What causes the mechanical ascension to be the weakest, and is there a difference between the mechan

If you can't reach the full level.,I'd recommend flying around 141.。。 If you ascend at this stage, your attributes are not much worse.

After ascension, all professions cost money, you spend enough money, and any profession is nonsense.

The Ghost King mainstream is the Devil King.

If you have money to enter the fairy ghost king, don't talk about the fairy ghost king's garbage, the RMB devil king himself said, the fairy ghost king is strong, but there are few people who play the fairy ghost king, and the money spent is not the average person's suffering.

Acacia, it seems that now in addition to the magic acacia, the immortals and Buddhas are very strong (the Buddha's equipment requirements are very high, if you can't meet the requirements, enter the immortals).

Tianyin, many people enter the Buddha, because it is cool to hang up, but if you go to the new area, you can see a lot of non-working Tianyin flying immortals, because Xian Tianyin not only has strong immunity to lethargy, but also has killing skills.

Ghost Dao, it seems that that camp is good, but the ghost road is a super expensive profession (Demon, Buddha is slightly better, and the immortal doesn't spend money, and it feels very rubbish).

Qingyun, if your investment can reach 7600+ in your small attack, Demon Qingyun, brush the gold and be crooked.

Now it's a little bit of pk on Xianqingyun.,Easy 2,The added skill dodge is equivalent to invincibility once (it takes a lot of money to fill the point)。。 The Buddha's group of monsters is also good, and there are many places where the Buddha maps the group of monsters.

Most of the flying demons in the Burning Mountains are demons.

Jiuli didn't know.

Is it the stars, if it is the stars, ask me to answer carefully.

After the immortal ascends, according to the different camps you choose, the colors are naturally different, which is also to distinguish between those who fly and those who do not, the upstairs is good, but the immortals should be regarded as green to be exact.

The normal algorithm is that the three strengths are the same, and they all have corresponding ways to play, but the soul of power obtained after killing the mechanical worm is synthesized into a giant beast shark, which has a very strong DPS, so most people will choose mechanical worms, and the way to play mechanical worms is to dodge head attacks, which is a very simple way to play, so this may be the easiest, as long as the DPS is high enough to deal with Mechanical Skeleton King, it can be crushed, and the general giant shark and magic crystal bullet are steadily solved, and the way to play the twin magic eyes is to run, non-stop running, using the Giant Shark to consume remotely.

The iron is long and straight, and it can't come up.

The second technology, you have to look at the face, I hung up for 15 years before the colonial technology, and then the source of fiber to build a colonial ship, this ship consumes electricity to top all the consumption of your country. And then when the colonization of the cracks seems to be a specific plot above.,Another post has a senior saying that you have to bring someone on the ship.,It should be.。。 The super high power consumption on the colony is gone, and it is integrated with the stars.

Classmate, I also studied machinery, and I can tell you very responsibly that China's manufacturing industry is basically ctrl c

ctrl v take other people's outdated things Cutting-edge technology is secretive We can't get China and several machinery manufacturing powers, such as Germany, the United States, Japan, etc., there is no comparison at all If you just want to find a job, then congratulations, mechanical professional jobs are easy to find, there is food everywhere If you want to engage in research, then it is best to study abroad after graduating from undergraduate It is difficult to learn top things in domestic schools It is difficult to learn top things in domestic schools So to speak, you have a few years of master's and doctoral studies, and you go out to work for some good companies or go to research institutes to make a living, and maybe you will stay in school to teach If you want to revitalize the domestic manufacturing industry, it is basically impossible.

Hey, if you are willing to spend your whole life like a drop of water into the sea, you will study machinery deeply, continuously and for a long time!

China is in the initial stage of machinery manufacturing, the above is true, but it is also a bit extreme! China wants to develop slowly on its own from 0, then it's okay, but it will have to wait until the accumulation of 100 years and 100 years, then it will die early! The most direct and fast way is to introduce technology, digest internally, imitate, and catch up on the basis of others.

However, the current situation is not very good, the Chinese people are pursuing interests, impetuous, the great leap forward in technology is still there, this machinery manufacturing is based on long-term accumulation, not in a hurry, do not first digest foreign technology, it is useless to be blindly arrogant.

No matter which direction you choose, you can make a difference, hehe! At present, I personally understand that the manufacturing level of hydraulics is too poor, and the manufacturing of transmission parts is not good, just for reference!

