Xiaobai, ask for ZTE N760 flash package and tutorial!

Go to the major forums, Protoss or Android forums.

2.Open the line brush, switch to the one-click brick rescue interface, and click the "OK" button after completing the "Confirm steps before flashing".

3.If you have a local brushless package, you can enter the model in the search box, click the "Search ROM" button, and click the "One-click Flash" button in the search results to start flashing the package-**After completion, click "Flash Now" to start flashing:

4.If there is already a flash package locally, click the "Select Local ROM" button to open the interface for selecting a RAM package, and click the "Open" button after selecting the flash package

5.Enter the parsing package page

6.After the unpacking is complete, start scanning the flashing port:

7.Install the flashing driver:

If it is the first time to start the line brush, or you have not installed the flash driver, please click "Fully automatic installation of the flash driver":

Enter the installation driver interface, if the Windows security prompt pops up, click "Always install this driver software":

8.After installing the driver, if the port cannot be scanned for a long time, you can manually enter the flash mode according to the interface operation guide

10.Jump to the flashing success interface, and the flashing is complete!

How to boot ZTE N760 Hello! Pro+AnswerPress the volume up button + function key left button (the leftmost one) + boot key to boot a lot of English,,Then use the volume key to adjust to the penultimate item,,Press the right button to confirm。 Press the right button to confirm the reset after pressing to the English text.

The power on button is at**.

The power button of an Android phone is generally in the upper left corner or right.

Dear, up there, dear, next to the headphone jack, dear.

Expect the masters. I haven't tried this.

Flashing is very simple, Deepin Android forum has corresponding flashing packages and tutorials, you might as well try it.

Brush elf, Master Zhuo, Master Brush, there will always be one for you, and it's an honor to be available.

No, you can contact me 7444, remove 694, Chinese 29 is my q

3.After opening the interface, press Enter.

4.After that, an interface will appear, please follow the prompts.

5.After following the above prompts, if the connection is normal, you will be prompted to recover and flash in.

6.Once done, wait 10 seconds for your phone to restart automatically7After the restart, recovery is successfully flashed.

Check whether the recovery flashing is successful: shut down, at this time, keep pressing and holding the menu key + volume up + power button until you enter an interface with yellow characters on a black background, which represents success.

Recovery button description.

Volume on the Menu key for up volume down and Middle House for down.

Back button Return power button After confirming that the recovery is flashed, you can enter the ZTE N960 flashing tutorial to get the root permission in the next step.

【Card Flashing Tutorial】introduces two methods.

1) One-click flashing.

Use flashing software to flash your phone with one click, such as flashing assistant, which is very simple, pay attention to backup.

2) Card swiping. Brush in according to the regular card swiping process, pay attention to brush the third-party REC, and double clear before flashing into the bag, battery power, and available memory!

The swiping steps are as follows:

Step 1: Import third-party recovery (if you want to flash third-party ROM, third-party recovery is indispensable; If you have already flashed the three-way recovery before, you don't need it.

I'm going to brush it again).

Step 2: Swipe the third-party ROM package (card swiping).

2.Enter Recovery mode.

In the shutdown state, press and hold the volume up + power on button to turn on, and press and hold the two buttons until you enter recovery;

In the boot state, select "Restart", press and hold the volume button to enter recovery mode;

3.Wipe Data Factory Reset (Wipe out all data) (the volume button controls up and down, and the power button is OK, the same below).

4. yes

5.Wipe cache partition

6. yes

7.Install Zip from SDCARD

8.Choose Zip from SDCARD

9.Find the installation package and open it.

10 Finally, choose to restart the phone, congratulations on the successful flashing! (It takes about 2-3 minutes to turn on the device for the first time, please be patient).

Note: Make a backup before flashing, and be cautious when flashing!