Use 502 glue to repair the hairpin for the girl, what should I do if it sticks to my hand

1. You can use a wet hot towel to stick 502 there. After ten minutes, the cured 502 will become soft and can be removed. In addition, you can put a drop of 502 on the place where there is 502, and the cured 502 will also become soft, so it can be removed with a towel.

2. With insulating oil, pour the insulating oil in the transformer on the table, and the 502 glue will quickly become soft and can be rubbed off quickly.

Glue is an instant glue that can be used with a dissolved organic solvent, such as acetone. Acetone solution washable. However, acetone is toxic if inhaled, so pay attention to how to use it, and you can stuff the adhesive part into the bottle. It is said that if you freeze it in the refrigerator, the glue will fall off, so you can try it first.

4. Stick 502 glue on a small area, as long as you soak it in hot water, if a large area is stained with 502 glue, coated with acetone, and wait for about 5 10 minutes to remove.

What should I do if the 502 glue handle sticks ? When touching hands, you can wash your hands with soapy water, washing liquid, or pumice stones.

How to use: When using, first clean the rubber surface, remove the oil stain, and then apply glue on the joint surface, the amount of glue should be moderate, (each drop of glue can be coated with 8 10cm2), anastomosis the glue joint surface and appropriate force pressure, wait for a while to stick firmly. The maximum bond strength is reached within 24 hours before the adhesive can be delivered.

Safety matters: This product adheres quickly, prevents ** and clothing from being adhered to during operation, this product has weak tear gas, be careful not to splash into the eyes, and pay attention to ventilation when using.

It's very simple to have fine sandpaper on your hands to wipe it immediately, if you really can't find it, you can rub it on the cement wall or the ground or steps, and finally use less flushing and rubbing your hands with hand cream.

Apply a wet towel directly to the glue stain, and after a period of time, 02 will become soft, and then wash it off.

Gently scrape it with a knife, it works, and it is best to soak it in hot water

Soak your hands in hot water and brush gently with a toothbrush, but it will take a little longer to get it down.

It's okay, I'll drop it in two days.

Put some oil and slowly pull it off.

It can be washed off with practical alcohol!

If you stay longer, it will fall off on its own.

It has been useful to soak in hot water before.

If it's 502, it's no longer possible to use warm water, but there is still a way to drop: 1. Use banana water to drop on the glue stains, and at the same time use an old toothbrush to constantly stir and brush, wait for the glue traces to become soft and take off, and then rinse with water, brush repeatedly, and brush until it is clean. Put an absorbent cloth on the back of the clothes with glue marks, then apply some white vinegar to the glue marks, and finally scrub it with cotton dipped in water 2 Drop 502 in place to melt the original 502, and then quickly wash it off with water, very smart!

3. With insulating oil, pour the insulating oil in the transformer on the table, and the 502 glue will quickly become soft and can be rubbed off quickly. 3. 502 glue is a kind of resin glue, as long as an organic solvent that dissolves the resin, such as acetone. However, inhalation of acetone is toxic, pay attention to the way to use it, and the adhesive part can be stuffed into the bottle.

It is said that if you put it in the refrigerator and freeze it, the glue will also fall off, so you can try it first Stick 502 glue on a small area, as long as you soak it in hot water, if you stain a large area with 502 glue, apply acetone, and wait about 5 10 minutes to remove ......

You can soak it in hot water, if not a lot, and cut off the glue in the hair.

502 get it on the hair, and the way to remove it:

1. Apply a wet towel directly to the glue stain, 502 will become soft after a period of time, and then wash it off.

2. Use insulating oil, the effect of insulating oil is very good, 502 glue can be softened quickly, and then it can be washed off directly.

3. Soaking your hair in warm water is fine, just soak it for 5-10 minutes.

4. Add 502 to your hair to melt the original 502, then quickly wash it off with water.

5. Apply the vinegar evenly on the 502 on the hair with a cotton swab, and after the vinegar spreads, rub it back and forth on the self-adhesive with a cotton cloth, and the self-adhesive will peel off.

Pour some shampoo in hot water and steep for a while.

Don't worry about it, it'll fall off in a few days.

thinner, the so-called banana water.

Don't move, it will evaporate after a while.