Flute 4 Hair Deficiency Others do not make Deficiency

4 is indeed easy to get weak, that's because the small screw that controls 4 is not good, I have been playing the flute for many years, and this often happens.

1. It may be that your breath is not adjusted well, and this requires a lot of long tone practice.

2. The problem of the musical instrument may be an air leak, just see if you can press it strictly.

Look at the keys one by one to see if they are strict Remind you that all the keys that should be closed should be looked at

The little screw on it is loose.

That's when the key of the little finger of the right hand is loose.

Let the teacher give you a tune.

It is also possible that the direction of the breath is leaking.

It may be that the mouth style is not well controlled, pay attention to the mouth shape.

Yah First of all, you can check the seal of the keys, and if there is no problem, then remember that if you want the flute to produce a rich and beautiful tone, let your flute vibrate sufficiently. The principle of the flute is to make the incoming air rotate downwards and pass through a confined space to make it vibrate and make sounds.

Well, the fa sound could be a conversion tone on your flute. It's not that the higher the tone, the more forward the blowing point is. You can try moving the breath back a bit and try to blow the breath into the flute sufficiently.

You can feel it, and if you're blowing in the right direction, all the fingers holding the key can feel the vibration!

Screws, or the mat under the flute is broken, if it weren't for the technical problem

Wipe it clean and put it back in the box after each blow, just don't get wet. If you put it out often, it will definitely turn black.

You can find a flute seller, they can tell you.

It depends on what kind of material your flute is made of, if it is a nickel flute, it is not very useful to wipe it with a silver cloth.

But if it is a silver flute, you can try it with a silver cloth at home, and wipe it off with a silver cloth for slight oxidation; If it is a little more serious, use a silver cloth dipped in a little water, wipe it a little harder, and wipe the flute dry with the silver cloth (then you will find that the silver cloth becomes very dark, but the flute is bright.) (Strongly discouraged from using toothpaste!) Unless you're going to abuse your flute)

Alternatively, you can take your flute to the shop and have a professional flute technician take care of it. They cleaned the flute so thoroughly that they could wash off the oxide from all parts of the flute, including the inside of the pipe wall. It also comes with services such as oiling your flute, adjusting the mat closure, and so on.

It is very important to protect the flute, try not to expose it to the air when it is not blowing. Every time you practice the flute, you have to wipe the flute clean (inside and out). In addition, it is necessary to tune the flute every two years or so.

You should have your flute serviced regularly, you can send it to the manufacturer, they do it well, that's how my flute is maintained. In addition to wiping the flute for you, they will also polish the flute. It works very well.

You can wipe it with toothpaste, it will be much brighter, but it may also wipe off the silver paint on the surface. Rinse with water after wiping with toothpaste.

Wipe it with toothpaste, and if it's old, it can make sure that the wood is good, and you can soak it in salt water.

I'm connected to you in pain! ~~

I saw my flute teacher have a bottle of cocoa-like that brightens when I touch the flute, but it won't be long before it returns to its original shape. So you're still like me, work slowly and brighten our flutes! Come on!

Actually, I was also taught by others

If you apply a small amount of toothpaste to the surface of the flute and rub it vigorously with silk, a towel, or gauze, it will really become bright!

Don't believe it, give it a try! ^-

There are two ways to do this.

1.Go to the musical instrument store for maintenance, Beijing is about 180 yuan, remind him to help you wipe it will be the same as new.

2.I bought a professional silver cloth (jewelry stores and musical instrument stores have it), and then I used to wipe it with an alcohol cotton ball, and the effect was average.

In fact, the black flute does not affect the timbre.

Wipe with silver polish and silver cloth.

The piano shop sells them, I just wiped them a few days ago, and it works.

When I was a child, my teacher taught me.

Rub with toothpaste. But if it's gold-plated, forget it. It is easy to wear and tear the surface of the site.

When wiping, the toothpaste should be put in moderation. It is recommended to use a soft cloth material.

If you have gold plating, you can rub it lightly with a soft cloth material made of alcohol. Above.

Wipe it with Yamaha's silver oil, and if it doesn't work, take it to the piano shop for repair.

Some of them are repaired, about 300.

The outer surface of your flute is oxidized, and the blackened thing is oxidized silver, you can go to the piano store and buy a silver cloth specially for polishing wind instruments, if the piano shop doesn't have it, you can buy it online.

