How to make a kite? How to make a kite

It's best to find a teacher to learn.

The first step of the process of making a simple kite is to go to the store to purchase the main materials, such as: 2 ordinary newspapers (one of which is spare), a pair of scissors, a ring knife (auxiliary), a roll of transparent tape, a piece of paste, a roll of fishing line, slender bamboo strips or go to the suburbs to cut slender bamboo strips, generally the same size as curtain bamboo strips (the size is cut according to the size of their own production, we used curtains or door curtain branches back then).

The second step, when all the materials are ready, the next step is to cut the newspaper according to their actual needs to cut the appropriate kite size, personally think that the most suitable to make a square of 600mm long * 600mm wide or 800mm * wide 800mm, because the size is about the same size as an ordinary large newspaper.

The third step is to cut 2 slender bamboo strips of about 1 meter and make them into a bow shape using a fishing line, one is used to make a bow skeleton, and the other is used to be perpendicular to the bow frame, which is actually the same principle as a finished bow and arrow. Then, the two ends of the bow and the square are fixed with transparent tape (you can also directly cut five to eight pieces of newspaper with a length of 5cm * width of 5cm, and fix the two ends of the kite, the front end and the tail end with paste).

How to make a kite is as follows:

1. Make 2 wooden strips, one 60 cm and one 50 cm.

2. Draw a line in the middle of the 50 cm strip and carve a small opening to facilitate the fixing of the back.

3. Make a cut at both ends of these 2 sticks. Brush it with your favorite color.

4. To make a tassel tail, use a ruler and a craft knife, a paper strip about 3 cm wide and 20 cm long is OK.

5. Roll it up with a rice stick, wrap it, and then wrap it with tape. After tying it, pull out the stick (keep the hole where the stick was drawn) and repeat for 2 tails.

6. Use the 60 cm strip of wood to catch a mark at 15 cm and make a fixed point. Tie it in the marked place. Tie with x.

<>8. Find a piece of paper that is large enough (if it is not enough, you can put together one), the paper should be stronger, and then draw a line with the edge of the pencil, and then leave a width of about 3 cm to draw a folding line.

9. The lines of the four corners are drawn according to the picture. Fold the extra paper by the edge of the rope. Then the potatoes are already glued with tape.

10. Finally, paste the joint point with tape. Thread the thread from where the tassel has just passed, and repeat it several times until you make sure the tassel is firmly tied. Leave about 20 cm of thread on the head.

11. Tie another 2 tails. Tie the tassel tail to the bottom of the kite. Tie a double knot and fix it firmly.

Punch the first hole 15 cm along the bottom of the kite 60 cm that wooden strip. The second hole is below the intersection of the two strips. Use a handmade knife to carve spring hands or holes.

12. Connect the 2 lines together and tie a slipknot so that you can adjust the angle of the kite. And so it was.

The process of making a kite is as follows:

Preparation materials Tools: newspaper, scissors, bamboo skewers, tape, rope.

1. First of all, we must be familiar with the construction and preparation materials of the kite.

2. Choose a light newspaper and draw a square on it. Use scissors or a handmade knife to cut the square.

3. The square is at a right angle upwards, and bamboo sticks are placed on the vertical diagonal line to form the backbone of the kite. The long bamboo skewers are used as the backbone, and the short bamboo skewers are used as the beam bones.

4. Place another bamboo stick horizontally as a beam bone, perpendicular to the spine. Place on the top half of the piece of paper, not on another diagonal. The beam bones should be bisected vertically with the spine. Secure the intersection of the two bamboo skewers with string and tape. It is stronger with all-purpose glue.

5. Garlic then use a rope to connect the four ends of the spine and the beam bone, fix them on the paper, and cut off the paper outside the bamboo stick. At this point, a diamond shape should be formed.

6. After the basic outline of the kite is done, it is reinforced with tape in the center and four corners.

7. Poke a small hole around the intersection of the beam bone and the spine.

8. Use a rope to pass through the four small holes and connect them, so you don't need to tie them too tightly. This makes up the string of the kite.

9. Install a strip of cloth at the tail of the kite as the tail. The tail enhances the stability of the kite.

10. Connect a long rope on the lifting line as a flying line, and the tail end of the flying line is wound around the kite shaft.

11. This makes a kite.

Kite-making steps.

1. Materials needed to make kites: shaved bamboo strips, rainproof paper, spinning thread, glue, oil brushes, crayons, scissors.

