The TV never gets into the home page, and it stays on. What can t you do?

Hello, the main reasons and solutions for the TV to keep showing the boot screen are as follows:

1. The TV system has a problem or crashes, causing the TV to crash or get stuck, so the boot screen is displayed all the time; Generally, you can turn off the power of the TV, then turn it back on and on again, and it can return to normal. If the problem still occurs after multiple restarts, you need to contact the after-sales service of the TV and arrange a professional engineer to come to the door to flash the new system for the TV to solve the problem.

2. If there is a problem with the hardware of the TV, the TV will crash when it is turned on and stay on the boot screen; For example, motherboard chip failure, internal circuit failure, processor failure, memory.

Failure, etc., it is recommended to contact the after-sales service of the TV for a comprehensive overhaul to solve the problem.

If at the time of booting, the monitor shows a blue screen and a bunch of characters appear. This is mainly due to the loss of important system files of the computer due to irregular operation when using the computer. Press "F8" when booting up, and select "Last Correct Configuration".

If it doesn't work, you can restore the system with one click.

If the TV can't enter the home page, it may be that the TV system is damaged, and you need to flash the TV to solve it.

If your TV has always been in such a state, you can't figure it out yourself, first ask someone who can repair it to repair it, and if you don't understand it, you can only send the TV to the maintenance department to repair it.

Method 1: Turn off all power supplies, reconnect them, and restart the hardware.

Method 2: Reset the hardware and restart the device. The details are as follows:

1.Turn off the TV and unplug it;

2.Find the reset hole of the TV set-top box, that is, the reset hole, find a toothpick or other thing that can be inserted into the reset hole, and then insert it into the reset hole and keep it still;

3.Reconnect the power and turn on the TV When the TV screen appears, you can release the reset button.

4.Wait for the device to start automatically When the TV box is restored to the factory, you can enter the interface smoothly.

Method 3: If method 1 and method 2 do not work, it is recommended to contact the hardware party directly after sales.

1. There is a problem with the system of the TV, which causes the machine to freeze and crash after booting and stay on the boot screen; You can turn off the power of the TV, restart it, and it can generally return to normal after restarting. If the computer still crashes after multiple attempts, you need to contact the after-sales service of the TV to arrange a professional to come to the door to flash the TV into the new system to solve the problem.

2. If there is a problem with the hardware of the TV, it will also cause the boot to stay on the boot screen; If the TV still crashes when it is turned on after reflashing the system, it can be judged as a hardware failure of the TV, such as the motherboard chip, processor failure, memory failure, etc., and it is also necessary to contact the after-sales service of the TV to carry out a comprehensive overhaul of the TV to solve the problem.

1、There is a problem with the system of the TV, which leads to a long boot time,Generally, the system of the TV can be restored to factory settings to solve:After entering the main interface of the TV,Press the menu key,Enter the system settings,Find the system restore,Press the confirm button to restore the system of the TV to the factory setting state; After the restoration, the TV will automatically restart and return to normal;

2. The hardware failure of the TV leads to a long boot time, including high-voltage package failure, screen failure, internal circuit failure, TV motherboard and its parts failure, etc.; It is generally recommended to contact the after-sales service of the TV for a comprehensive inspection and warranty of the TV.

Hello dear! What should I do if my TV keeps not responding on the homepage? 1. It is generally caused by the system error or crash of the TV, it is recommended that the user restore the system to factory settings, and the problem can be solved; Here's how:

Start the TV and enter the main interface of network TV; Under the main interface, find "System Settings", select and press the "Confirm" key to enter; 2. After entering, find "System Restore", select and press the "Confirm" button to enter; 3. After entering the interface of System Restore, select "Restore Now" and press the "Confirm" button; 4. At this time, the TV will prompt the user to confirm whether to restore the system, and all TV settings will be restored to the factory state; Select "Yes" and press the "Confirm" key to start restoring the system; 5、After the system restore is completed,The TV will automatically restart,It means that the factory reset operation has been completed,Next, the user can use the TV normally。 Hope it helps!

Summary. Hello dear, it's a pleasure to serve you. The TV can be turned on, but you can't get to page 1

In this case, it is mostly caused by system problems. It is recommended that you turn off the power of your TV first. Force the TV to be turned off first, and then turn off the power after it is turned off.

Then reboot the test.

The TV turns on, but can't get to the page?

Hello dear, it's a pleasure to serve you. The TV can be turned on, but you can't get to page 1In this case, it is mostly caused by system problems.

It is recommended that you turn off the power of your TV first. Force the TV to be turned off first, and then turn off the power after it is turned off. Then reboot the test.

2.If you can get into the system, then you can try to factory reset the TV. Perform a factory reset before testing.

3.In addition, it may be that there is a problem with the logic board of the TV. If it's a problem with the logic board, it can also lead to this kind of phenomenon. In this case, you only need to replace the logic board.

Hello, Smart TV.

