How to see if the mobile phone is flooded How to identify the water ingress on the mobile phone?

Guess you like: What to do if your phone gets into the water Netizens share the remedies for the later stage of the water ingress on the mobile phone How to identify the water on the phone? Now many smart phones, especially rugged smartphones, if you enter a small amount of water, there will generally be no problem, some mobile phones are dried after entering the water, and no problems are found in the later use, if there is less water intake, and there are no other obvious problems, you can also consider starting.

The following is an introduction to how to distinguish whether there is water and moisture from the simple mobile phone fault phenomenon and appearance characteristics. The water inlet machine may have the following abnormal fault phenomena: 1. Automatic power on and off for no reason 2. LCD display is occasional, display contrast display is abnormal, and black screen.

3. The key is out of order, and the key is wrong. 4. The battery symbol keeps showing that it is charging. 5. The earpiece has a murmur and shuts down.

6. The background light, button light and signal light will always be on. Therefore, if you suspect that a second-hand mobile phone may have entered the water, you may wish to check the above 6 aspects, in addition, if there is very little water, and there is no failure, it generally means that the water has not entered the inside of the mobile phone, so there is no big problem, and finally you can shake the mobile phone more vigorously to see if the mobile phone will be abnormal and so on. Recommended Reading:

What to do if your phone falls into the water How to deal with water ingress on your mobile phone.

Irradiated with strong light, there is a liquid inlet test strip inside the cart.

<> smell the phone for peculiar smell, if there is a peculiar smell, and there are traces of stains, it means that water has entered;

If the mobile phone is not under warranty, you can open it to see if there are traces of water ingress on the motherboard, whether there are white corrosion marks, and if there are corrosion marks, it means that water has entered;

Connect the power supply to see if the mobile phone is leaking, see if the water inlet mark on the back of the mobile phone changes color, if the mobile phone is flooded, the water inlet will turn red;

Dismantling method, each mobile phone will have a small piece of paper near the main version or the main version, once the water enters, the white piece of paper will turn red, and this piece of paper is difficult to fall off and destroy, after dismantling, you can see, this is a more basic test method.

1. First of all, the mobile phone is placed in a ventilated place for ventilation for about 24 hours, so that the moisture in our mobile phone can be volatilized, so the mobile phone cannot be opened immediately after falling into the water.

2. After the mobile phone is placed in water for a day, it is best to blow it with a hair dryer, after determining the volatilization of water, open the mobile phone to see if it can be turned on.

3. If you can turn it on, you can make a call** can be connected and used normally, there will be no problem, if you can't connect **, it is likely that there is a problem with the mobile phone chip and hardware.

1. You can try plugging in the charging cable, Apple will show that it cannot be charged, and you can wait for the water to dry.

How to confirm whether the mobile phone is flooded, the operation steps are as follows; 1. The motherboard is most likely to be damaged by water ingress, but it has not been professionally tested, so it is not good to draw conclusions, and the worst case is that it cannot be turned on; Other situations include white screen, leakage, **can't dial or can't connect**, etc., which are all motherboard problems, and after water ingress, the internal environment will change, and the possibility of oxidation and corrosion will increase, so it is recommended to stop using it. 2. The mobile phone should be turned off immediately when it enters the water to avoid further damage, send it to a nearby repair shop as soon as possible, disassemble and take the battery down, do not blow it with an electric hair dryer, it is easy to cause corrosion, you can use a paper towel to absorb the water, and then wipe it with alcohol, which is volatile and can be dissolved in water. 3. If the mobile phone falls into the sewage, first disassemble the phone to see the corrosion degree of the mobile phone circuit board.

There are many acid and alkali compounds in sewage, which will cause different degrees of corrosion to mobile phones, so after the mobile phone falls into the sewage, it should be quickly cleaned and treated; First, the visible corrosive material is cleaned up, and the impurities attached to the component pins are brushed off with a brush, and then the circuit board is cleaned with an alcohol cotton ball. I hope my answer is helpful to you, and finally I wish you good health and a happy mood again!

Hello, is there anything wrong with the water on the mobile phone, first of all, the most intuitive way is to look at your mobile phone screen, if the general mobile phone is confirmed to be watered, then the inner screen of the mobile phone screen may have a watermark, you see if your screen has a watermark.

In the screen-off state or in the whiteboard state, you see if your phone has a watermark, if your phone does not have a watermark, then in general, your phone is not flooded.

Because for mobile phones, the inner screen of the mobile phone is the easiest place to get water, if the inner screen is not water, the motherboard inside must be safe, and secondly, you can ****, you see if you **** this sound, similar to the sound of the speaker, whether there is a harsh sound, if there is no harsh sound, it proves that there is no abnormality in its speaker itself.

That is to say, there is a watermark on your inner screen, right, do you see if this watermark is big?

That is to say, whether the watermark covered is sensitive, whether the screen part is sensitive, whether it can be used normally, how to confirm whether the phone is flooded, hello dear, the operation steps are as follows; 1. The motherboard is most likely to be damaged by water ingress, but it has not been professionally tested, so it is not good to draw conclusions, and the worst case is that it cannot be turned on; Other situations include white screen, leakage, **can't dial or can't connect**, etc., which are all motherboard problems, and after water ingress, the internal environment will change, and the possibility of oxidation and corrosion will increase, so it is recommended to stop using it.

Check whether the boot is abnormal, such as abnormal heating, whether the screen is blurred, etc.

It is best to leave it in a rice jar or a bag containing rice overnight, as attempts may cause devastating damage such as screen smudging and circuit board short circuits.

If the mobile phone is in water, it will damage the equipment of the mobile phone itself****, and even if it is repaired, it is not very smooth to use, and it is not as smooth as the original.

1. If the mobile phone cannot be turned on immediately when the water is in, the mobile phone should be placed in a ventilated place for ventilation first.

2. Volatilize the water in the mobile phone, and then turn it on.

3. After water ingress, it is likely to cause the mobile phone to be unable to talk, you can try to dial** to check whether there is a problem with the mobile phone. Carefully inspect the mobile phone screen, generally there may be water stains in the mobile phone screen after water ingress, if there are water stains, you need to repair it.