-
Anonymous users2024-02-06C5 (F5) valve is made of alloy steel.
The operating temperature is 29 650 °C, and the main applicable media are steam, petroleum products, etc. (mainly used for high temperature and high pressure valves).
Valve material classification:
Carbon Gang: 1, WCB (A105), the use temperature is 29 427, the main applicable medium is water, steam, air, and petroleum products.
Alloy steel: 1, WC1 (F1), the use temperature is 29 454, the main applicable medium is steam, petroleum products, etc. (mainly used for high temperature and high pressure valves).
2, C5 (F5), the operating temperature is 29 650, the main applicable medium is steam, petroleum products, etc. (mainly used for high temperature and high pressure valves).
3, WC6 (F11), the operating temperature is 29 552, the main applicable medium is steam, petroleum products, etc. (mainly used for high temperature and high pressure valves).
4, WC9 (F22), the use temperature is 29 595, the main applicable medium is steam, petroleum products, etc. (mainly used for high temperature and high pressure valves).
Stainless steel: 1, CF8(304), the operating temperature is 196 800, the main suitable medium is nitric acid.
corrosive media.
2, CF8M(316), the operating temperature is 196 800, and the main applicable medium is acetic acid.
and urea. and other corrosive media.
3, CF3 (304L), the operating temperature is 196 425, the main applicable medium is nitric acid and other corrosive media.
4, CF3M (316L), the operating temperature is 196 455, the main applicable medium is acetic acid and urea and other corrosive media.
Carbon steel for low temperatures:
LCB (LF1), the operating temperature is 46 345, the main applicable medium is steam, petroleum products, etc. (mainly used in cryogenic valves).
-
Anonymous users2024-02-05Here are some of the well-known brands recognized in the valve industry, which are widely recognized and have a high reputation. While rankings may vary depending on time and market conditions, the following brands are generally considered to be among the top brands in the valve industry:
The following influential first-line brands of water system valves and industrial valves can be used as a reference, but for reference only: Suzhou Neway Valve, Shanghai Guanlong Valve, Shanghai Qizhong Valve, Sanhua, Su Yan, Shentong, Su Valve, Nanfang, Jiang.
First, the word Yao. The above manufacturers are only estimates and references, and the specific situation may vary or fluctuate at any time due to changes in a series of factors such as changes in the market, the size of the competition pattern, and the stability of product quality. As an indispensable key device in industrial production and civil facilities, the quality and reputation of the valve brand directly affect the satisfaction and trust of users.
These brands are known in the valve industry for their innovative technology, high-quality products and reliability. It is important to note that the market and industry are evolving rapidly, and different rankings may vary depending on time and region. For the most up-to-date ranking information, it is recommended to refer to industry reports, professional organizations or market research data for more detailed and accurate information.
-
Anonymous users2024-02-04F5 is not a material code, it is a shape.
That's how it should be.
-
Anonymous users2024-02-03F5 and F4 mainly refer to the structure of the German standard gate valve
-
Anonymous users2024-02-02The valve F6 is made of martensitic stainless steel.
Martensitic stainless steel, which can adjust its mechanical properties through heat treatment, is a class of hardenable stainless steel. Typical grades are CR13 type, such as 2Cr13, 3Cr13, 4Cr13, etc. After quenching, the hardness is high, and different tempering temperatures have different combinations of strength and toughness, which are mainly used for steam turbine blades, tableware, and surgical instruments.
According to the difference in chemical composition, martensitic stainless steel can be divided into two categories: martensitic chromium steel and martensitic chromium-nickel steel. According to the different structure and strengthening mechanism, it can also be divided into martensitic stainless steel, martensitic and semi-austenitic (or semi-martensitic) precipitation hardening stainless steel and martensitic aging stainless steel.
-
Anonymous users2024-02-01American standard material, martensitic stainless steel forging grade.
-
Anonymous users2024-01-31High-strength steel used to make valve stems.
-
Anonymous users2024-01-30The valve stem F6A corresponds to the national standard 1CR12 or 1CR13.
Stainless steel: 2Cr, Cr, Cr17Ni, Cr18Ni, 12Mo2Ti and other materials are generally selected. 2Cr CR13 stainless steel is suitable for water, steam and weakly corrosive media with nominal pressure less than or equal to 32MPa and temperature less than or equal to 450 degrees, and the surface can be strengthened by chrome plating, high-frequency quenching and other methods. 1CR17Ni2 stainless steel valve, cryogenic valve, can resist corrosive media.
1Cr18Ni9Ti and 1Cr18Ni12Mo2Ti stainless acid-resistant steel are used in high-temperature valves with nominal pressure less than or equal to 600 degrees, and can also be used in stainless steel valves and cryogenic valves with a temperature less than or equal to -100 degrees. 1Cr18Ni9Ti can resist corrosive media such as nitric acid; 1Cr18Ni12Mo2Ti can resist corrosive media such as acetic acid. When 1Cr18Ni9Ti and 1Cr18Ni12Mo2Ti are used in high-temperature valves, nitriding treatment can be used to improve the anti-abrasion performance.
-
Anonymous users2024-01-291. The F6A of the goal ball valve belongs to forged low alloy or stainless steel alloy in terms of material, which is the corresponding code name in the United States.