Second, the diamond kite method:

1. Divide the bamboo strips into three kite backbones of different lengths, with lengths of 32 cm, 45 cm and 60 cm respectively;

2. The kite skeleton is built into a "dry" type, and the intersection is tied firmly with a binding line, which must be tied in turn in a counterclockwise or clockwise direction, and fixed with "502" glue;

3. Glue the rainproof paper with white latex on the backbone of the kite, and draw a pattern on the paper;

4. Tie the flying line on the surface of the kite, and tie it upper, middle and lower.

3. Precautions for making kites:

1. What kind of kite to make, draw it in proportion, and make the bamboo strip into the kite backbone in proportion, the less the skeleton of the kite town, the better, which can reduce the weight of the kite;

2. The binding line of the kite skeleton intersection should be tied in turn in the counterclockwise or clockwise direction;

3. When the paper is pasted, that is, the rainproof paper is glued to the kite skeleton, the paper should be reserved for one centimeter, and the excess paper on the side should be cut off after the paste is well dried.

4. Precautions for flying kites:

1. Grasp the direction of the wind when flying a kite. When the wind is strong, it is released, and the wind is small.

2. Pay attention to safety and protection of the kite when flying. When flying kites, regardless of the size of the kite, it is advisable to wear gloves to prevent the palms or fingers from being cut or strained by the kite string.

3. When the kite potato silver stops flying to the ** line, you can't be in a hurry, and you should also pay attention to safety. It is easy to tear the string too quickly or cause damage when the kite is about to land, and sometimes it can be cut by the string of several trips if you are not careful. Small or slightly larger kites can be reeled by one person.

4. When rewinding the line, we must pay attention to the protection of some kites with fine workmanship and complex production, and gently hold the kite before the kite lands to prevent it from falling to the ground and breaking or scratching. Another easy way: with a thin bamboo skewer:

2 long (40-50 cm, cross as the skeleton), 4 short (around the border, make a rectangle of more stable balance) firmly tied (with fine wire, or with strong glue to ensure strong viscosity), paste paper, the selection of paper should be tough, not thin and not brittle, paste strong along the border, ensure that the paper is complete and flat in the process, and can not be a little damaged, otherwise it will not fly; Glue the tail, use two lighter papers, about 5-8 cm wide, between 3 meters and 10 meters in length (longer if there are special needs), and the two are glued to the left and right ends on the same side of the main body (if the main body is rectangular, glued to the shorter side), to ensure that the length of the two tails is equal after gluing. Tie the line, the four ends of the line are fixed at the four corners of the main body, lift in one place (make the line a quadrangular pyramid) and tighten it in the hand, knot it (the line should be pulled positively, to ensure that the strength is average) to tie the kite line, and it is completed.

Making a kite is simple.

The first thing to do is to have tools and materials

Personally, I make an octagonal kite, you know the pentagram.

Octagonal is three more corners.

The material is eight thin bamboos draped to be the same length.

And glue. Eight bamboos are draped together into an octagonal shape

Glue the white paper with glue

Do the same thing for everything else.

What is Kite?

There are many names for kites, and they have different names in different countries, different times, and different regions. Ancient Chinese kites were called wooden kites because they were made of wood. After using paper paste to call the paper kite, the next five generations named the kite, followed to this day, but the folk still have the name of kite, harrier.

In the north it is called a paper kite, and in the south it is called a harrier, which is said to be a harrier in the south and a kite in the north.

Japanese kites were introduced from China and originated from the cloth kite "phoenix scarf" that used to exist in China. In English, kite means kite or kite; The German drache means the same as the Chinese word for "dragon"; The Spanish kite comteta means comet.

So what is a kite? A kite is a man-made object that is controlled by wire traction and flies through the air with the help of the wind. The basic definition of a kite at this time.

Kites are used for viewing and flying, and kite flying is a sporting recreational activity, and from this point of view, kites are a kind of entertainment toys. Kite artists in northern China often say that kites are flying machines created with their own hands, which also reflects the entertainment nature of kites. The characteristics of a kite can be seen from the definition of a kite:

A kite that is heavier than air; The kite itself has no power; To rely on the traction of the line to fly; Kites can only take off if there is wind.

A brief history of kites. Chinese kites have a long history, and it is said that Han Xin, a general of the Han Dynasty, used kites for measurement. Emperor Wu of Liang used kites to transmit messages, but was unsuccessful. In the North and South Korea, there were people who jumped from a high place with a kite on their backs and did not fall to their death.

When Zhang Pi of the Tang Dynasty was besieged, he used a kite to send a message for help, and he succeeded. These show that the history of Chinese kites is at least 2,000 years old. From Don?

The practice of ordinary kites is generally to use bamboo as a skeleton and paper as meat.

Bamboo is the main material used to make kite skeletons. Bamboo with a wall thickness of 3 5 cm was selected and cut into bamboo chips, and the toughness of the bamboo pieces was used to make the skeleton of the kite. Make a variety of kite skeletons according to your hobbies, such as dragonflies and butterflies.