I graduated with a bachelor's degree in mechanical design, and I tell you: unless you are very interested in mechanics, or you are very talented in mechanics. Otherwise, hurry up and find a non-mechanical direction to study and study!!

China's manufacturing precision is low and assembly technology is limited, which is the fundamental constraint on the quality of Chinese products.

I think that if you want to make a great contribution to China's manufacturing industry, you must first learn classroom knowledge, and then go to the factory to practice, and at the same time pay attention to diligent thinking, have a certain theoretical knowledge and practical experience, and then go abroad to get foreign advanced technology.

For freshman year, after you adapt to the school environment, joining a mechanical innovation team will improve a lot with the help of seniors and will be very beneficial to your future development.

Hebei Ruifuxiang believes that it is mechanical design, mechanical engineering, and mechanical and electrical engineering.

Equipment manufacturing industry to consider. But don't do mechanical design, it's not promising (unless you're top-notch).

Go to fight the other world, make an E2 arson cover, it is not possible to use CC, whether it is ** or armor.

First of all, go to do a task, it's the otherworldly Huai to change the potato, get a ring, and if you don't have it, you can buy some magic resistance equipment.

All that's left is to learn how to play.

The other world is not a difficult picture, but it is necessary to be skillful, without skills, it can't be said that you can't beat it, but you will fight it very painfully.

The reasons why a mechanical watch is slow are:

1. Insufficient power, mechanical watches are divided into manual mechanical watches and automatic mechanical watches, insufficient power is an important reason for the watch to slow down or stop the watch, manual mechanical watches can be wound directly when slow, and the reason why automatic mechanical watches are slow is mostly because of insufficient wearing time or the arm does not maintain a normal amount of exercise, and it can be directly manually wound to supplement the power.

2. There is no maintenance, mechanical watches are generally maintained once every 2 to 3 years, the watch is used for a long time, the lubricating oil in the movement will dry up, and the friction of each gear will produce iron filings for a long time, increasing the friction between the gears, this kind of problem only needs to clean the movement and re-refuel.

3. Impact, the structure of the mechanical watch is complex, it is composed of hundreds of precision parts, it is very fragile, the watch is hit by a strong impact, and the parts in the movement may loosen, causing the watch to slow down or stop the watch. According to the reason why the watch is slow, you can take corresponding measures, pay attention to the winding of the manual machinery, maintain the normal amount of exercise of the automatic mechanical arm, maintain it on time, pay attention to the watch waterproof, shockproof and anti-magnetic, and send it for repair in time if there is a problem.

Mechanical watch time is old and slow reason:

Why and how mechanical watches are magnetized.

In today's social life, ubiquitous electronic products generate strong or weak magnetic fields around us. Magnetized watches may not see any problems in the short term, but as time goes by, it will become slower and slower.

Various types of permanent magnets are also widely used in electrical appliances, typically speakers and motors, and both magnets and DC magnetic fields can magnetize "hard magnetic" materials such as steel. There are many steel materials in mechanical watches, such as large and small steel wheels, escape wheels, shaft tenons of gears, bearings, screws and hairsprings, and when the hairspring is magnetized, the watch will stop immediately. Magnetized watches may not see any problems in the short term, but as time goes by, it will become slower and slower.

How do I demagnetize my watch? The handling of the magnetization of the watch is very simple. Take it to the customer service center or the watch repairer, do not open the cover, directly use the demagnetizer (or called the degaussing machine, the must of the watch repairer, the market price is only a few hundred yuan) for demagnetization, and the watch can return to normal in 2 seconds.

Nowadays, there are many anti-magnetic watches, but the so-called anti-magnetic watches are not all parts of the watch are anti-magnetic, only the main parts, such as the balance, hairspring, spring and other parts made of anti-magnetic materials. Although it is an anti-magnetic watch, it can only serve a preventive role, so you should avoid placing the watch next to electrical appliances or magnetic objects that generate magnetic fields.

It is best to send the watch repair department to degauss, because there is a special equipment for demagnetization, if it is not convenient to repair away from the watch shop, you can find a piece of iron in the shape of a circle in the middle, without magnetization, stand it on the table, and slowly pass the watch through the iron circle. The magnetization of the watch may go faster, slower, or even stop.

