What should I do if I am annoyed that the network is disconnected regularly every day, and how to co

If there is a network outage at a fixed time every day, it is due to two reasons:

Therefore, the DDS attack software is used on the computer to set up an attack on your router at a fixed time, which will cause the router data traffic to block packets, block the network, or even interrupt, so that the network is disconnected. In this case, you can only press the restart twist of the router to restore the router to factory value, then turn off the power, and replug the network cable, then plug it back in, and turn on the anti-DDS attack on the router to lock the IP and MAC address of the network card.

This kind of attack can be effectively prevented.

The second reason: the system has also been attacked, the Trojan has entered your computer, the Trojan has also set a time period, when the set time, the virus is automatically activated, and then specifically attacks the network port, which causes the network to be unable to enter the computer's network card, and the network is naturally disconnected. Generally, in this case, you can only restart the device, press F8, and enter the safe mode.

In safe mode, use QQ Butler.

Anti-virus is comprehensive, and some also use anti-virus software.

For example, Jinshan Poison Bully.

Is it the school's network? Or the computer at home is set up with parent mode,Parents mode is easy to do,Log in to the router,Modify the permission settings on it,If it's a network in the school,It is recommended that you have a good relationship with the aunt in charge of the network in the school,Tell him not to disconnect the network,Realize it can't be done,Just secretly set up a card routing yourself,The same use,Hehe!

Tips: 1. First of all, your router, network, and network cable are all normal, otherwise you can't access the Internet before one o'clock in the afternoon, and if there is a problem with the above equipment, the downstairs connection is still impossible to access the Internet.

2. Secondly, your router should not support wireless network, otherwise you will not run downstairs to connect to the Internet. Therefore, it is excluded from being robbed by others to enter wifi resources.

3. There are several possibilities: It depends on whether your parents' computer is turned on at one o'clock in the afternoon, and there are abnormal programs running after turning on, or occupying your IP (you are automatically obtaining the IP). If it is not for the parents to turn on the phone, someone may have planted a Trojan horse, which will automatically turn on at a fixed time and force the network to be scanned.

Or maybe the router has settings, such as DHCP rental time is too short, or your parent machine has management software.

4. According to the above possibilities, you can set static IP observation. You can use "ipconfig all" in the cmd pop-up window to view the gateway and give the desktop NIC a fixed IP: if the gateway, the ARP firewall should be enabled.

5. If there is still a problem with the static IP setting, then only connect your own computer on the router to observe, if it can be used normally for 2 days, then reinstall your parents' computer (I don't know how your parents use the computer, assuming that it is not as good as you, so the computer protection is not strict and may be poisoned).

The operation steps of the mobile phone to control the broadband timed network disconnection are as follows:

Tools: iphone13, router.

1. On the Hejiaqin application page, select "Connection" and "Smart Device" in order.

2. Enter the selected gateway management page, and click the "WiFi Timing" setting item of the land object.

3. Enter the Wi-Fi timer setting page and click "+" to operate.

4. Enter the time setting page, set the "Start Time", "End Time" and other information, and click "Save".

5. If the wifi timing time is set successfully, the gateway will automatically disconnect the liquid network within the set time range.

1. Let's open the mobile phone guard first, and then we click the "Data Bill" button on the panel.

2. Then you will enter the traffic bill control panel.

On this panel there will be a "Traffic Firewall" option, click on it.

3. Then we will enter the traffic firewall control panel, at this time, we can see which software uses the most traffic in the monthly ranking and daily ranking. We click on the "Anti-Sneak Tools" button above the panel.

4. We will see that there is a "Nighttime Disconnection" option, we click the button behind the option.

5. After clicking the button, a dialog box will pop up, which will allow us to set the time period for disconnection.

7.We can set the time period of network disconnection according to our actual situation, and click the "OK" button on the dialog box after the setting is completed.

Extended Materials. There are generally three situations when the phone is disconnected:

1.Strong interference from radio waves can cause dropouts. Since mobile communication is propagated by air waves, when some air waves interfere with the radio waves being used to a certain extent, the use of signal noise ratio drops below the standard value, and the mobile phone will automatically turn off, and the connection will appear.

2.Transmission is blocked, reflections from buildings, and interference with radio waves at the receiving point can also cause dropouts.

3.The cross-area handover fails to drop the line, and the voice channel of the user's call needs to be switched from the original cell to the new service cell, but the user of the new service cell is also busy, and if there is no effective voice channel when the switch is not available, the cross-zone handover will fail, causing the mobile phone to drop the line. If the call is suddenly dropped, you can move it to change the position and try to avoid blind spots. Use.

Timing disconnection is not mobile phone control, since it is a timing, of course, it is a set timing, the mobile phone enters the router control to find the timing setting, set the timing time, as long as it reaches this time, it will automatically connect or disconnect from the network. There are also some routers that have a separate app that can be set up.

If it's controlled by a mobile phone, isn't it the same as directly unplugging the network cable, and it's not called timing.

How to get a wide belt to disconnect the network regularly.

Summary. Dear, your questionHow to control the broadband timing network disconnection on the mobile phone The method of controlling the broadband timing disconnection is as follows: 1. Use the app corresponding to the router at your home with your mobile phone and install it, such as taking the TP-Link router as an example.

2. Open the TP-Link software and connect to your home WiFi, the software will automatically search for the list of local devices, click in, enter the login password of the router administrator, as long as the password has not been set, the general default is to choose to view the currently connected device after logging in, if you want to prohibit which device to use the network, click on the device in the pop-up window "Prohibit the device from going online", so that the device can not connect to the network. 4. The software can also realize remote control of the router on the mobile phone, such as restarting or shutting down the router, changing the administrator password and wireless Internet settings, etc., and then follow the prompts to operate.

Dear, your questionHow to control the broadband timing network disconnection on the mobile phone The method of controlling the broadband timing disconnection is as follows: 1. Use the app corresponding to the router at your home with your mobile phone and install it, such as taking the TP-Link router as an example. 2. Open the tp-link software and connect to your home wifi, the software will automatically search the list of local devices, click in, enter the login password of the router administrator, as long as the password has not been set, the general silent pants think that after logging in, choose to view the currently connected device, if you want to prohibit which device to use the network, click on the device in the pop-up window "prohibit the device from going online", so that the Lu Chunnai device can not connect to the network.

4. The software can also realize remote control of the router on the mobile phone, such as restarting or shutting down the router, changing the administrator password and wireless Internet settings, etc., and then follow the prompts to operate in early spring.

Dear, the above is how to remotely control the home network with a mobile phone. It is also possible to control the time when children are watching TV or playing with their mobile phones. As long as there is no internet connection on the TV or mobile phone, the child will not be able to use the sizzu.