Wireless network installation problems SOS!!

1, the landlord don't panic, the wireless network is the need for professionals to go to your home to press, will give you a similar to a U disk thing, the specific steps are not easy to say, you can play the wireless network network operator's **consultation,**It seems to be 10086,Find manual service,If you have a professional**, it's better.。。

2,1) Your machine is a desktop or notebook, it supports wireless network, there is no wireless LAN module inside, the notebook basically supports it, if it is not supported, you can only go to the market to buy a wireless module (wireless network card).

2) Wireless Internet access must have a wireless network, whether your home network has a wireless router or use Unicom, mobile wireless network, if it is Unicom or mobile wireless network directly connected to enter the account password to access the Internet. If it is a wired network, it must be converted through a wireless router to access the Internet through a wireless network.

3) The wireless router settings generally have a manual when buying, adjust according to the relative instructions, and the wireless network must be set with a password, and its own independent name, so that the machine is easy to find.

Are you a desktop? It's still a book.,You don't know what you're saying.。

After using the route, the route is automatically connected, and the computer does not need a broadband connection.

1. First use the computer to directly connect to the TP-LING route, and change the LAN port IP of the route first, such as changing, probably like this:

2. Change the name of the wireless here, encrypt the wireless:

3. Then enable the DHCP server

4. OK, exit, and then reconnect the network cable, and you can get on.

1.First make sure whether your company's network has DHCP service enabled, method: the computer is connected to your company's network, and the IP is set to automatically obtain, if you can access the Internet normally, it means that the DHCP service is enabled.

2.Change the login IP address of the TP-Link route to Disable DHCP and set the wireless password.

3.The network cable is connected to the LAN port of the TP-Link wireless router, and if the company network has DHCP service enabled, it should be able to connect to the wireless Internet normally. If the DHCP service is not enabled, mobile phones and laptops need to manually specify an IP address to access the Internet.

1.First of all, make sure that your router access IP is, yes.

2.Some routers require you to set the IP address in the local network connection to be automatically obtained, and it is possible that your current status is set to a fixed IP. There are also some routers that need to be set in the local network connection to set the fixed IP of the same segment as the router access IP, fill in one at random, for example).

3.The inability to connect has nothing to do with the fact that you were blocked by Cha Rutong before, it is just blocked by your original network operator, not all operators will be blocked, and moreover, you don't need to connect to the network at all when you set up a ruined router, you only need a computer to connect to the router.

After entering the router, follow the prompts of the setup wizard, select the PPPoE dialing method, and enter the broadband username and password in the next step, paying attention to the case. The next step is to set the wireless SSID and wireless password, and restart the router after completing the settings.

Some models of routers need to select the parameter settings on the left again or call the WAN port settings in the advanced settings, select the dial-up rolling mode as the normal dial-up mode, and select the connection mode as automatic connection and save.

For other settings, you can see whether Enable Wireless is checked, and select an encryption method in Wireless Security.

Router Settings Legend:

f11 displays the menu bar.

The system has been reinstalled, have you reset the account password?