The second is that the watch is disturbed by the magnetic field, and the general quartz watch is disturbed, and there will be a stealing phenomenon;

Of course, the stop-and-go watch is to reflect on the battery first, and if the battery has electricity, the quality of the watch is not good.

What's wrong with mechanical watches always going fast What can be done is the most effective and simple 10 seconds method to make the watch super accurate! Save it away! )

[Watch maintenance and repair can refer to the service center to go to 702, Xidan Joy City Office Building, Xicheng District, Beijing] to provide Swiss watch strap customization, cleaning and maintenance, identification, refurbishment, fault repair, watch appearance and replacement of damaged parts, strap replacement services. Our technicians have undergone strict professional skills training and provide two years of after-sales guarantee services. The service center is guided by the watch manufacturer on the spot**, **transparent, no hidden consumption, no additional charges.

1. Magnetization of the watch: The watch is in too much contact with items with magnetic fields, which leads to the phenomenon of magnetization of the watch, causing the watch to be inaccurate. After being magnetized, the watch may stop, slow, or fast.

After the watch is magnetized, its magnetism will not recede on its own, and it needs to be demagnetized to restore it to normal. Therefore, you can only go to a professional watch repair center for demagnetization so that it can return to normal.

2. Lack of maintenance: mechanical watches are maintained every 2-3 years, and quartz watches are maintained every 4-5 years. Watch maintenance requires the movement to be completely disassembled, cleaned, oiled, reassembled, adjusted, and functionally checked; Repair or replace any worn or malfunctioning movement components.

If the watch lacks maintenance, it will cause the parts to wear out, the sludge will dry up, affect the normal running time of the watch, and make the watch appear fast and slow. Regular maintenance of the whole machine can effectively prevent the occurrence of various failures of the watch.

3. Mechanical failure: Mechanical failures such as watch hairspring failures, escapement system failures, and parts and components may cause the watch to appear fast and slow, so when the watch is abnormal, you can first pull out the crown and take it to a professional maintenance organization for the maintenance technician to check the reason.

The fact that fully automatic watches are going faster and faster is related to the following aspects:

1. The speed of a fully automatic mechanical watch is mainly determined by the pendulum frequency, usually the larger the swing, the smaller the pendulum frequency, and the smaller the pendulum, the greater the pendulum frequency. Generally, watches rely on the retraction and release of the hairspring to control the swing, which is the basic principle of adjusting the speed and slowness. If the hairspring is longer, the swing will increase, the frequency will be smaller, and the watch will be slower; Conversely, the more the pendulum frequency increases, the faster the watch will be.

2. The structure of the problem. Due to the gravitational pull of the earth, the offset between the horizontal position and the vertical position will produce a displacement, and the mainspring will be unbalanced from the top to the loose, and the torque will be unbalanced, and it will be affected by the external temperature, magnetic field, vibration, etc.

3. Magnetic field utility. After the hairspring is magnetized, the loops between the loops are only visible when worn, and there are sticky or brief loops, especially on the façade, the hairspring will hang down due to its own gravity, and the shaking of the arm will intensify its radial movement, resulting in a change in time.

4. The balance of the balance wheel and the balance spring, especially the balance wheel. The balance wheel is very poorly balanced, which will cause the balance wheel to change the precision of the surface at a certain swing.

The reason why a mechanical watch is slow.

The main reasons for the slow running time of the mechanical watch are: insufficient activity and insufficient kinetic energy; The watch is magnetized; The movement oil sludge is dry, etc.

If you want to repair and maintain the watch, replace the watch accessories, or have any problems with the watch, you can click to consult.

Generally, the watch cannot adjust the watch date and time from 9 o'clock in the evening to 3 o'clock in the morning, which can easily cause problems with the internal calendar transmission wheel train of the watch, so it is forbidden for the watch to adjust the date during this time.

Automatic mechanical watches need to be worn normally for about 8 hours a day, and the normal and appropriate amount of exercise kinetic energy is needed to support the time, and the wearing of 8 hours a day can support 36 hours of time.

Generally, the watch is close to the magnetic field, such as placing it next to electrical appliances (such as stereos, refrigerators, computers, etc.) that generate magnetic fields, and magnetic objects (such as magnets, mobile phones) will cause magnetism, which will affect the watch to run fast or inaccurately or temporarily stop. If the oil in the watch movement is dry, it will increase the friction resistance between the parts in the watch, causing the watch parts to be damaged and unable to operate normally.