about 30 minutes, so it can only enter the disinfection site after 30 minutes after sterilization shutdown.

The air ozone sterilization and disinfection machine uses air as the raw material, and the sterilizer directly sends ozone into the air. It can sterilize and disinfect workshops, locker rooms, vats, closed boxes, etc. Ozone generally works for hours when used for air sterilization and disinfection.

Generally speaking, it is advisable to take about half an hour. Too short is not enough to achieve the effect of disinfection, and too long will have ozone residue. When using an ozone sterilizer, it is best to have no one in it. Because when the ozone sterilizer is working, it will release ozone.

The ozone disinfection time is generally about half an hour, too short to achieve the effect of disinfection, too long will only have ozone residue, in the use of ozone disinfection machine, it is best to be unmanned.

The concentration of ozone in the air is an important indicator of air quality. Stinky potato cover oxygen is a toxic gas that can cause harm to the respiratory system if inhaled too much by the human body. As a result, various countries and regions have issued standards to safeguard people's health and quality of life.

Ozone concentration standards vary in different regions. In China, for example, the national standard stipulates that the hourly average ozone concentration in residential and commercial areas shall not exceed 160 microgram cubic meters, the daily average ozone concentration shall not exceed 100 microgram cubic meters, and the annual average ozone concentration shall not exceed 60 microgram cubic meters. In the United States, the national standard stipulates that the 8-hour average concentration of ozone must not exceed 70 parts per billion (ppb).

Under the strict implementation of ozone concentration standards, the harm of ozone to the human body can be effectively avoided. However, ozone** and the mechanisms of formation vary from region to region, so in practice the standards for ozone concentrations implemented need to vary from place to place. For example, industrial pollution and vehicle emissions can lead to an increase in ozone concentrations, so ozone concentrations in cities tend to be high.

In addition to the regulations and regulations, there are also steps that individuals can take to reduce the hazards of ozone. For example, avoid strenuous exercise in an environment with high ozone concentrations, and choose a cleaner environment for outdoor activities. Strengthening ozone monitoring and control plays a very important role in ensuring people's health and safety.

In short, ozone concentration standards in the air represent an important task to protect people's health and improve their quality of life. It is necessary for all sectors of society to work together to strengthen ozone monitoring and governance, and effectively reduce the impact of ozone on the human body and the environment. <>

The standard range for ozone concentrations in air pollution monitoring is milligrams of cubic meters.

Ozone is a harmful substance, and its high concentrations can have a negative impact on the human body and the environment. Ozone can cause damage to the respiratory system, causing symptoms such as shortness of breath, coughing, throat discomfort, and chest pain. High concentrations of ozone can also affect plant growth and development, reducing crop yields and thus food**.

In addition, ozone is also an important indicator of air pollution. As a result, countries have set standard ranges for ozone concentrations to monitor air pollution. It is important to note that the standard range of ozone concentrations varies with location, source infiltration, season and time.

In general, ozone concentration standards are based on the impact on humans and the environment. In China, there are six emission standards for air pollutants, and ozone is one of them. According to the Urban Ambient Air Quality Standards issued by China's Ministry of Environmental Protection, the daily average value of ozone in the air should not exceed milligram cubic meters, and the hourly average should not exceed milligram cubic meters.

In general, different countries and regions have different monitoring standards and monitoring methods, so the range of ozone concentration standards may be different. However, it is certain that compliance with standard ranges for ozone concentrations is very important to protect human health and the environment. We should be vigilant, monitor changes in ozone concentrations, and take the necessary steps to protect our environment and human health.

The most economical operation is ozone water soluble concentration, and the reaction time is 4 minutes. Ozone is a gas, and only by dissolving ozone into water, so that the water contains a certain concentration of ozone, and maintaining a certain reaction time, can the purpose of sterilization and disinfection be achieved. The commonly used ways of mixing ozone and water generally include bubbling method, jet method, Huaikai shielding, mixing pump and so on.

In order to make water reach a certain ozone concentration, in addition to ensuring that the ozone generator has sufficient ozone production and concentration, it is also necessary to ensure the gas-liquid mixing efficiency. The recommended ct value for the ozone industry is that c is the water-soluble concentration of ozone (mg l) and t is the reaction time (min).