Who knows the specific price of Epson s Happy Printing Device Solution 10

Epson printers should be familiar to everyone, it is a veteran printer in the field of printer brands, and it is a brand that has entered the R&D and manufacturing of printers early. But you may not know much about Epson printers** and how to use Epson printers at home. To this end, we will bring the Epson large printer ** table, as well as how to connect the Epson printer to wifi, etc., to popularize the price and use of the Epson printer.

1. Epson large printer ** table.

There are many models of Epson printers, and according to different models, the most important aspects of the printer are also different. For Epson large printers** how much, according to the specific model, the following is a list of some Epson large printers** for reference.

Second, how to use a home Epson printer.

1. The printer is connected to the host.

Connect the printer to the host computer, turn on the printer, and enter the "Printers and Faxes" folder through the "Control Panel" of the console. Right-click in an empty space and select the Add Printer command to open the Add Printer wizard window. Select Local printers connected to this computer, and select the Automatically detect and install plug-and-play printers check box.

2. Install the Shensan printer driver.

At this point, the console will detect the new printer, and soon it will find the connected printer, and follow the prompts to put the driver disc that came with the printer into the optical drive. Once the driver for the printer is installed, the printer's icon appears in the Printers & Fax folder.

3. Set the printer parameters.

Right-click on the icon of the newly installed printer, select the "Share" command, open the printer's properties dialog box, switch to the "Share" tab, select "Share this printer", fill in the name to be shared in the "Share Name" input box, such as compaqij, and click the "OK" button to complete the sharing setting.

3. How to connect the Epson printer to wifi

1. Turn on the printer.

First, plug in the Epson printer and power it on, and after the self-test is completed, you can set it up. If the user's home wireless router comes with WPS or QSS capabilities, it is much simpler.

2. Connect to the local area network.

Connect through the WPS or QSS wireless router button, power on the wireless router, and when the indicators on it flash alternately, the router has been officially started. Press the Wi-Fi button on the fuselage for 3 seconds, the left Wi-Fi indicator starts to flash red and green alternately, and the printer configuration is completed when the red light and green light are on normally.

3. Install the driver to print.

If you haven't installed the printer driver, please log in to Epson**** driver installation, follow the on-screen prompts to complete the driver installation and settings, when the "Connection Type" interface appears, please select "+ Other Computer", follow the on-screen prompts to automatically configure the printer and port settings, and after the configuration is completed, you can achieve Wi-Fi wireless printing and.

This printer uses friction feeding, which will affect the strength of the printer if the paper is thick or the surface is smooth.

First, make sure that the paper is loaded correctly as follows:

1.The paper is smooth and free of curls or wrinkles;

2.Open the paper holder, pull out the extension, and slide the paper holder destruction key backwards to tilt it;

3.Facing the printer, slide the left rail of the feeder section to the left;

4.Using the Rear Feeder: Loads paper face up along the right rail of the feeder; Using the bottom tray: Load the paper with the printable side down aligned size mark.

5.Use a slide rail to card the main paper, but not too tight.

Secondly, please perform the self-test of the Slim printer as follows to confirm whether the printer has a hardware failure:

1 Make sure both the printer and the computer are turned off;

2.Disconnect the cable from the printer's interface connector;

3.Load a sheet of A4 size plain paper in the correct way in the feeder;

4.Press and hold the Stop Maintenance button and then press the power button to turn on the printer. When the printer is powered on, release both buttons.

Normally, the printer will feed paper and print the selftest page. Confirm that the printer is feeding and printing properly. If the fault persists.

75 g sqm (20 lb); The envelope weighs 75 g m² (20 lb) and 90 g m² (24 lb).

The movement is stuck, hurry up and check it!

This has never happened before. You can restore the system and reinstall the printer driver.

This should be the reason for the cartridge! Show that you've run out of cartridges!