Stuttering can be caused by several reasons:

Cause 1: Installing too much software takes up a lot of memory.

Smart TV is the same as mobile phones、Computer,It also depends on the configuration,Some TV models do not have a large memory,If you run multiple programs at the same time,The running speed will be slowed down。 It is recommended that when you buy, try to choose a smart TV with memory (RAM) greater than 2G.

Also, there is some rogue software.

At the time of installation,It will be booted up by default,When you watch TV,There are actually several programs running in the background。

Solution:

Usually the number of software in the computer is not too much, various types of software, just pick some high-reputation ones. In addition,You can install a TV management software,Usually clean up more internal junk files。

Cause 2: There is a problem with the network connection (broadband, wireless).

with Wi-Fi. Network disconnection and lag are high-incidence problems in network connection, because as long as the account and hardware are correct, the probability of network fluctuation is not large.

Wireless networks, on the other hand, are susceptible to a variety of factors such as distance, obstacles, router settings, and router quality.

Solution:

First of all, the router choice, the router below 100 yuan, due to quality, configuration reasons, there are many problems in use, it is recommended that you do not be greedy for cheap, to buy a *** router.

Then the router is placed, don't be too far away from the TV, and try not to have a wall between it and the TV.

When there is a wireless network disconnection problem, you can try to restart the router to solve it, after doing this, it still can't solve the problem, it is recommended to contact the network operator, or the TV after-sales service to solve it.

Reason 3: The heat dissipation of the TV is not smooth, which affects the normal operation speed.

Compared with traditional TV,More complex and fine,Turn on and off multiple software in a short time,The load of TV components will naturally increase,If you don't pay attention to heat dissipation,After a long time,TV components will accelerate aging,Not to mention Caton when watching TV,It will also greatly shorten the service life。

Some professionals in the industry pointed out that after the TV temperature exceeds the specified value, the life of the TV will be shortened by half for every 8 increases. Therefore, be sure to pay attention to heat dissipation when watching.

Solution:

The TV is overheated,There are many reasons,One is that it is used for too long,And frequent operation,At this time, you need to let the TV rest a little,Or add a small fan near the TV heat dissipation hole,Help dissipate heat。

In addition, the placement of the TV can also help improve heat dissipation, such as not placing clutter around, keeping air circulation smooth, and being no less than 20cm away from the wall.

In addition, those who often use dust cloths, must completely remove the cloth when watching TV, otherwise the heating problem will be very serious!

Reason 4: TV system incompatibility and system optimization problems.

Solution:

First of all, try to check the version information in the settings to see if you have upgraded to the latest version;

Then use TV cleaning software to clean up cache, system junk, and close irrelevant programs running in the background.

If there is still a problem, it should be an official reason, and it is recommended to contact customer service directly and ask for a remote solution.

Hello, what should I do if the TV has been unresponsive on the homepage?

I've been in a situation like yours a few times, and here's how I handled it:

First, see if you have forgotten the card, because it is all network TV now, and the network is slow and stuck.

Second, is it that the remote control battery is dead, and it is not easy for you to operate it if it is out of power.

Third,Now TVs generally come with set-top boxes,Whether the set-top box memory is full,If it's full, it's easy to get stuck and don't move。

Unplug and turn off the power, let the TV discharge naturally for half an hour before turning it on.

Summary. Reason: If the system cannot be entered due to the crash, the TV can be powered off and turned off, and then powered on again to restore normal; The TV system crashes and the system cannot be entered, in which case it is necessary to contact the after-sales service of the TV; If the hardware of the TV is faulty, such as the failure of the motherboard chip, the processor or the memory, etc., it is also necessary to contact the after-sales service of the TV for maintenance; The system fails, and the data is re-flashed.

The TV turns on, but can't get to the page?

Reason: If the system cannot be entered due to the crash, the TV can be powered off and turned off, and then powered on again to restore normal; The TV system crashes and the system cannot be entered, in which case it is necessary to contact the after-sales service of the TV; If the hardware of the TV is faulty, such as the failure of the motherboard chip, the processor or the memory, etc., it is also necessary to contact the after-sales service of the TV for maintenance; The system fails, and the data is re-flashed.

After turning on, there is a little bit of boot and boot ads, but the ads don't end and they crash.

You can't access the interface.

Hello dear, is it dead or no signal?

If the TV screen does not move, it may be a set-top box malfunction. You can turn off the set-top box, remove the user card in it, and reinsert it to turn it back on. If it doesn't work, it may be that the external signal is faulty.

See if the neighbor's TV is the same phenomenon. If it's the same, it'll be fine later. If your TV is not using a set-top box, turn it off and restart.

Television refers to a device that uses electronic technology to transmit active image pictures and audio signals according to the visual persistence characteristics and visual psychology of the human eye, that is, a television receiver. It is also an important broadcasting and communication tool. The basic system of a television set consists of three parts: camera, transmission and development.