-
If your phone is not working properly, please check the following:
1.Check whether there is a network, if the local area has covered Unicom 3G signal, it is recommended that you can use it in a place with a strong signal;
2.Check whether there is still a credit in the account, if the balance is insufficient, you need to recharge before you can use it;
3.Check whether the USIM card is inserted, if it has been inserted but still cannot be used, it is recommended that you go to the business hall to check whether the USIM card is faulty, or replace the card for testing;
4.Check if there is a problem with the phone, it is recommended to test the phone.
5.Check whether the mobile phone parameters have been set, and the specific setting method is as follows:
1) The main parameters that need to be set for 2G mobile phone Internet access are: connection name: interactive vision (GPRS), data bearing mode:
GPRS, Access Point Name: UNIWAP, Username, Password: No Setup Required.
Off, Connection Type: Permanent, Optional Port: 80 or 9201.
2) The parameters of China Unicom 3G mobile phone are set to: APN access point: 3GWAP (regardless of case), user name and password are empty, gateway **address: , port number: 80, home page:
If the above situation has not been resolved, you can contact the local customer service to deal with it.
-
Hello dear! You can first see if the mobile phone signal shows 3G or H, if it is displayed, then you can consult other Unicom users around3G user usage, or change the mobile phone to try, if the surrounding users are the same as your use, you can be located3G signal is not very good, if other users are using it normally, it is normal to change the mobile phone test, then you need to test your mobile phone.
-
If your phone is not working properly, please check the following:
1.Check whether there is still a credit in the account, if the balance is insufficient, you need to recharge before you can use it;
2.Confirm whether the mobile phone parameters have been set, the 3G mobile phone parameters are set to: APN access point: 3GWap (case-insonial), username and password are empty, gateway **Address:, port number: 80, homepage:
Once you've set the parameters, you can tap the Internet button to explore the online world.
3.Check whether the USIM card is inserted, if it has been inserted but still cannot be used, it is recommended that you go to the business hall to check whether the USIM card is faulty, or replace the card for testing;
4.To check if there is a problem with your phone, it is recommended that you can test it with a different phone.
If the above situation is not resolved, you can contact your local customer service to deal with it.
-
The mobile phone network is not good because the signal will be affected by various factors such as terrain, landform, and tall buildings during the propagation process, and if you are in a relatively closed place, the signal will be affected. Here's how to deal with it:
1. Turn the phone on and off again and try again;
2. Swap the SIM card to a family member's or friend's phone and try again.
3. Check whether other Unicom users around you have signals;
4. If you can't solve the network signal problem, you can contact the local manual customer service for feedback.
If you have any questions, click here. Consultation.
-
If your mobile phone cannot access the Internet normally, please check the following conditions:
1. After upgrading to 4G 5G**, if you don't restart the phone, you will not be able to use the Internet function normally;
2. Confirm whether there is a network, it is recommended that you can use it in a place with a strong signal;
3. Check whether there is still a phone bill in the account, if the balance is insufficient, you need to recharge before you can use it;
4. After 3-5 minutes of power off, restart the phone and try again;
5. Check whether the USIM card is inserted, if it has been inserted but still cannot be used, it is recommended that you go to the business hall to check whether the USIM card is faulty, or replace the card for testing;
6. If the traffic used in the month reaches the maximum value, the network will be automatically closed, Xianyuan recommends that you pay attention to our SMS reminder or inquire **product description.
If you have any questions, click here.
Consultation. Brother is the state.
-
What does our 3G mobile phone signal display sometimes "3G", sometimes "G", sometimes "E", sometimes "H"? First of all, I will tell you that these displays are normal, there is no problem with the mobile phone, 3G means that the network is WCDMA or other 3G network status, G means that the network is 2G status, E means that the network is EDGE, it belongs, the network speed is faster than 2G, H means that the network is HSDPA, and it is also a transmission protocol of 3G, also known as, faster than 3G.
-
Try uninstalling the NIC driver and reinstalling it.
-
Which company's 3G card are you using?
-
1. The change of mobile phone to 3G signal may be caused by the following reasons:
1. There is no 4G network coverage in the current area, or the 4G network coverage is weak;
2. If you select the 3G network when you set up the network on your phone, it is recommended that you check whether you have accidentally selected the network to a 3G network in the settings of your mobile phone.
2. There may be the following reasons why the mobile phone cannot access the Internet:
1. The "Data" on the phone is not opened;
2. The traffic comma capping system refers to the automatic shutdown of the Internet function.
-
According to the situation you described, the possible reasons for not being able to access the Internet and how to deal with it:
1. Check whether the number still has a phone bill, if the balance is insufficient, you need to recharge before you can use it;
2. Confirm whether the parameters of the mobile phone pants have been set;
3. Check whether the USIM card is inserted next to the hall, if it has been inserted but still cannot be used, it is recommended that you go to the business hall to check whether the USIM card is faulty, or replace the card for testing;
4. Check whether there is a problem with the mobile phone, it is recommended that you can change the phone for testing.
If the above situation has not been resolved, it is recommended that you contact the local customer service for processing.
-
Tianyi 3G has a signal and can't connect to the Internet.,It's always not moving when verifying the username and password of the Heng Peng.,It's useless to try to reinstall the driver.。
Please consult customer service to see if there is a problem with the cost.
It's really good, a good article that lights up.
First of all. A 3G phone is just one more 3G module than a regular phone. Other features are exactly the same! >>>More
Who let you choose mobile,Unicom3G is the fastest and most stable in China,The lowest96Yuan**There are 240 minutes of talk time,Beyond the uniform Yuan minutes,Long-distance roaming regardless of local calls,Free answering,There is also 300M traffic (no roaming),Beyond the yuan KB,About Yuan M。 >>>More
1. Its cry can call a female fire dragon or a dog dragon king or a dinosaur or a water dragon. 2. When it hits the flint and flint charge, the inexperienced hunter must start moving constantly or raise his shield to resist his spark attacks, and never be greedy for knives. When enraged, the flint's charge time decreases, the number of attacks increases to three, and it can only move while it is charging, and must not fight with a shield. >>>More
All mobile cards do not distinguish between 2G and 3G, as long as your mobile phone supports TD-SCDMA, any mobile card can directly use the mobile 3G network, and there is no need to open any business in the business hall, and the mobile tariff is not differentiated between 3G and 2G, and all tariffs** can be used in both 2G and 3G networks. >>>More