The silver cloth of the piano shop is 15-20 cm square, the small one is about 10 cm square, and the ** is 8 yuan to 30 yuan, depending on the size and brand.

The silver cloth sold online, I have seen about 8 centimeters square, **5-8 yuan or so (not counting freight), this kind of silver cloth is mainly used to wipe silver jewelry products and the like, it can also be used, it is said that there are domestic and imported from abroad, but I have not used it, I don't know how the effect is.

That's silver vulcanization, you just have to go to the musical instrument store and find a professional to repair and maintain it.

Then you can only go to the musical instrument store and ask if there is a "silver water" for wiping the flute, but I don't know if this thing is sold now, you can also look it up on the Internet. Otherwise, the master who wants to repair the instrument will help you dismantle it, but this is to give money. And it must be a professional flute master.

Also, you can find your flute brand company and send the instrument to the company for maintenance. It's just time-consuming and costly. In fact, the flute must be wiped inside and out every time it is used up, so that the flute is not only beautiful, but also has a longer service life.

yamaha221 said very well, it depends on the material of the flute, and it is also strongly opposed to the use of toothpaste.

Easy way: Rub with toothpaste!

Low, midrange: 1234 in the left hand, (7 with thumb press), 45 in the right hand.

Treble: 124 in the left hand, (7 in the thumb), 45 in the right hand.

Midrange Low: Left Hand 1 (Single Key), 2,3,4 Right Hand 3 4,5

Treble: Left hand 1 (single key), 2,4 Right hand 3 4,5

It is recommended to use 4 keys for the right hand, and the tone is more accurate.

Press the ring finger with the right hand, and press the thumb, index finger, middle finger, and ring finger with the left hand.

Look at the first picture here The first one is the mid-bass range, 8 is used for MI to rise FA tremble

Put the middle finger of the left hand in the treble area.

Fork 4 is to re-rise 4, which is equivalent to raising one note on the basis of 4, and pressing the 5 key is to re-rise 4

Re-ascend 4, that is, 5 fingering, the right hand except the little finger, the others are not pressed, and the left hand is pressed except the little finger.

In fact, you don't have to take the test level by level, you can skip a grade, as long as you practice the tune well, and if it's a **** college, you have to take the music base, I studied for a year and took the fourth level.

6262+56+ flute left thumb, index finger, ring finger, right ring fingerThe treble fa will put.

Just let go of the index finger of your right hand. It's up.

In the order of thumb 1 and little finger 5.

Left hand 124 Right hand 45 Alto flat 4 on the basis of fingering Open the middle finger of the left hand.

The treble fa will put.

Just let go of the index finger of your right hand. It's up.

In the order of thumb 1 and little finger 5.

Left hand 124 Right hand 45

Alto 4 is based on the fingering of the left hand with the middle finger open. The right index finger is replaced with the ring finger.

Left thumb, index finger, ring finger, right ring finger.

Left hand: thumb, index finger, ring finger;

Right hand: index finger, little finger.

I used silver polishing paste, this one can be wiped thoroughly, but the flute needs to be completely disassembled.

I wipe it thoroughly every time I blow it, so I basically only need to get the silver paste once a year to keep it looking like new.

Because most flutes are silver or silver-plated. So if you don't wipe it in time, it will oxidize and turn black, it turns out that there is a boy who studied with me, and every time I don't wipe it well, the flute will be black and it will not be the same

The teacher also said that he was studying the black pipe.

Every time I blow it, I use a flute and a cloth to wipe the outside and the inside, and there are no fingerprints on the surface or something, ag+o=ag2o?

But if it's already dark, it's useless to wipe it yourself.

But you can get it to the piano shop and ask them to clean it up for you.

With a silver cloth!! Yamaha's is very easy to use, but it is recommended that you take care of it, and the silver cloth is somewhat corrosive, so it is better to use it less.

There are two reasons for this.

One is that there is a problem with the flute.

The second is that something is wrong with you.

Are you new to learning? If so, pay attention to your mouth shape, it may be a leak, just start learning like this, practice more, it will be better.

But if there is a problem with the flute, it is best to go to a professional to see, but it is generally not like this, at most a few keys are broken.

The way it is played is not right, or it is the problem of the flute itself.

When blowing, the mouthpiece and mouth should be at 45 degrees, otherwise your flute is broken.

If there is an air leak, if you look carefully at the joint of the mat, you can find the problem.