Urgent! My desktop computer, when I turn it on, there are always 4 alarms on the flute, and I don t

If you have a problem with your memory, it is recommended to remove it and erase it with an eraser.

It seems to be a memory problem.,Turn it off and try to reseat it.,Okay, please reply! Good luck!

It's a self-test memory error, and the first two brothers' methods will be replaced directly if they don't work.

The computer does not boot up, and there is a long and three short horn sounds, which is usually caused by a hardware failure or hardware connection problem. Specifically, there are several possible scenarios:

1.Graphics card failure. If there is a problem with the graphics card or its connection, the computer will not boot up and will make a long and three short honking sounds.

2.Memory failure. If the memory or memory slot is damaged, the computer will also make a long and three short honking sounds, and it will not be able to boot properly.

3.Motherboard issues. If the motherboard is damaged or there is a problem with the connection, it can also cause the computer to fail to boot up and make a horn sound.

In response to this situation, we can:Take the following measures:

1.Check the connection status of the graphics card and memory and whether the slot is loose, and if it is, it should be replugged in.

2.If the above measures do not solve the problem, it is recommended to try to change the graphics card or memory module of a different brand or model to determine whether it is caused by hardware failure.

3.If the above measures do not solve the problem, it may be a motherboard failure. At this time, it is recommended to contact the relevant maintenance personnel for diagnosis and repair.

In general, when a computer doesn't boot up and makes a long or short honking sound, it's usually caused by a hardware failure or a connection problem. Check and replug the hardware connections, replace the hardware of a different brand and model of hardware, and test it to determine the cause of the failure. If the above measures do not solve the problem, it is recommended to contact a professional maintenance personnel for diagnosis and repair to ensure the normal operation of the computer equipment.

At the same time, when using the computer in daily life, you should also pay attention to maintenance and maintenance to avoid hardware damage and failure.

The laptop won't turn on, and it rings. Most of them are memory module issues. This problem can be solved after disassembly and cleaning.

If the sound is one short or three long, there is a problem with the memory module, and if it doesn't work to reinsert the memory module, the memory is broken, and if the sound keeps ringing, it is a problem with the motherboard.

Maybe the memory is loose, dial the memory down and plug it in again.

If the self-test fails, check the connection between the memory and the hard disk.

A long and three short honking is usually an indication of a problem with your computer's memory. You can try the following steps to fix this Qingsen issue:

Turn off your computer, disconnect the power cord, and then reconnect the power cord to start up your computer.

Check that the memory module is properly plugged into the motherboard, and if not, plug it back in.

If you have more than one memory module, try unplugging each memory module separately and testing each slot to determine if there are one or more poorly skinned memory modules.

If you have spare memory modules, consider replacing them.

If none of the above steps resolve the issue, you may need to contact your computer manufacturer or a professional technician for further repairs.

1 Short: The system starts normally. There is nothing wrong with your machine.

2 Short: General error, please go to CMOS Setup and reset the incorrect options.

1 long and 1 short: There is an error with the RAM or motherboard. Try to change the memory, if it still doesn't work, you have to change the motherboard.

1 long and 2 short: The display or graphics card is wrong.

1 long and 3 short: The keyboard controller is wrong. Check the motherboard.

1 Long 9 Short: Motherboard Flash RAM or EPROM error, BIOS corruption. Try a different block of flash ram.

Constant ringing (long sound): The memory module is not plugged in tightly or is damaged. If it still doesn't work, you can only replace a memory module.

Repeated, short ring: There is a problem with the power supply.

It may be that the memory module is in poor contact, otherwise look at the BIOS settings.

It's possible that something on the motherboard isn't plugged in.

A kind of motherboard BIOS chip (AMI

BIOS and AWARD

BIOS) as an example, to introduce the specific meaning of the common POST alarm sound: award

BIOS1 short: The system boots normally. Shows that there is nothing wrong with the machine.

2 Short: General error, please go to CMOS installation and re-set the incorrect options.

1 long and 1 short: There is an error in the memory or motherboard. Try to change the memory, if it still doesn't work, you have to change the motherboard.

1 long and 2 short: The display or graphics card is wrong.

1 long and 3 short: The keyboard controller is wrong. Check the motherboard.

1 long and 9 short: The motherboard BIOS chip is wrong, and the BIOS is damaged. Try a different BIOS chip.

Long Ring: The memory module is not plugged in tightly or is damaged. Reinsert the memory module, or replace the memory.

amibios

1 Short: The memory refresh failed. Replace the memory module.

2 Short: The memory ECC verification error is incorrect. In CMOS settings, set the memory options for ECC check above to disabled.

You can solve it if you use it, but the most fundamental solution is to replace a piece of memory.

3 Short: The basic memory check of the system fails. Change memory.

4 Short: The system clock is wrong.

5 Short: There is an error in the CPU.

6 Short: Keyboard controller error.

7 short: The real mode of the system is wrong and cannot be switched to protection mode.

8 Short: Video memory error. If there is a problem with the video memory, try changing the graphics card.

9 Short: BIOS chip detection error.

1 long and 3 short: memory error. If the memory is damaged, it can be replaced.

1 long and 8 short: Displays a detection error. The monitor cable is not plugged in properly or the graphics card is not plugged in properly.

Hear for yourself how it sounds!

Hello! award

BIOS Self-Test Ring Meaning:

1 Short: The system starts normally. Congratulations, there is nothing wrong with your machine.

2 Short: General error, please enter CMOS

setup, resetting the incorrect option.

1 long and 1 short: There is an error with the RAM or motherboard. Try to change the memory, if it still doesn't work, you have to change the motherboard.

1 long and 2 short: The display or graphics card is wrong.

1 long and 3 short: The keyboard controller is wrong. Check the motherboard.

1 long and 9 short: motherboard flash

RAM or EPROM error, BIOS corruption. Try a different block of flash ram.

Constant ringing (long sound): The memory module is not plugged in tightly or is damaged. If it still doesn't work, you can only replace a memory module.

Ringing: The power supply and monitor are not properly connected to the graphics card. Check all the plugs.

Repeated, short ring: There is a problem with the power supply.

No sound and no display: There is a problem with the power supply.

Let's take a look at which of the following you belong to.

When the computer is turned on, you should first listen to how these error sounds to determine what is the problem with the macro. Cause the computer self-test to fail.

1. The rhythmic tick long sound, which means that there is a problem with the memory, first power off and then reseat the memory. If there are multiple memory records, you can remove one memory and do a separate memory boot test, but not the other one. If it is a single internal attack, it can be replaced with normal memory if possible.

2. One long and a few short, shoot friends and waiters Di Di Di, which means that there is a problem with the graphics card. It is also to reseat the graphics card after the power is off. If it doesn't work, if possible, replace it with another normal graphics card to detect.