The bottom surface of the iron pot is rusty, what to do 5

The solution to the rust on the bottom surface of the iron pot:

1. Sour vinegar method; Vinegar removes rust. It's effective. Heat the pot first and turn off the heat. Use a rag and dip some vinegar directly to wipe the rust area. Rust usually falls off right away.

2. Washing rice water; The decontamination effect of rice washing water is very strong. Soak it in thick rice water for about 2-3 hours. Boil the rice water, and rub it little by little with an iron rag during the boiling process.

After rubbing the pot, wait for the rice water to boil. The rice washing water is boiled, cooled, and poured out. Rinse with water.

Anti-iron pot rusting:

1. Don't use an iron pot to hold food overnight.

2. Do not use an iron pot to cook soup, so as not to disappear the cooking oil layer on the surface of the iron pot to protect it from rust.

3. When brushing the pot, you should also use less detergent to prevent the 'protective layer' of cooking oil from being brushed out.

4. Wipe the water dry after washing, or boil it on the fire again to boil the water particles attached to the pot dry. Replace.

5. While drying on the fire, add a small amount of oil to make it cover the pot surface into a layer of oil film. Replace.

If you touch the oil, you won't be able to cook, it will smoke, a little rusty and scared, just wipe it off.

1. First of all, let's remove the rust, first pour some baking soda into the rusty pot, and then we add some white vinegar to it. Then stir and stir and there will be a reaction between the two of them. Let them react quietly for five minutes, after which we squeeze some of the usual dish soap into it.

2. Then hit **, don't open it too much, let it heat up slowly. While heating, we scrubbed the iron pot vigorously with an iron brush. After the reaction, the rust on it has become loose, so we can easily remove the rust from it.

3. After wiping it clean, we will pour out the dirty water inside, and then rinse it repeatedly with clean water, and slowly the water will become clear, and we will boil the water in the pot dry, and we can find that the rust has been removed.

3. We have to maintain it below, only after such treatment, the iron pot will not be so easy to rust. First of all, we first turn on the high heat to heat the pot, then slowly turn the pot to the bottom of the object, the bottom will be burned into a gray-blue state, and then we use a very fat piece of pork, hold it with our hands, and then use it to wipe the top of the iron pot repeatedly.

4. This is to coat him in a layer of animal fat. The function is to isolate the air, prevent him from rusting, after applying a layer of weed, we will not use the pot again, let it stand for a day, so that it can be attached more firmly, this is what we call the absolute process of boiling the pot, the average old chef knows this method.

Iron rust is mainly due to two factors: water and air.

In order to prevent the iron pot from rusting, it is OK to prevent these two things from clumping together and working.

Here's how.

1. Simple.

After the iron pot has been used, hang it in a cool and ventilated place. Keep out of direct sunlight.

2. Not used for a long time.

Grease the iron pan with some oil.

Or fry fatty pork, pork rind and other things, then wash the pot with a soft rag, or shredded loofah, etc., and then hang it in a cool and ventilated place. Keep out of direct sunlight.

3. Pay attention to it at all times.

Boil the soup in an iron pot and boil the water, then add some oil.

The spatula doesn't have to be too hard.

Avoid vigorously brushing the pot with hard objects such as steel wool balls.

As long as you follow the above practices, you can basically ensure that the iron pot does not rust.

What should I do if the iron pot at home is rusty?

When you run out, don't brush it too clean, leave a layer of oil, the iron pot is like this, Supor's is still rusty!

Don't worry, I'll do it for you!

The iron pot is an indispensable kitchen utensil, and it is difficult to cook without the assistance of the iron pot. There are many types and brands of iron pots, but no matter what kind of quality iron pots they have, they all have a corresponding expiration date. If the iron pot is too old, it is prone to cracks and holes.

If we find a small hole in the pot at home, how can we fix it? Next, let's take a look at the specific remedies.

Method 1: We can use lard and clay to mash and fill the holes and smooth them out.

Method 2: You can also use pork liver mashed and yellow clay together, and burn it with fire to make up for the leak to be as hard as iron. Method 3: We can put cooking oil, cotton and fine lime powder together, so that the three raw materials are bonded and then used for this bonding.

The cracks and small holes in the iron pot can be used when the iron pot is dry.

Method 4: We can buy aluminum foil stickers and stick them on the broken part of the iron pot.

Method 5: We can use garlic to mash and add egg white to paste the loopholes and fill them when they are dry, which is more environmentally friendly. Method 6:

We can first see where the hole is and then contact the maintenance master, if you can use the curium method at the bottom, if your pot is thick enough, you can also use electric welding, and then use a file to trim it. If it is not the bottom with general soldering, it is okay, and the low temperature there will not affect the use of the iron pot.

The above is the specific solution of how to remedy a small hole in the iron pot, I believe that everyone can quickly learn how to operate and remedy through the introduction of the above content, and I believe that we will soon be able to successfully make the iron pot complete.

The iron pot is easy to rust if it is not stored properly, and it is laborious to use a steel wool brush directly, and the easiest way is to soak it in vinegar for a while to easily remove rust.

Don't worry, I'll do it for you!