2. There are generally two models corresponding to this material in China, specifically 1Cr13 and 2Cr13.
-
Anonymous users2024-01-28It is what we commonly call the CR series stainless iron material.
However, they are generally 1cr13 and 2cr13
-
Anonymous users2024-01-27It is a forged low-alloy or stainless steel pipe fitting used in the high-pressure system in the United States.
Corresponds to 1cr12 or 1cr13 of the national standard.
-
Anonymous users2024-01-26F51 is a duplex stainless steel with twice the strength of austenitic stainless steel.
Chemical Composition: C Mn Si P s Cr NiShanghai Xiangqia metal team, looking forward to your consultation!
Duplex stainless steel composed of 21% chromium, molybdenum and nickel-nitrogen alloys. It has high strength, good impact toughness, and good overall and local resistance to stress corrosion. Duplex stainless steels have twice the yield strength of austenitic stainless steels, a feature that allows designers to reduce weight when designing products, giving this alloy an advantage over 316,317L.
This alloy is particularly suitable for temperatures ranging from -50°F to +600°F. This alloy can also be considered for applications beyond this temperature range, but there are some limitations, especially when applied to welded structures.
Duplex stainless steel has twice the compressive strength compared to austenitic stainless steel, and designers can reduce its weight compared to 316L and 317L. Alloy 2205 is particularly suitable for the -50°F +600°F temperature range and can also be used at lower temperatures in tightly restricted situations, especially for welded structures.
Applications:
Pressure vessels, high-pressure storage tanks, high-pressure pipes, heat exchangers (chemical processing industry).
Oil and gas pipelines, heat exchanger fittings.
Sewage treatment system.
Pulp and paper industry sorters, bleaching equipment, storage and handling systems.
Rotary shafts, press rolls, blades, impellers, etc. in high-strength and corrosion-resistant environments.
Cargo boxes for ships or trucks.
Food processing equipment.
-
Anonymous users2024-01-25F51 is a duplex stainless steel forging grade.
The corresponding pipe and plate grade is S31803, and the hardness of S31803 is less than HB293 in the standard of pipe SA312 and plate SA240. At lower C contents, the CR content is 18% to 28% and the Ni content is 3% to 10%. Some steels also contain alloying elements such as Mo, Cu, Nb, Ti, N.
Compared with ferrite, this kind of steel has the characteristics of austenitic and ferritic stainless steel, higher plasticity, toughness, no brittleness at room temperature, significant improvement in intergranular corrosion resistance and welding performance, and also maintains the 475 brittleness and high thermal conductivity of ferritic stainless steel, with superplasticity and other characteristics. Compared with austenitic stainless steel, it has high strength and significantly improved resistance to intergranular by-product and chloride stress corrosion. Duplex stainless steel has excellent resistance to pitting and corrosion, and it is also a nickel-saving stainless steel.
It is mainly used in the production of acid oil and gas wells.
F11 is equivalent to GB T3077 15CRMO of the national standard, and its chemical composition content is as follows: CMN
sicrmoni ≤
p ≤s ≤
-
Anonymous users2024-01-24F51 is called 022Cr22Ni5Mo3N duplex stainless steel new grade, the old grade 00Cr22Ni5Mo3N, F11 domestic called 15CrMo alloy steel, duplex stainless steel, China grade is 00Cr22Ni5Mo3N, the American grade is UNS S31803 F51 S32205 2205 F60, material number:
Grade: X12CrNIMON225
Standard: DIN 17400
Stainless steel. Features & Applications:
X12CrNimon225 stainless steel, German DIN standard stainless steel.
Chemical Composition: Carbon C:
Silicon SI:
Manganese mn:
Phosphorus p: sulfur s:
Chromium Cr:Molybdenum Mo:
Nickel ni:vanadium v:—
Nitrogen n:
-
Anonymous users2024-01-23It is forged molybdenum steel
Boot requires pressing F1 to enter the system troubleshooting. >>>More
I can only say that this is impossible, you may read the kind of roadside magazine tabloid or something, because you send it with a mobile phone, there is no condition to copy the data, just give a few characteristics to compare, radar, from the electronic equipment, China is a horse can not catch up with the United States, the second generation aircraft and the fourth generation aircraft are even more incomparable, that is to say, the F22 will definitely be able to detect the J-8 early, plus the F22's stealth ability ......Medium-range air combat is basically one-sided, and the J-8 does not seem to be equipped with Thunderbolt 10 missiles, that is to say, it does not have over-the-horizon combat capabilities at all, so it is only beaten and does not fight back. Entering close combat, the F22 with supersonic cruise capability can definitely enter a good position earlier than the J-8, equipped with a vector nozzle engine and the F22 with a good aerodynamic shape has better maneuverability than the J-8 with a high-altitude and high-speed volley design concept, and will definitely be equipped with a helmet aiming system with AIM-9X, a missile with an off-axis angle of 90 degrees, that is to say, you don't need to put the nose of the aircraft at you when launching,. To sum up, what do you think are the chances of J-8 winning F22. >>>More
Your question is too broad. There is no specific description of some of the related symptoms. >>>More
There could be several reasons, try the following workarounds: >>>More
Press the F1 button on boot, this is because you do not have a floppy disk drive installed, but you have set the option to turn on the floppy drive in CMOS. >>>More