HOW TO USE WIFI ON THE BUS 5

It can be used by connecting to wifi.

You don't have to be afraid of "lonely journey" to commute by bus, as long as you use your mobile phone and tablet.

Connect to the free Wi-Fi (i.e. wireless LAN) in the bus.

Beijing has completed the upgrade of the bus wifi network card, and has opened the service, passengers only need to connect to the "16wifi" in the bus, you can enjoy the network.

All the way to the hotspot on the bus Wi-Fi.

Transformation, upgrade the network card to 4G, and open the wifi service, although still in the process of system stability test and debugging, but the vast majority of buses, passengers can enjoy wifi.

Mobile phone search bus wifi wireless network link, and then open the mobile phone browser, open a web page, there will be a page of bus wifi, you can browse local information, want to surf the Internet, some places need ** bus APP software, in order to imagine the Internet.

When you open your mobile browser, you will see a page that requires registration or limited time use.

Like the staff ask for the password or mobile phone **wifi sharing wizard on it, wifi sharing wizard is a mobile phone must-have free wifi Internet software, automatically connect to free wifi hotspots around you, the software is completely free, no charge.

Look at whether the traffic on the bus is used up, and if it runs out, it will not be able to get in.

Many buses are equipped with wireless communication with dispatch offices, as well as satellite positioning so that dispatchers can grasp the location of the vehicles. The bus stop shows the time when the bus arrives at the station. Interruption of vehicle signals means that all or part of these signals are unusable.

Interrupt numbers are assigned by the system to each interrupt source for identification and processing. The number of interrupts plays a very important role in interrupt processing. In the interrupt system in vector interrupt mode, the CPU can find the address of the interrupt service program and realize the transmission of the program.

Find the size of the interrupt service program entry trace address of the interrupt, you can interrupt the number of times, get a pointer, 4 points to the interrupt vector at the scale of the interrupt position, take out this address, load the ** segment register cs and the instruction pointer register ip, that is, interrupt the service routine.

Hello. You search for wifi network signals on the bus, just like Wuhan bus as an example, search for the network signal as shown in the figure, click to connect, enter the password 12345678, and you're good to go. Now do bus wifi on Xiamen Caimao communication is not bad.

As long as the terminal equipment such as personal computers and handheld devices (such as pads and mobile phones) support the Wi-Fi function, turn on the Wi-Fi connection, search for the corresponding on-board Wi-Fi signal on the bus and connect to the Wi-Fi network to start the Wi-Fi experience.

Bus Wi-Fi is a wireless Wi-Fi hotspot coverage and management system, through a Wi-Fi router, to bring users a series of services such as safe Internet access, user resource collection, precise advertising push, customer marketing, and diversified applications. It is a WIFI Internet access device for public transportation such as buses, and the WIFI terminal converts 3G 4G signals into WIFI signals for passengers to access the Internet to obtain information, entertainment or mobile office business mode.

I want to increase by about 10 percent in the same period last year. Your words, I want to increase the same period last year for a hundred years, and indeed a lot of surprises are not in your life.

When we talk about WiFi, we should refer to WiFi hotspots, and another name for WiFi hotspots is AP (Access Point). There are various types of APs, mainly divided into home APs and commercial APs. There are differences between home APs and commercial APs in terms of the number of concurrent users and bandwidth management.

Home APs are most commonly used as wireless routers at home, while commercial APs are generally deployed in densely populated areas such as conference centers and airports.

There is free WiFi on buses and buses, in fact, there is another name MIFI, which can be understood as mobile WiFi, and the corresponding home AP and commercial AP are not mobile. In layman's terms, MIFI allows you to have a good Internet experience on buses traveling at 30km/h, which is not possible with home and commercial APs.

The reason for this difference is that home and commercial APs are connected to the core network (understood as a data center where all the content you access online) via fixed broadband, and MIFI is wirelessly connected to the core network via 4G. MIFI is actually a signal bridge that converts 4G signals into WiFi signals for people on buses. Home AP and commercial AP convert fixed broadband into WiFi signal, and fixed broadband cannot run all over the street.

After entering the bus, you can see a white square box (TDFI) installed on the back baffle of the driver, or above the front door of the car, indicating that the bus has turned on the bus WiFi.

Step 1: Turn on the Wi-Fi connection in your phone's settings.

Step 2: Connect the CMCC.

Step 4: Click Continue to enter the home page of the e-channel WiFi platform.

Step 5: Free access to e-route wifi can only browse the webpage provided by e-route for free.

If you need to browse Internet content, you need to go through the local network platform e-channel wifi homepage "CMCC login entrance" for China Mobile authentication before you can access the Internet, the tariff is 5 minutes.

System Principle Description:

1.Through the 3G 4G WiFi advertising router, the operator network is converted into a WiFi network covering the entire carriage, 2After passengers connect to the wifi, they will see the advertising information first; Then jump to login, registration page, for the first time to use the bus wifi passengers need to first register by the passenger's own mobile phone number (SMS verification code) before logging in, you can surf the Internet after successful login;

3.For registered passengers, you need to log in with your mobile phone number and password to surf the Internet.

It may be that the bus has a wireless AP installed, and then it is done through other 3G devices on the bus**.

It should be connected to some public APN, or the traffic is restricted.

Otherwise, the traffic fee is definitely higher than the car price.

It should be a hot spot on a nearby building.

The implementation of the bus on-board wifi is to place a wireless gateway that supports 3G 4G to wifi on the bus (the model has caimore-cm8151g cm8251g cm8351g cm8451g cm8551g), and then in combination with the network management server, if you want to realize advertising push and mobile phone access authentication, as long as the server increases this part of the application software.

Carry out network coverage construction next to the subway and bus lines to make the signal meet the requirements of the Internet. How to build a network is a very complex problem.

It should be a big mobile network.

It's like a hotspot on your phone.

Communication cables, and other merchants are a truth.

1. With the construction of mobile Internet and the popularization of mobile Internet devices such as mobile phones and tablets, mobile Internet has shown huge business opportunities. The value of the export of the mobile Internet is also getting higher and higher, wifi equipment, as one of the main intervention points of the mobile Internet, will play an increasingly important role in the entrance of the mobile Internet, with the in-depth development of wifi equipment, value-added points continue to excavate, wifi equipment, especially operation-level wifi equipment, will inevitably face an extremely broad market, wifi operation can even create a number of new operator systems relying on services and operations.

Step-by-step instruction on how to use the free wifi signal on the bus.

Wi-Fi Internet access is generally achieved by entering the account to pay, and the operation model of "free Internet access through ** advertising" will change this single situation and transform into a "backward payment" operation model, that is, the forward user is "zero payment" when using Wi-Fi access to the Internet. "Backward pay" means that backward advertisers are paid, and users who use wireless networks are not charged for Internet services. Typical use cases for this pattern are:

Before logging in to the Wi-Fi network, users need to ** the advertisement on the login page, or click the market research option button, etc., and users can access the Internet for free as long as they select and submit. The time can be set by the operator, such as 30 minutes, after the user goes online for 30 minutes, the page will automatically return to a new set of advertising pages, as long as the user goes to see the advertisement or continues to click, he can surf the Internet for free for another 30 minutes. (The time can be set in your own background).